Power Mac :: Can Put Ilife 11 On Power Mac G4
Apr 7, 2012can i put ilife on my power mac g4?
Info:
PowerMac, Mac OS X (10.5.8)
ADVERTISEMENT
Power Mac :: Which ILife Is Compatible
May 17, 2012I have a powerpc g5 with a dual 1.8ghz which ilife that has imovie is most compatable.
Info:
PowerMac, Mac OS X (10.5.8)
OS X V10.5 Leopard :: Is Ilife Installed On Power-mac G4
Apr 9, 2012did ilife come with the software on leopard?
Info:
PowerMac, Mac OS X (10.5.8)
Power Mac G5 :: Machine Stuck At Grey Apple Screen After ILife 08 Install
Dec 5, 2007This machine has been running fine. I installed ilife8 - had eyeTV running. It was slow, hanging, unhappy so I rebooted. It took a long time but eventually restarted - got the chime and after a few seconds the white screen/grey apple. No spinning wheel - no nothing. After a few minutes the CPU fans slowly go to full scream. Have to hold power switch to shut down. Won't go into single user mode, won't boot CD (can't even get the CD out of the machine, but the dvd never spins up). I've pulled all the memory except the original apple mem. I've tried my Kinston mem. There is nothing else in the machine that isn't pure apple.
Information:
G5 dual 2.5 up to date Tiger
Mac OS X (10.4.11)
PowerPC :: Powerbook G4 Won't Power Up - Battery Indicator Showed One Flickering Power Circle?
Mar 19, 2008My girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedPowerPC :: IBook G4 - When I Press Power Button, Power Fan Comes On, But No Picture Shows
Feb 10, 2008I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedHardware :: Repair 23" Cinema Display (no Power After Power Surge)
Apr 18, 2008I had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
View 10 Replies View RelatedPower Mac G5 :: G5 Power Supply Beeping/Churping Corrected With Leopard
Nov 8, 2007I made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
Power Mac G5 :: Finding 23 Inch Cinema Display 90w Power Adapter
Nov 19, 2007Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
OS X :: Firewire Audio & Intel CPU Power Management Causes CPU Draw More Power?
Jun 19, 2010I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies View RelatedPower Mac :: What Steps Need To Take To Isolate A Graphics Card Failure In A Power Mac G5
May 29, 2012a friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View RelatedPower Mac G5 :: Using Molex Power Supply For Graphics Card
Oct 8, 2007I hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
Power Mac G5 :: Frequent Required Power Cycling Of Dsl Modem?
Nov 18, 2007I have the problem that I need to frequently power cycle (shut off and on) my dsl modem to maintain a reasonable speed with my internet connection. It is making the internet experience pretty user unfriendly. Does any one know whether there is a way to optimize my internet connection such that this is not required so frequently (couple times a day)? I am on my second dsl modem, and the same problem has occurred with each of them. ATT simply advises me that my solution is to power cycle the modem to sync the system, whatever that means.
Information:
Power Mac Dual 2.0 GHz
Mac OS X (10.5.1)
ATT DSL Internet Connection
Power Mac G5 :: Won't Boot Up Blinking Power Button After Adding Ram
Dec 6, 2007I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
Power Mac G5 :: Dual 1.8 Not Booting When Pressing The Power Button
Dec 13, 2007I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
PowerPC :: Making Power Button Shut Power Mac Off?
Oct 7, 2006I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
IMac :: Turn On The Power Without Pressing The Power From Button?
Mar 21, 2009i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View RelatedMacBook Pro :: Power Cable For MagSafe Power Supply?
Jun 26, 2009Anyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.
View 3 Replies View RelatedMacBook :: Lose Power To It Within Three Minutes After Power Cord Comes Off?
Apr 9, 2012Last Thursday I down loaded software updates from apple and have been losing power very quickly ever since. It just seems like as soon as I remove the power cord I lose power with in three minutes.
Info:
MacBook, iOS 5.0.1, purchased feb 2009
Power Mac :: G4 Doesn't Power On Internal Battery Replaced?
Apr 30, 2012tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
Power Mac :: Install An Airport Card Into A Power Mac G4 - DDR SDRAM?
May 15, 2012I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Info:
PowerMac, Mac OS X (10.4.11)
MacBook Pro :: 10.7.4 Becomes Slow After Unplugging The Power But When Power Is On It Works Normally?
Jun 13, 2012I've been suffering of slow speed on my macbook pro, and this happens when I unplug it from power and just let the battery works itself, then the % CPU usage increases dramatically to 330%Â and the laptop becomes very very slow, what should I do? Because if my macbook is off-power, it doesn't work properly, so what is the point to own a portable computer?
