I'm replacing the stock HD with a new SSD and I'd like to have a clean install of latest OSX. I think if I use the recovery disks that it will install an older version of OSX (10.4) but I want the latest 10.9.4 installed right away and avoid having to do an upgrade.
Info:
Final Cut Pro X, OS X Mavericks (10.9)
I have a 2006 MacBook Pro 2.1 17inch with 2.33 GHz Intel Core 2 Duo CPU and 4 Gb RAM. Can I install the latest OS X 10.9 Mavericks on it?
Info:
MacBook Pro, Mac OS X (10.6.8)
I decided to do a clean install of Mavericks to get rid of all the very old files hiding in my system folders. I made a start-up disk following online instructions, rebooted from the USB drive and wiped the drive and reinstalled Mavericks. Then I plugged in my Time machine backup drive and tried to recover particular folders from the latest backup. However, I am getting a permission error that prevents me from going into the old user folder from that backup. It has a red circle/line icon on the folder.
Info:
MacBook Pro, Mac OS X (10.6.3)
I just bought a used MacBook Pro off somebody online to replace my 2005 pre-Intel Power Mac, which still runs great but I'm just tired of lugging it around. The MacBook Pro was erased but still contains some of the old owner's information (computer name, accounts, etc), and before moving files over I'd like to just wipe it clean and reinstall the OS. He did give me the gray discs, but they are for 10.6 (Snow Leopard) but the computer has been upgraded to 10.7 (Lion); I fear by rebooting I would downgrade to 10.6 since that's the disc I have. Reinstalling 10.7 after 10.6 is out because I don't have the login info used to buy 10.7. I've also considered just keeping 10.6 and just upgrading to 10.8 whenever it comes out (likely soon).
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?
Info:
iMac, Mac OS X (10.4.11)
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
i just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
View 24 Replies View RelatedI purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View RelatedI have many questions but few clear answers. What would be the benefits of doing a clean install vs. an upgrade? I have an iMac 8,1 which supposedly is eligible for a 64 bit kernel. Would I have to do a clean install or an "archive and install" to get the 64bit kernel? Also, can someone explain to me exactly what an "archive and install" is/does? From the name, I'd assume it would back up your HDD to an external storage unit, then do a clean install, but I'm probably way wrong.
One more question. If I so happen to choose to do a clean install, would Time Machine be an adequate way to restore all my data after the update? Any help or answers to any of the above questions would truly make my day. You will also be rewarded $1,000,000,000 in Happy FunTime money.
I have recently done a Time machine back up of my MB Pro 15" then wiped my hard drive trying to clean it up so I could install Windows 7 with Boot Camp. I had my original Install Disk which I forgot was Tiger, Having used one of my brothers company licenses to upgrade to Leopard but that disk is now with him in another country. So now I can not restore from my Time Machine backup. I have a Leopard Install disk for a Macbook Pro 13" which I also own. Is it possible to use this disk to re-install Leopard on my 15"?
View 3 Replies View RelatedI'm selling my macbook pro, going to do a fresh format before that. But my mac install disk comes with 10.5.6
I want to update it to latest 10.5.8, in order to do that I need to log in an account to perform the update but for that the buyer will not experience the leopard first start up music. How can I update it without creating an account so the buyer can feel like getting a first hand on it?
I've got a Macbook with with Leopard v10.5-something installed. When I installed the latest update and was at about 25% done with the "writing"-part it suddenly failed. I got a message prompting to restart (I think it said that it was something wrong with the source from which it was writing), when I restart the computer I get another message promting me to restart. My backup is a few months old, so I wonder if there is some way around my problem?
View 9 Replies View RelatedI have error messages in both imail and ical. I am unable to install the latest version of OSX. I am now on 10.7.3.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I'm a newbie, forgive my question but I just did an Install and Archive yesterday, but I don't know if I really should be doing a CLEAN INSTALL...
FACTS - I have an MB403LL/A (2.4GHz C2D, 2008 Early Peryn) which I use to make music with ProTools 8 LE and Reason 4.0.
- Upgraded RAM from Corsair to OWC RAM (4GB)
- Before the Install & Archive yesterday I was experiencing problems with Safari freezing up and not being able to relaunch. I believe this was due to the RAM, hence, I bought new and better RAM.
- I could not boot up my MacBook one morning, so I trouble-shot it and the only thing I could do was Re-Install the OS X.
- I did the Install & Archive with the OEM Samsung RAM and put in the OWC RAM AFTER that.
QUESTIONS - I would like to really have a fresh install of everything but not sure if there is much difference between the Clean Install and the Archive and Install? (I would just move the files I need to my external HD)
- With the Clean Install - will I be bringing my MacBook back to where it was fresh from the factory?
