MacBook Pro :: Internal Monitor Not Turn On But External Display Works
Nov 12, 2009
I have seen people all over the internet saying that their MBP monitor would not turn on, but I have not seen my situation before. I used the computer a week ago (it's a work machine and I'm a part time intern) and both the external and internal monitor worked. I shut it down and when I came back the computer booted up to the external monitor but gave no video on the internal.
I shut down, removed the external monitor (connected by DVI cable) and rebooted. Nothing came up but when I connected the external again it worked fine. This had happened before, but when I shut down and rebooted without the cable connected it came back on immediately. I'm just hoping its not a bad graphics card or something that needs to go in for warranty.
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
I know that the web have a lot of tips similar to this that i will ask, but i couldn't find no one exactly with what i want
I bought a new monitor, and mini-dvi adapter, an external keyboard and mouse to plug on my macbook
I would like to know how to turn off the macbook display without having to close it. I want to know that because if i don't close the macbook, both displays are on. If i close the macbook, the computer goes to sleep and then i press some keys on keyboard and the mac wake. In that point, if i open my macbook the display is turned off like i want. But i don't want to have to close the macbook all the time, and i don't want to leave the macbook closed because closed the temperature goes high.
WITHOUT closing the lid, because i like using the touchpad. i know that you can turn the brightness all the way down, but sometimes windows from the main screen randomly open on the other display. and it also slows down performance. i want to turn off the 13" screen as if the lid was closed. that way, the mac doesn't even see it.
Is there a tweak out there that will disable the internal display while using an external monitor WITHOUT having to first close the lid on my macbook because I just leave my macbook plugged in for weeks a couple feet away from my desk and it's become a hassle to first close the lid, then move my mouse, then open the lid for better ventilation. I just want to leave it open and disable the display!
I have used an external 23" monitor with my macbook air for almost 2 years, i have had a few issues, mainly just temporary blackouts lasting for just a second or two, but also seen red screen (all colors become red), this was however just a rare issue and usually it was working just fine.i borrowed a friends macbook and connected with the same cable to the same screen, and it worked immediately with no issues.Â
the screen would go completely black or start flickering (haven't seen this flicker before), and i had to fiddle around with reconnecting to get it working. the next day when i turned it on i had no picture, i tried again and still nothing, so i decided to install the updates, including thunderport firmware update. Now i got the old glitches and lots of new ones, at the times when i assume it would have worked before i am just getting static (black and white dots randomly everwhere) i can also get red'ish screen with instense flickering, but mostly just completely black. I thought the problem could be my cable or the monitor itself, but that's not the issue since those worked immediately without any problem on my friends computer, so it must be the macbook air itself!
Computer: Macbook Pro 13 inch purchased Spring 2011 OS: Mac - Lion (10.7.3), Boot Camp - Windows 7 (64 bit) Utilizing an adaptor, I'm able to use my Samsung monitor without I problem when working in the Mac operating system. Unfortunatlely, when I switch to Windows 7 / Boot Camp partition, plugging in the Samsung makes both the external and laptop monitors go blank. I have spent hours researching this, but I have be unable to come up with solution. It seems like the problem might have something to do with the NVIDIA drivers.
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
I had not used my external monitor in the last several weeks. I believe there have been a few OSX Lion updates since the last time I used the external monitor. I had installed all the updates prior to connecting my external monitor again. However, a few days ago I tried to connect the external monitor and all I get is a "No Signal" message on my external monitor. The Mini DisplayPort to HDMI works on my LCD TV, so I know the MDP works. I have also replaced the MDP-to-DVI cord and the external display still doesn't work.Â
I connected the external monitor to another computer running Snow Leopard and the external monitor works. So, the external monitor does work.Â
I have seen a few posts aboout this, but nobody seems to have a solution that works or is directly on point to my issue. I have tried to use all the scenarios for plugging in the external monitor and external monitor power. I tried to reboot the laptop with and withoout the external monitor connected. Same thing with the exteernal monitor plugged in and no power, etc. Nothing works. I have tried to repeatedly turn the external monitor on and off while connected to the MacBook. Again, that doesn't work. Here is what I am running:Â
MacBook, Aluminum 13" Late 2008 OSX 10.7.3 NVIDIA GeForce 9400M
Info: MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
While watching today apple keynote. At the and i realized that my retina display is totally black. Mirror display through hdmi is ok, apple logo on back side of disply is not lighting.
I was successfully connected my MBP with External Display Philips 107T4, my question is How to Totally Turn of my LCD monitor so I can lid my MBP and use external monitor only. Recently I used this tips. Just restart my MBP and close the MBP, but I really thanks you, if any one have some another tips to do this without restart my MBP. (some times I have a lot off open document and I don't want to re open each document again).
On my 2008 24inch iMac the screen has a problem ( dead pixels ) and I will get it replaced in the future , in the mean time I have a very nice large external monitor connected to the iMac which I use ok, what I am looking for is a way at first when booting up , to be able to see both the iMac's screen and the external monitors screen, then some how shut off / make blank the iMacs screen only leaving the external monitor on ?
When I hook up an external monitor to the DVI output, and use both the macbook screen, and the external, the display on the external is blurry, and not very sharp. However, when I close the macbook, and run it in clamshell mode, the external becomes very clear, and crisp (like it should). I never use dual monitors, so this really isn't a problem, but want to know if its normal. 2007 Macbook Pro, 2.4, 4 gig ram. Gforce 8600M GT
The text looks a lot different from the Macbook's display. I got it to 1080p and stuff - and yes, it's showing the full 1080p. But how do I get the text to look more like the Mac's text? My Macbook display looks so much sharper. The text on the Dell looks very not anti-aliased...it isn't thick, etc.
