Power Mac :: Buy A G4 Quicksilver And Install The Latest Hardware I.e. I5, SSD Etc?

Apr 8, 2012

I would like to buy a power mac G4 quicksilver and install the latest hardware i.e. i5, SSD etc.

Info:
Mac Pro

View 2 Replies


ADVERTISEMENT

Applications :: Finding Latest Quicksilver Version

Jan 26, 2009

i need to reinstall Quicksilver into my MBP but the website is currently offering only the Beta to Quicksilver and the old version sub-page is out of order. Does anyone know where I might be able to obtain the last stable (non-beta) version of Quicksilver?

View 4 Replies View Related

Power Mac :: G4 Quicksilver Logic Board RED LIGHT?

Mar 12, 2012

I've been using my pmg4 for a while, just recently I noticed that there is a red light located on the logic board on corner of processor heatsink and ram boards. this light is active during when the computer is on. the computer did not misbehave but is it trying to say something? is this normal operation?

Info:
Mac Pro, Mac OS X (10.7.2), MacBook Pro 13.3 | Logic Studio |

View 3 Replies View Related

Power Mac :: G4 Quicksilver Failing To Startup After Chime

Mar 12, 2012

My usually stable 10 year old G4 hard drive (attached to VGA monitor) is having serious problems with it's starting up process, so I am presently nursing it along (without shutting down at the end of the day) by using sleep mode. If I shut it down, chances are it fails to power up again. When I press the power on button to startup, I hear the chime and the startup process as usual, then everything stops within seconds, before the monitor screen is due to come on. The two external devices attached are the keyboard with mouse, plus a USB hub. No recent upgrades or changes. Everything is backed up on an external firewire disk. Since this trouble started a few days ago I have replaced the lithum battery and managed to successfully start it up only once (after a number of attempts) so I can nurse it along. I have tried all the usual troublshooting - when I restart in either safe, verbose, or reboot off OSX CD, single user mode, extensions off, or try to reset the PRAM fails to chime twice - in every instance it won't get past the chime. Checking the system profiler 'power on self test' indicates 'failed', failure type is 'external cache'. As I can't reboot off the OSX10 or systemworks CD I can't run Diskwarrior on the operating system or reinstall the operating system. So, I am now at the limit of my capabilities.

Info:PowerMac, Mac OS X (10.5.8), G4 Quicksilver 2002 Dual 1GHz

View 1 Replies View Related

PowerPC :: Quicksilver Power Supply On A Gigabit Motherboard?

Mar 7, 2008

Recently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.

Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?

View 2 Replies View Related

Software :: Power Mac G4 Quicksilver 2002 - Fails To Come Back Out From Screen Saver Mode

Apr 18, 2009

My PowerMac G4 has an issue that has developed as of late where it goes into screen saver mode and fails to come back out of it. The mouse and keyboard are both unresponsive. Sometimes it goes back to the desktop and sometimes it doesn't. The only way to shut it off is to push and hold down on the power button. I have added an HP all in one printer to the computer.

View 2 Replies View Related

OS X V10.5 Leopard :: Install The Latest Version Of ITunes, Need To Install 10.5

Jun 9, 2012

I'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?

Info:
iMac, Mac OS X (10.4.11)

View 2 Replies View Related

PowerPC :: G4 Power Mac "Quicksilver" - Compatibility?

Apr 7, 2008

I am buying a G4 Power Mac. I was wondering if anyone knows what the capabilities are of this computer. Can the RAM be upgraded to 2 or 4GB? Graphics card? As far as I know, Leopard can be installed so I am good with the OS. Oh, and a friend told me the Power Mac is like a Mac Pro but older. Is this true? Like can the Power Mac house multiple processors and hard drives?

View 14 Replies View Related

Power Mac :: What Is The Latest OS And Version Of ITunes Can Be Run On G5

Jun 6, 2012

What is the latest OS and version of iTunes I can run on my dual 2 Ghz PowerPC G5?

Info:
G4 Dual 2.0, 1 gig RAM

View 1 Replies View Related

Power Mac :: Which Of The Latest OS X Versions Will Run On G5 Quad (2005)?

Mar 5, 2012

I inherited a PowerPC G5 Quad Processor (2005?) with 2 video cards and PowerPC G5 dual processor.  The hard drives have no OS on them so I'm investigating which OS will run on them.  I would really like to put Lion on them, but I'll use whatever will work.

Info:
PowerMac

View 3 Replies View Related

OS X :: Mac Install Disk Comes With 10.5.6 Update It To Latest 10.5.8

Sep 10, 2009

I'm selling my macbook pro, going to do a fresh format before that. But my mac install disk comes with 10.5.6
I want to update it to latest 10.5.8, in order to do that I need to log in an account to perform the update but for that the buyer will not experience the leopard first start up music. How can I update it without creating an account so the buyer can feel like getting a first hand on it?