Should I buy the AppleCare for it? I was thinking of upgrading but there is not much difference in performance to what I have... 2.4 C2D at 4GB RAM...
The computer was working fine before the update. Now, it blinks the active screen when I try to load anything. I can't use my softwares or browse on network.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4), Latest update with Safari 7.0.6
I have a mac OSX version 10.5.8 and i was trying to install the ilife 11 i just bought and was super excited about but when i tryed to download ilife 11 it said i needed to update my computer, so i went and downloaded the updates but my mac still says its the same version! and ilife wont install... I tried to go back and install the updates again but there not there it says I'm all updated! but 10.5.8 is not the latest version right ? What should I do?
View 4 Replies View RelatedI'm getting a prompt to install the latest update for OSX and Safari. Can download it okay but when it gets to 'configuring' it stalls. Not doing anything. I have to hold the power button down to shut down then start the system up again. This has happened three times. Anyone else have this? Anyone know what is up with it?
View 3 Replies View Relatedafter install, only get the spinning card- no startup. tried all startup key combinations and zapped PRAM. also ran disc utility and hardware check- hardware is fine all I get is nothing. noticed others reporting problems with the update on another thread, but my mac won't even start up. do not want to have to reinstall OS and 3rd party apps. any suggestions? would it help to take to apple store geniuses- can they somehow bypass the update and get it started up?
View 2 Replies View RelatedI went out and got the new Nano 16g and had to install the latest version of itunes to get it to work. No problem, everything was working fine for a couple of days. I tried to browse the itunes store today, but it wouldn't work and a message stating that I need the latest version of Safari to access the itunes store.
I tried to download Safari but it wouldn't work, because apparently, I need the latest security update before I can get Safari to download. I have tried to get the Security to download a few times now and a message stating "Security won't download to your computer". This has become frustrating and I am limited with my mac skills and computer skills in general.
I have the older 10.4.11 core 2 duo osx. I think I am choosing the appropriate software options. (Tiger) I have enough memory left on my computer as well.
I would like to buy a power mac G4 quicksilver and install the latest hardware i.e. i5, SSD etc.
Info:
Mac Pro
I have a MacBook Pro running 10.6.8 and the latest updates do not want to install. It downloads fine looks like it installs, but end up with a "An Undexpected Error Occurred." I've had this machine for 3 years now and have never encountered an update problem before.
I've run Disk Repair and results were there were no problems.
MickeymacesMacBook Pro, Mac OS X (10.6.8)
how to get replacement install discs for an older imac? I have a 20-inch 2.0Ghz 1GB ram, 250GB imac (vintage 2007) that I have misplaced the original install disks and I need to wipe it clean and re-image the whole system.
Info:
MacBook Air, Mac OS X (10.5.8)
I did the latest update from Apple and now my iPhoto won't open. It says it supported on this type of Mac. I've been using it for 2 years!! What do I need to do?
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.3)
Tried to install latest system upgrade on Pro. Won't restart. Bootstrapper crashed: trace/bpt trap:5. What can I do to get my computer working?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I have deleted programs, old files Always download and install the latest updates. I have even installed that Mackeeper software. But my Macbook pro is running like extremely slow.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.6.8)
My friend purchased a used Macbook and needed to reinstall Leopard on it (to remove the previous owner's junk), so he borrowed my install DVDs. Alas, the first DVD got stuck in the combo drive, so he had to send it in (under Future Shop's Product Replacement Plan, not under AppleCare, but FS sent it to Apple for repair). When he got it back, many weeks later, the DVD didn't work and could not be booted from. Will Apple give me a replacement? Does it matter which one of us calls? I'm thinking they might want the serial number to find the incident information, and since it's his Mac that was sent in, that he should call.
will they let me purchase a replacement OEM DVD (with iLife and everything that came with my Macbook)? Anyone know how much?
So I bought my Macbook August of 2007, and have only Archive & Installed when Leopard came out.
I don't have any noticeable problems yet I know a lot of people wipe their computer clean, back-up any important programs and files, and then re-install their OS. Do a lot of people do this?
I kind of want to but it's my first time doing it so I don't want to mess anything up or forget something I need, etc.
I am getting my UTD disc next week sometime, and I would like to know how to do a clean install with it.
Before I would put the disc in, then go into the install process through finder, the computer would reboot, and then I could access disc utility from the top bar and just erase my disc.
Then I would continue and install the new OS on my blank hard drive. With the UTD disc, I hear people saying that you have to delete a file on the disc? Which file is this?