Info:
MacBookPro, Mac OS X (10.7.4)
MacBook Air :: Identifying The Right Power Adapter And Power Cord?
Jul 6, 2012Can I use existing 85w magsafe adapter from existing macbook pro with new MBA 13 magsafe2 port ?
Info:
MacBook Air
Power Mac G5 :: Wants To Update Power Mac G5 1.8GHz Firmware ?
Nov 23, 2007I have a problem described by Apple in document Power Mac G5 (Late 2004) 1.8GHz models stop responding randomly.
How can I update the firmware because my G5 1.8 screen is blank? Thought that I could make my G5 1.8 as a hard disk for my MacBook, or I may try to update over the network. Is there a risk of corrupting my MacBook if I try?
Information:
G5 1.8
Mac OS X (10.4.10)
McaBook
Power Mac :: G5 2.3ghz Power Supply Removal?
Mar 2, 2012Power supply partially expired on my 2.3GHz G5. Have found a donor. Manual says remove logic board before power supply. But you could remove power supply with board in situ on older G5s...
Info:
PowerMac, Mac OS X (10.4.1)
Power Mac :: Upgrading From 10.4.11 To 10.5.8Â On My G4 Power Mac Digital Audio?
Mar 26, 2012I still have the same G4 Digital Audio which came used but with a clean OS, which I managed to up grade to reach the 10.4.11. Its works great and I love it. I can only imagine using a real Mac Pro 2012. The software is legacy and It will not support the QuarkExpress9 for example. So what if I found and upgraded to the 10.5.8 or the max OS my G4 can handle? Is it worth it?Â
Info:
G4 Digital Audio, Mac OS X (10.4)
Power Mac :: Wake From Sleep Only With Power Button?
Mar 27, 2012I still use this old PowerMac G4 (hopefully Apple builds a new MacPro soon!) and when not using it, it is in sleep mode.Unfortunately my cats like to touch the keyboard, thus waking up my Mac.Is it possible to wake the mac only by pressing the power button?
Info:
Dual 1 GHz PowerPC G4, Mac OS X (10.5.8),
OS X Yosemite :: All Power Settings Are Set For No Power Usage
Dec 1, 2014a MacBook Pro, Retina, mid 2012 running Yosemite 10.10.1...I've noticed that since upgrading to Yosemite, if I close the lid on my computer to put it to sleep and then leave it overnight, it is completely drained by morning. It used to burn through, MAYBE 5% overnight. All the power settings are set for no power usage, i.e., no power nap, no wake for network, etc. If I look in the system log, I see something that happens every hour while it's asleep. I've included an excerpt below.Â
11/26/14 5:30:55.666 AM identityservicesd[220]: [Warning] ====== IDS Traffic Usage:
11/26/14 5:30:55.666 AM identityservicesd[220]: [Warning]Â Â Â Service: com.apple.private.alloy.icloudpairing
11/26/14 5:30:55.667 AM identityservicesd[220]: [Warning]Â Â Â Â Â outgoing-messages: 3
11/26/14 5:30:55.667 AM identityservicesd[220]: [Warning]
[code]....
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
Power Mac :: G5 Turns On But No Power Light
Feb 5, 2012Today I turned on my G5 to recover some files off an old iMac hard drive (can't very well read HFS+ using Windows), and my G5 refused to boot. Your press the power button, the power light flashes normally when you press on the button, but it powers on but the power light never comes on and there isn't a "bong" sound. The fans come on normally, but after a while the fans start picking up speed until they are at full speed.
I tried swapping ram, no change. Pulling ram, no flashing lights, pulling air deflector shield, full speed fans and red light (tells me something is working at least), swapping the video card, pulling the video card and still nothing. The 17" Studio Display power button works to turn on the system, but it has no light either saying the computer is on.
Based on the full speed fans after a while, I'm willing to say I have a failed processor, but that is just a wild guess as I don't normally work with Macs. The system is a Dual 2 GHz Power Mac G5 with 2 gigs ram, 80 GB hard drive, Plextor PX-712A DVD burner (I got this with a DVD-ROM), stock Radeon 9600 Pro and an Airport Extreme card. It runs Mac OS 10.5.8 and has worked great up until today.
Info:
PowerMac, Mac OS X (10.5.8), Late 2004 2 GHz Dual Processor
Power Mac :: No Power, Unable To Turn On?
Feb 19, 2012Older Power Mac G5 Dual Quad will not turn on. Just turned off while working. Good news everything backed up. Can anyone offer help to solve problem??
Info:
PowerMac
