I'm planning to get a MacBook Pro and i want to know how could i get some data out of my broken iMac which had a graphics card failure which just made the whole reparation process really expansive so i decided to better get a new mac.
Is there a way to read the data from a PC?Would i have to get a hard drive enclosure?Or some sort of Fire Wire/USB -> SATA Cable?
I have an old palm that I still keep data on. Am waitiing for the iPhone5 to come out then will transfer over the data. Just bought a new iMac 10.7.4 and when I went to back up the data it said that it was no longer supported. I have my old iMac still and I can back it up there but want to sell the old one. Is there a way to transfer at least my contacts data from my palm to somewhere on my new Mac for backup until the iPhone 5 comes out?
Info:
iMac, Mac OS X (10.7.4)
I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
Info:
MacBook Pro (13-inch Mid 2012)
just eagerly downloaded the update which supposedly fixed the problem with the "remove website data" from the Safari privacy pane, the one that doesn't work, right, well, it's just the same as it ever was, cookies popping up all over the place, even after deletion. Again, I do not wish to trawl my computer looking for plists or prefs to delete, I just want the "remove all website data" button to work. Any others still experiencing this or is it just me? Has anyone found an answer to this yet?Â
Info:
MacBook
Pro, Mac OS X (10.7.2)
Our old Toshiba External Hard drive has failed ( approximately 3 years old ). It powers on and the blue light comes on, but the fans don't spin and you can't see it in the finder or on my computer ( we tried on both PC and Mac ).
Any ideas as to how I can retrieve the data... without going to a specialist and pay ���, or would that be the only option
My macbook suddenly crashed and I had to do a forced shutdown. When I tried to turn it back in, a folder with a question mark kept flashing and by computer did not start. I looked up what might have been the cause of this, and I found out it was my hard drive or the cable that connects the drive to the mac. But I brought it to my school since they have tech support and they said that my hard drive is pretty much dead, but it can still be possible to retrieve the data from. I need to hand in my Extended essay in about one week and I already had done quite a lot for my essay. how to get all my data back, or past it to a new hard drive.
Info:
MacBook Pro, Hard drive might be broken
Older G4 desktop is getting old and tricky to start up so I figure it is a good idea to back up everything quickly in case it bites the dust.
Want to back up (and update that back up regularly) all data, including my email messages and mail organisation.
I have a 13" MacBook, and I'm swapping out the factory-installed 120 GB hard drive for a 320 GB one. I have been using it with the 120 GB disk, and I want to make a copy of it on the larger disk before I swap them. I have a fairly good idea of what to do, but I don't want to risk losing data, so I want to check and see what the best way to do this would be.Here's what I was thinking: along with the new drive, I bought an external enclosure. So, I was going to put the new disk in there, connect it to the computer with the original disk, and copy a clone of the internal disk to it. I was thinking of using Disk Utility or Carbon Copy Cloner to do this (although I have never done that, so I'd appreciate it if you could walk me through making a bootable clone with either one). Then, once I essentially have two disks which are clones, I'll swap out the old disk for the new one (I know how to do the physical installation).
View 3 Replies View RelatedWhat can be done if Time Machine failed to save certain data to external hard disk, but I do have the old hard drive? I have a new IMac 10.9.2. The old IMac was hit by lightning/surge. Restored data from external LaCie disk but some information is missing. Apparently Time Machine did not save it to the external disk, or we just can't locate it. We do haves the old hard disk and will put it in a box to be able to access it.
Is partitioning the answer?
i have 10.2 install discs 1 & 2 can i use an ibook to be a slave and put the install cds in that? mainly, the guy's problem im trying to fix is that his daughter deleted the utilities folder from the iMac g3 running 10.2.8. i want to upgrade him to 10.4 of which i have the disc install DVD. what would be the easiest way to do this seeing the cd drive on the iMac G3 is busted, i have install discs 1 & 2 for 10.2 jaguar and the install dvd for 10.4 tiger? and his daughter erased the utilities folder on the iMac g3 with 10.2.8 on it. I can use his ibook with functional dvd-rom drive as a slave right?
View 1 Replies View RelatedI am running an Intel G5, 10.5 iMac and am trying to upgrade to Snow Leopard. My problem is that my iMac's screen is completely disfigured from an unfortunate accident and since then I have set my display to mirror onto an external monitor. However, when I restart my Mac to install Snow Leopard via a partitioned hard drive, my external monitor seems to have defaulted into functioning as a dual monitor, not as a mirrored display.
As a result I can't see what's happening during the installation process. What I need is a way for my Mac to use my external monitor as the primary display during the installation process, but I'm at a complete loss as to how to achieve this. I can see and move my mouse around if I drag it way off to the right, but I've tried blind-clicking and dragging from the opposite screen to no avail.
How can I reinstall the OS on my G5 iMac without the CD/DVD drive (there's a disc inside that cannot be extracted!!) I have another iMac (Intel and a MacBook Pro) I need to reinstall 'cos all sorts of trifling little details are making it awkward to use but I still need it. Would having a Timecapsule help?
View 1 Replies View RelatedI have a week 50, i7, 2TB Imac. It has a very distinct yellow "tinge", and the Bluetooth does not work properly. Every time I reboot or start, the "Bluetooth setup assistant" starts, which I have to force quit. The wireless keyboard and mouse work fine, but I can't add either of my two bluetooth headsets. They pair, but when I try to activate them, it goes to the bluetooth settings screen, where it says that bluetooth is "off", despite the on checkbox being checked and the keyboard and mouse working. I called support and they had me do a bunch of things, the last thing being reinstalling the OS. Didn't work. So now I need to call them back. I have two problems, the yellow screen and the Bluetooth. Should I ask for a replacement? I see that a lot of people have gotten a replacement just for the yellow screen problem. I have two faults.
View 2 Replies View Related**Intel Imac 24 in. 2.4GHZ Core 2 Duo (NOT G5...my bad)
I know the "Using imac as external monitor" topic has been adressed in previous posts and it apparently can't be done. But this is slightly different.
I have this Imac G5 24" that is currently out of order. (won't detect hard drives when powered on 90% of the time and when it does i am experiencing ridiculous lag and random shutdowns...not to mention crazy overheating)
I sent it to tech support and after changing the hard drive, power supply etc.. and still not seeing any improvement i just stopped sinking money in repairs and got a new imac.
So now i just have this useless imac laying around and i figured i might as well try and recycle it into a secondary monitor.. I don't mind hacking it open since i have nothing to lose. I was just wondering if it could be done and if so would it be very complicated? I would rather pay a few hundred dollars in wires and IT than buy a cheap external monitor since its already a decent quality monitor and it matches the new imac
I have an imac g3 slot loading that came with a CD in it. It sounds pretty bad when trying to eject and finally a bit came out and I could grab it. Is there a way to investigate or repair or replace?
View 2 Replies View RelatedSo I encountered the grey screen with the spinning wheel 2 days ago. I am using a MacBook Pro (Late 2011), I bought it only 2 months ago. I have tried to reset PRAM, booting the computer with; shift, command v, option, command r, command s, and re-installing Lion from Disk Utility. My last and only way out of this seems to be a reformating of the Hard Drive
View 6 Replies View RelatedHow can I do this? I have an iMac G3 @ 333Mhz with a broken CD Drive. I have a retail panther box with all of the disks. I have a MBP if that helps. Do I need to buy a new drive?
View 2 Replies View RelatedMy iMac was in the middle of burning a CD on Sunday and spat it out halfway through. Next it was spitting every disc out, including the OS disk at firmware. Anyway, Applecare confirmed the superdrive needed replaced. The machine is only just over a month old (but it is the old top end 3.06GHz model)! So, it went off for repair in perfect order, all packaged up in the original packaging. Based on the advice on others, I also took many photographs before I dropped it off at the repair place. When I picked up the machine today the back of it has been scratched in a number of places. The screen also has loads of dust/debris underneath the glass display.
View 24 Replies View RelatedI need to reformat my iMac G5, but my optical drive doesn't work. How can I restore my iMac to factory settings and then reinstall from the purchased discs, Aperature, Final Draft and Final Cut Studio 7? Can I use my Ibook unibody's drive to somehow do this? Desperate to edit footage from my trip to South Sudan for CNN and NBC, and my macbook's screen has a 3 inch black line down the middle (that's another matter entirely!)... hence using the iMac. (Which by the way, has 2GB RAM.) Also, while I'm here, is it easy the replace the optical drive myself? I've successfully done it with my MacBook, but the imac looks like not possible.
Info:
iMac
My Macbook Pro from 2007 won't boot anymore, turns out to have NVIDIA GPU problem. It ran on Snow Leopard, but I can't enter it anymore to upgrade. I'm trying to move mail to my new Imac and have a TM backup on the desktop of it. I followed this [URL]..... Mail folder and plist are now copied in the same locations, new original Mail folder is parked on desktop because I didn't dare 'fuse' the two, let alone replace it with my old mail folder.
When opening the Mail app. I get the permissions message that I should set 'read and write' permissions on the Mail folder, but it says the info Mail wants to use is in the mail folder in the Backup folder, although I provided it with a copy in its own Library. The permissions via show info were ok, but I redid them and still the error keeps popping up.Â
Questions:Â
Why won't it use the folder from its own library?
Could this be because my previous version is too old?
I can't enter my mail or mail addresses, years of data there..Â
Looking for a bit of direction. My MacMini got flooded (please don't ask!); and has pretty well died (BTW, I'm in Switzerland). The repair quote from an authorised Apple shop was for about the same as a new Mac Mini. Makes sense for me to do that...
Q1: how likely is it that my data (really only concerned about JPGs from iPhoto, and music from iTunes) will still be OK?
Q2: do I need a data recovery specialist? Any "simple" tricks to offload my data from the old HDD, onto my (not yet purchased) new Mac Mini?
The Mini Has Some Great Software On it, Could i Use Migration Assistant To Transfer The Programs To My iMac Without Losing My Data On My iMac? Or is There Any Other Way?
View 2 Replies View RelatedGot my new iMac 27" i7 2.93 for three weeks ago. Everything was kind of fine but now everytime i boot it starts to write to the disk, and since you really can hear when the machine writes to the disk, it's obvious when it does it. The disk is a WDC WD1001FALS-40Y6A0
- I turned of spotlight indexing, rebooted, 30 minutes later it was still writing like there was no tomorrow.
- Checked Console.app, just Google Chrome trowing messages (which is running slower then on my old MBP Santa Rosa 5400 rpm).
- Ran disk utilty repair permissions, still no luck.
- Used Lingon to get rid of **** at startup, still no luck.
- No disk encryption.
The bottom line: The machine runs slower, boots applications slower and functions slower then my old MBP 2.4 ghz Santa Rosa 2007 with a 5400 rpm hdd. I tried to run a blu ray mkv from the internal disk, stuttered as hell and didn't work despite VLC being the only open application. Then i ran it from an external 5400 rpm Firewire drive and it worked flawlessy. What is up with this? Shall i reinstall and empty my disk?
Is there any software for checking what applications is currently writing to the HDD?
Screenshot from my activity monitor.
I have an iMac that I connect to my Vizio using the miniDVI output on my mac. My question is, I have direct.v. is there a "hopefully" free way to capture t.v. from my direct.v./Vizio and save it on my iMac. Just to edit stuff for fun?
View 1 Replies View RelatedMy Imac did not save any configuration. What should I do?
Info:
iMac, Mac OS X (10.7.3)
Want to transfer data from iMac G5 to new iMac Intel 10.6. I have ethernet connection. Not sure the next step.
View 10 Replies View RelatedI made a fathers day movie. I would like to save so my dad can keep it. But if I try to make anew movie it will erase my dads on.
View 2 Replies View Relatedi can't save images to my desk top
Info:
iMac
the monitor's default brightness setting is far too bright for my eyes, so the first thing I did was to open the System Preferences pane and reduce the brightness setting. That worked fine until I shut the computer down. On rebooting, the brightness returned to its default highest setting. On my older iMac G5, the brightness setting always stayed put. It isn't a huge problem since adjusting the brightness setting does work, but I don't want to have to adjust it every time I reboot my computer.
I spent two hours yesterday on the phone with Apple support trying to fix the problem, even going so far as to reinstall the system software with no success. The woman on the phone finally suggested that I return the Mac for a replacement.
Has anyone else here with a 2009 iMac experienced this problem? Is it possible that it's hardware related? If so, could this be the tip of the iceberg suggesting a potentially larger problem down the road? I would have guessed it might be a software glitch. (The new iMac has thrust me, finally, into Leopard; until last week I was using Tiger on my older G5.) I bought the 3-year Apple Care with it--since the new iMacs have only been out a week, should I wait until the next Leopard update and see if that fixes the problem?
How do I save photos in an e-mail into iphoto?
View 1 Replies View Related