View 1 Replies View Related

OS X :: Latest Update Install Failed At 25%

Jan 5, 2010

I've got a Macbook with with Leopard v10.5-something installed. When I installed the latest update and was at about 25% done with the "writing"-part it suddenly failed. I got a message prompting to restart (I think it said that it was something wrong with the source from which it was writing), when I restart the computer I get another message promting me to restart. My backup is a few months old, so I wonder if there is some way around my problem?

View 9 Replies View Related

Unable To Install Latest Version Of OSX

May 15, 2012

I have error messages in both imail and ical. I am unable to install the latest version of OSX. I am now on 10.7.3.

Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)

View 6 Replies View Related

MacBook Pro :: Can Install Latest OS X 10.9 Mavericks

Aug 22, 2014

I have a 2006 MacBook Pro 2.1 17inch with 2.33 GHz Intel Core 2 Duo CPU and 4 Gb RAM.  Can I install the latest OS X 10.9 Mavericks on it?

Info:
MacBook Pro, Mac OS X (10.6.8)

View 1 Replies View Related

MacBook Pro :: 15" Latest Generation (bought Today) Makes A Noise At Power On?

Jul 1, 2012

Just opened my new macbook pro 15" and when i turned it on (and every time i turn it on), it makes a strange noise. seems to come from the front but it stops after a second or two. almost sounds like it's a disk drive spinning up. Is this normal? It doesn't sound like it's anything bad, it actually sounds like a standard pc based laptop sounds when booting up. I just thought the macbooks were supposed to have almost whisper quiet components. I still love it, and I'm glad I bought it.

View 7 Replies View Related

IMac :: Can't Install Updates To Latest Version

Oct 23, 2010

I have a mac OSX version 10.5.8 and i was trying to install the ilife 11 i just bought and was super excited about but when i tryed to download ilife 11 it said i needed to update my computer, so i went and downloaded the updates but my mac still says its the same version! and ilife wont install... I tried to go back and install the updates again but there not there it says I'm all updated! but 10.5.8 is not the latest version right ? What should I do?

View 4 Replies View Related

OS X :: Getting Prompt To Install Latest Update For Mac And Safari

Dec 16, 2008

I'm getting a prompt to install the latest update for OSX and Safari. Can download it okay but when it gets to 'configuring' it stalls. Not doing anything. I have to hold the power button down to shut down then start the system up again. This has happened three times. Anyone else have this? Anyone know what is up with it?

View 3 Replies View Related

OS X :: PPC G5 ( 10.4.11 ) Won't Start Up After Install Of Latest Security Update

Feb 21, 2009

after install, only get the spinning card- no startup. tried all startup key combinations and zapped PRAM. also ran disc utility and hardware check- hardware is fine all I get is nothing. noticed others reporting problems with the update on another thread, but my mac won't even start up. do not want to have to reinstall OS and 3rd party apps. any suggestions? would it help to take to apple store geniuses- can they somehow bypass the update and get it started up?

View 2 Replies View Related

OS X :: Can't Install The Latest Safari/Security Software

Oct 23, 2009

I went out and got the new Nano 16g and had to install the latest version of itunes to get it to work. No problem, everything was working fine for a couple of days. I tried to browse the itunes store today, but it wouldn't work and a message stating that I need the latest version of Safari to access the itunes store.

I tried to download Safari but it wouldn't work, because apparently, I need the latest security update before I can get Safari to download. I have tried to get the Security to download a few times now and a message stating "Security won't download to your computer". This has become frustrating and I am limited with my mac skills and computer skills in general.

I have the older 10.4.11 core 2 duo osx. I think I am choosing the appropriate software options. (Tiger) I have enough memory left on my computer as well.

View 2 Replies View Related

MacBook Pro :: Latest Software Update Will Not Install?

Jul 2, 2012

I have a MacBook Pro running 10.6.8 and the latest updates do not want to install. It downloads fine looks like it installs, but end up with a "An Undexpected Error Occurred." I've had this machine for 3 years now and have never encountered an update problem before.

I've run Disk Repair and results were there were no problems.

MickeymacesMacBook Pro, Mac OS X (10.6.8)

View 7 Replies View Related

OS X Mavericks :: Clean Install Of Latest OSX On Replacement HD

Sep 1, 2014

I'm replacing the stock HD with a new SSD and I'd like to have a clean install of latest OSX. I think if I use the recovery disks that it will install an older version of OSX (10.4) but I want the latest 10.9.4 installed right away and avoid having to do an upgrade. 

Info:
Final Cut Pro X, OS X Mavericks (10.9)

View 6 Replies View Related

OS X V10.7 Lion :: Tried To Install Latest System Upgrade On Pro - Won't Restart

Feb 3, 2012

Tried to install latest system upgrade on Pro. Won't restart. Bootstrapper crashed: trace/bpt trap:5. What can I do to get my computer working?

Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)

View 5 Replies View Related

OS X V10.6 Snow Leopard :: Download And Install The Latest Updates?

Jun 16, 2012

I have deleted programs, old files Always download and install the latest updates. I have even installed that Mackeeper software. But my Macbook pro is running like extremely slow.

Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.6.8)

View 2 Replies View Related

Power Mac :: Install An Airport Card Into A Power Mac G4 - DDR SDRAM?

