Power Mac :: Grey Screen/spinner Keeps Going
May 14, 2012My G5 will start up, but it will stay on the grey Apple screen and spinner keeps spinning. What should I do?
Info:
Mac G5
My G5 will start up, but it will stay on the grey Apple screen and spinner keeps spinning. What should I do?
Info:
Mac G5
Pretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
When I turn on my computer, the wheel keeps spinning and stops on the grey apple screen. If I leave it there for a few minutes, the fan gets really loud.
I tried pressing Apple, Option, P, R, but it only chimes once.
I also tried holding down shift and restarting.
And I tried holding down option and restarting.
I even tried to take out the memory and put it back in.
Nothing is working.
I have the startup disks, but I don't know how to put them in the cd drive.
Since the computer won't boot up, I can't open the tray.
When I press the power button a grey screen comes on and it won't go away
Info:
MacBook Pro with Retina display, iOS 7.1.1
This machine has been running fine. I installed ilife8 - had eyeTV running. It was slow, hanging, unhappy so I rebooted. It took a long time but eventually restarted - got the chime and after a few seconds the white screen/grey apple. No spinning wheel - no nothing. After a few minutes the CPU fans slowly go to full scream. Have to hold power switch to shut down. Won't go into single user mode, won't boot CD (can't even get the CD out of the machine, but the dvd never spins up). I've pulled all the memory except the original apple mem. I've tried my Kinston mem. There is nothing else in the machine that isn't pure apple.
Information:
G5 dual 2.5 up to date Tiger
Mac OS X (10.4.11)
My power mac g5 has suddenly started to shut itself down in the early stages of boot up. The apple logo appears and the spinning timer logo spins befor a complete shut down.Â
I have used my o/s disc to access the disk utility. Repair disc is not an option. Verify disc is an option but this process fails due to " invalid nodes" Â
Info:
iPad 2, Mac OS X (10.5.8), G5 PPC 1.8ghz, iPhone4
I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
Information:
MacBook Pro
Mac OS X (10.4.10)
Grey Screen, Spinning Gear
macbook pro hung up on gray screen/spinner after reboot.
Info:
MacBook Pro
macbook pro frozen on gray screen with spinner.
Info:
MacBook Pro
I Was having some trouble a few days ago with my computer running slow with basic tasks, would give me the rainbow spinner frequently. I have a feeling it might be because of some music I downloaded from a torrent website (?) so i decided to do a hard shut down a few days ago by holding the power button down and left it alone until today, where it asked me to log in and then had the pop up that said something like "your computer was shut down unexpectedly, would you like to open all the apps you had running" or something along those lines and I hit cancel instead of yes because i wanted the computer to start new with nothing open. Well after I hit cancel and logged in with my administrator password, it will not load my computer past the log in screen and just has me stuck on that screen with the rainbow spinner. Not sure what to do, I'm afraid of repeatedly doing hard shut downs. Not sure if I have a virus from the songs I downloaded but I don't think I'll be downloading anymore.
View 2 Replies View RelatedMy 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
Upon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen.Â
Info:
iMac, Mavericks upgrade
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect.
I've tried rebooting NVRAM - no effect.
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedWhenever I try to use Screen Sharing to control this one particular Mac Mini, and someone else is using the mini, and I pick "Connect to Virtual Display", I get dropped to a grey linen screen. Like the login screen, but without a list of usernames or anything. There it sits. Here is what I see in the console of the mac mini when I try and use a virtual display from the other machine:Â
3/10/12 7:30:04.291 AM mds: (Error) Backup: Couldn't stat source path '/Users/glados/Library/Saved Application State/com.apple.finder.savedState/window_3.data' -- importing from backup path instead
3/10/12 7:34:01.706 AM [0x0-0x9009].com.apple.systempreferences: System Preferences(148,0x7fff76017960) malloc: reference count underflow for 0x400440ce0, break on auto_refcount_underflow_error to debug.
[code]....
Info:
Mac mini, Mac OS X (10.7.3)
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.Â
Info:
MacBook Pro, OS Lion
Thing is I got hold of a 1ghz 17" iMac almost for free, it had a dead logicboard (I checked it with a voltage-meter), but I figured I could fix it and have a small hobby project-thingie going on. Well I just got a new logic board today, for a 1ghz 17" iMac g4.
Things is I only get a bright grey screen from my Mac when I boot. I've tried connecting it to a external display and that works fine. Everything is there.
I then reinstalled Tiger on it, with the computer connected to my external screen. And I still have the same problem. (I have now disconnected the ext. screen and is controlling the iMac from my MBP). So at least it isn't the installation.
So what is the problem? I can via an Apple Keyboard control the brightness on the blank screen, which would indicate that it does react to input of some degree.
I've read that if the inverter is dead or anything else is dead, you would get a rolling grey screen, flicker or something like that and not a steady bright grey. One thing I'm thinking is. What if somehow this logic board was for a 15" 1ghz imac g4? Can I check this?
I read that long thread about guys buying hi-res displays for their MBPs, and they had to replace some display profile? Could I maybe fix it with a different display profile-file?
I'm really confused by all this, and would appreciate any help I can get.
Model: PowerMac6,1
CPU-Type: PowerPC G4 (3.3)
and
the gfx chip is a GeforceMX4 with 32mb.
The display is a mode 9c27, manufacturer 610, serialnumber 00000, manufacture date: B84D7200.
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
THis only happens with HTML 5 videos. When fill sceen youtube the mouse on the second screen dissappears.
Info:
Mac Pro, Mac OS X (10.7.3)
I have a dual core 2007 macpro
-I just did an repair disk permissions
-it did not want to re start
-just a grey screen with apple logo
-hooked it up to my macbook as a firewire
-could not repair disk
-formatted MacHD
-copied from time machine but not all got copied only some random files
--still all I get now is a grey screen, sometimes with a grey folder and question mark
-tried to copy individual folders as library etc to the mac HD but only a few get copied
still just the chimes and a grey screen took out some of the 13 gig ram and juggled with that in case one is broken
I have a 2008 iMac and it continuously goes to the grey screen tell me to restart the PC.
I have reset the PRAM (alt+command+p+r) and even hooked it up to a macbook with a firewire and erased the iMac.
I am trying to boot off the CD and no matter what I do ....... Hold C or Hold Options it does nothing but go back to the grey screen.
So yesterday my iMac froze while using iTunes. I had to manually power it off. I turned it on again and it booted fine. I tried iTunes again and shortly after that it froze again. I manually shut it down again. I tried to turn it on once again and it won't load the desktop. It just stays at the grey screen with the apple and spinning thing. I am pretty sure I have to erase and install again, but I am not really sure on how to do it correctly especially since I can't even get to the desktop. My OS is 10.5.8 and the machine is only 2 years old and hasn't really given me any problems before.
View 2 Replies View RelatedCan a bad video card make a Mac Pro stall out at the grey screen, spinning ball, but yet able to boot in safe mode?
Info:
Mac Pro, Mac OS X (10.6.8)
i just updated efi firmware on my macbook pro (late 2011).. and my mbp always starts with a grey screen (not white screen anymore) and the apple logo with a status wheel evertime i turn it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
I came home to find my IMAC stuck at the grey apple screen with a circle of dots spinning...I've been trying to piece together the events that led up to this:
1) The night before I ran some updates including the osx 10.7.4 update and then selected restart and went to bed
2) THe next day my son says that they tried to put a DVD in and it was still on the grey screen...they inserted the DVD anyway
3) I tried unplugging etc and then rebooting but same grey screen
4) I rebooted with the track pad held down and it managed to eject the DVD
5) Now when rebooting i get 3 bleeps repeated, I've retried this a few times and its the same
6) I have rebooted using CMD R and see that the Macintosh HD is listed showing 466 GB free which I hope means that the other 534GB is still on there...not sure if I should repair itÂ
I've had this IMAC since January and am ashamed ot say that I DONT THINK I HAVE A BACK UP yet...I was ust about to buy an external HD big enough to back it up so VERY CONCERNED about losing my recently uploaded entire family home movie collection as I speak my wife is holding back the tears..
Info:
iMac, Mac OS X (10.7.2)
When my son's computer is turned on it just goes to grey screen.. I've tried a number of troubleshooting things...starting while holding "c" to boot with install disk...starting holding "shift" for safe boot. I did the PRM (?) reset thing holding Apple-option-p-r keys while starting and that did add the start up chime...before it would just go to the grey screen, no chime no spinning wheel...but still no boot.The computer is still under warranty but soonest appointment at Apple Store is 3 days from now!!!
View 4 Replies View RelatedI just restarted my MacPro2,1 (8 core 3 GHz, snow leopard) and well... I saw this bar that I haven't seen before
I was wondering what the hell this is because it also took longer to restart (the progress bar thingy)
I took a picture of it with my phone: Picture!
I have a weird problem going on currently. My 13 inch macbook pro (2009) works PERFECT but I've tried 3 times to update to the OSX to 10.6.3 or 10.6.4 and everytime the update works but after it reboots I get the grey screen of death.
When I have a time capable backup which I restore from when this happens so its not a big deal however whenever I restore I no longer have access to the old history. It's like the drive cannot go back in time. Is this normal?
I just got my macbook pro today. Turned it on, did an update and know I get a gret screen with the apple logo in the middle,
Info:
MacBook
Pro
Updated airport utility and macbook got stuck on progress bar. I restarted and it is now stuck at bootup screen.Â
View 3 Replies View Related