I have my 09 mini connected to a Dell E177FP and I have the energy preferences set to turn the display off after 15 minutes. The problem is that the display never turns off. It just sits at the "check signal" screen as if it was not plugged into anything. How can I get the monitor to go into standby mode?
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
I'm thinking about replacing my 24" iMac with a 15" MacBook Pro, however I'd like to keep my 20" dell monitor and use it as the primary display for the MacBook Pro, is that possible? By primary I mean having the dock and everything else on it, with the built-in display being like an external display that I can use for extra space. Also, would the same be possible at all with my iMac?
I plan to get a 13" 2.26ghz Macbook Pro, and I have a 20" external monitor with a 1680, 1050 resolution.
First thing, I've barely used OS X, let alone with an external monitor. How well does OS X handle it? Is it pretty simple, and can I set separate backgrounds for each display?
Secondly, will the GPU handle it alright, or will it be sluggish when I hook up the external? I'll mostly be using the 20" to do Photoshop work, with occasional video editing (though I have other computers available to do rendering on.)
I typed Mac Help about "to operate the portable computer with an external monitor attached and the display closed. When I close the display of my Mac Book or MacBookPro, the external monitor such as my 50" Plasma monitor or video projector would go black. I read the Help and it said and required the USB Mouse and Keyboard to close the Macbook display and put computer sleep. My question is will the Apple blue tooth or wireless keyboard and mice will work with out using the USB? Has any one try that? I am not sure if I should buy wired or wireless to operate this.
I'm looking to have a display hookup in my room for my Macbook Pro 15". I can't decide if i should get a 26" 720p HDTV with a pc input or a large lcd desktop display with a cable input to watch tv.
What are the pros/cons? Has anyone tried/preferred either? Any recommended monitors or hdtvs?
I have got my new uMBP i7. It is gorgeous, super happy with it . Because I need to run several programs under Windows XP, I have installed Windows XP under Bootcamp. I used Winclone to migrate bootcamp partition from my old MBP to the i7.My problem is that when I linked my external monitor (20 inch ViewSonic) to uMBP using the Minidisplay-to-DIV adaptor from Apple, there is no display on my external monitor. I can set the external monitor as extension of main monitor under "Setting", but after the windows Ding/Done sound, there is nothing on my external monitor. Does anyone have experiences about fixing this problem?
I am attempting to use an external DVI monitor using the mini port port and the mini port DVI adapter sold by apple. However the screen display on the external monitor does not match the Mac book display. All I get is a color Mac opening screen with no icons.apparently there is more to getting an external monitor going then just plugging it in.
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
I have my MacBook hooked up to an external monitor of 1920 x 1080 resolution. I don't use the MacBook screen at all. Every time I turn on my MacBook it displays on the external monitor as it should, but at the MacBook's 1280 x 800 resolution, which obviously looks nasty and stretched on the big monitor. I fix this by simply putting the Mac to sleep and pressing a key on my keyboard to wake it up again; and it loads in the proper resolution. Is there a way to make it display 1920 x 1080 on boot up without having to sleep and wake every single time? Keeping my MacBook in sleep mode when not in use isn't an option.
My boss just gave me a MBP Core I7 2,66Ghz / 4GB Ram, model mid-2010 for the business. It is equipped with Nvidia GeForce GT330M as PCIe video card. If I plug an external monitor, I have, after some time between minutes or hours of work, a weird video problem, which obliged me to power off/on the MBP. Sometimes I even can see my mouse moving, but I can't do anything with it. If I do not use the external monitor I do not have problem. This type of problem appears around 3-4 times a day and make the MBP unusable, as I'm loosing the recent work each time the problem occurred.
Here is the extract of the console at the time of the crash :13/03/12 16:45:51,203com.apple.kextcache/: no supported helper partitions to update.13/03/12 16:47:29,000kernelNVDA(CopyEngine): Channel exception! exception type = 0x27 = CE0: Unknown Error13/03/12 16:47:29, ..... The problem seems related to NVidia GPU. I've reinstalled everything from scratch without success.
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
Have a brand new MBP 13" using Thunderbolt-DVI adapter with my old Dell 2405 LCD. Have an interesting scenario ... when the display goes to "sleep" there is still some type of signal coming out of the display port. The monitor will stay on and just blink "NO SIGNAL DETECTED ON INPUT 2". But the monitor actually still stays on.When I put the entire laptop to sleep them the monitor will properly power down to sleep mode.Â
I don't think its the monitor because I've used this monitor with a number of different machines and graphics cards, in every scenario when I had the display set to sleep it powered off just fine. Â
I have a MacBook Pro 13 for portability to my classes at the university and a Dell 2209WA as an external monitor. One of the few good IPS monitors I could find around for cheap.
The monitor works fine in mirror mode with the MacBook Pro, but as an external display only it does not work. It attempts to wake up and then you see power savings mode again and the screen goes black as if there was no connection. Not sure what exactly the problem here is. Drivers?
The monitor works great with a Mac Mini I have and it works great in mirror but not in external display mode(the lid of the MacBook Pro closed). Anybody know of this issue? The cable is good and the MacBook Pro is not that old(a few weeks).