May 15, 2012

I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?

Info:
PowerMac, Mac OS X (10.4.11)

View 4 Replies View Related

Power Mac G5 :: Tried To Install Got A Fail To Install Due To A Source Problem?

Dec 14, 2007

I bought the family pack for Leopard. I installed Leopard on my G4 laptop fine.When I tried tried to install on my G5 I got a fail to install due to a source problem (?)In any event I restarted from the Tiger hard drive and it's totally screwed up my computer. It tries to start and I get initial Apple logo for about 2 seconds then it locks up and I get a bunch of computer code.

Information:
G5
Mac OS X (10.4.9)

View 4 Replies View Related

Power Mac :: Pro G5 - How To Install OS In It

May 11, 2012

mac g5 dual-core 1.8 ghz, 3.6gbram, newly installed ide dvdrom & burner (for pc, actually, works well on mac).sata 160gb hdd. i just got this mac g5 from a a friend, very cheap, its a old mac, but its ok. there is no osx  or other operating system installed, the pmu has been resettet, and a new battery for bios has been inserted correctly. now that i cant get or have any leopard osx 10.5.8, i just need any linux os to install, in order to see if the mac is ok.later on, i will buy a second hand legal osx leopard 10.5.8 any tools, i can download, to check for hard disk is present, emery checking at start up / boot up ?, the dvdrom jumper has been set to master. the sata hdd has no jumper. i did now got hands on a linux ubuntu 10.4 lts sio, and burned it with windows 7 and my pc burner (i really don't know if this is the right way to do it, can pc burn the iso correctly ?, even if i can see all the folders and files on the cd ?, which i can!). i tried it, the mac dvdrom works, its reading the cd (pressing the option on power up/ startup).in the startup bios,

i can see linux as a thumbnail picture, which i can select, and the cd loads all necessary drivers to memory etc.then the boot shell screen appears, explaining me to press return key, or choose other option. i did choose pressing the return key. mac is reading the cd, until a few seconds later a black screen appears and nothing happens!.i also tried live install.it could be a graphics driver problem ? ( the graphics card is, i think, a geforce 5500 fx ultra 128mb agp). the mac did work perfect before i got it, with osx and apps, every thing was ok, but my friend gave me this with a clean install, no osx. from this, experience i can see, that the mac cpu, dvdrom, motherboard and, memory / graphics card is working perfect.i am in doubt about the hardddisk, shouldn't the led on the front case blink, meaning it reading from the hard-disk ?.later on i will try the hdd and dvdrom to try different jumper position, and try another linux distro, eventually i should be able get this mac up and running! otherwise i have to get another old mac g5, which i have to pay alot, properly?. hope not. apple wants 100£ for a leopard dvd. they must be kidding!. (i will buy a second hand osx). i just bought an iPhone 4s, and mac mini 2011, a week ago.

Info:
PowerMac, Mac OS X (10.5.8)

View 6 Replies View Related

Power Mac :: Can't Get OSX 10.5.1 To Install On Powermac G5

Mar 3, 2012

I have an older Power Mac G5 Which is running OSX 10.4.11 and I procured a retail copy of OSX 10.5.1 Single Disc Install DVD. I tried to load it and it does not load and it appears to be frozen with a grey screen and the apple icon. I let it run for over an hour and nothing seems to be happening. [code]

Info:
PowerMac, Mac OS X (10.4.11)

View 14 Replies View Related

Power Mac :: Way To Install Garageband On G5?

May 21, 2012

Is there any way to install Garageband on my Powermac G5?I really need it and i can only find newer versions for Mac os X 10.5 on the internet.

Info:
GarageBand '08, Mac OS X (10.4.11)

View 2 Replies View Related

Power Mac :: What Is Newest OS Can Install

Jun 13, 2012

I have a Power Mac G4 with dual 1.25GHz Power PC G4 processor with 2Gb SDRAM.I am on OS X 10.5.8.Three questions:

1) Can I go to 10.6 or higher? 

2) If I change the processor out to an Intel, can I go higher?

3) Is there any upgrades that would allow me to put a later OS X version on it, and if there is, is it worth upgrading?

I know it's old, but it works fine, and this is my first Mac (I've had it for 1 year - It was given to me), and I am breaking myself slowly from the PC

Info:
PowerMac, Mac OS X (10.5.8), Power Mac G4, 2core 1.25GHz, NonInt

View 8 Replies View Related

Power Mac :: Install OS X 10.5 Without A CD, DVD Drive?

Jun 22, 2012

My cd/dvd drive busted WHILE I was upgrading the OS to 10.5.  Now I get the folder with the question mark when I start up, or a blank screen. Other than installing a new cd/dvd drive, how can I install the OS without the drive?  I only have other Intel Macs to use, no PPC.I don't believe Firewire/Target disk will help much in this case will it?  I don't need any data from the currently unreadable hard drive - luckily had transferred everything ahead of time, but also erased a backup OS 10.4 boot drive too soon. 

PowerMac Dual 1.8Mhz PPC

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved