IMac :: IMac 27" I7 2.93 Slower Then Old MBP - Disk Accessing Data All Day
Dec 3, 2010
Got my new iMac 27" i7 2.93 for three weeks ago. Everything was kind of fine but now everytime i boot it starts to write to the disk, and since you really can hear when the machine writes to the disk, it's obvious when it does it. The disk is a WDC WD1001FALS-40Y6A0
- I turned of spotlight indexing, rebooted, 30 minutes later it was still writing like there was no tomorrow.
- Checked Console.app, just Google Chrome trowing messages (which is running slower then on my old MBP Santa Rosa 5400 rpm).
- Ran disk utilty repair permissions, still no luck.
- Used Lingon to get rid of **** at startup, still no luck.
- No disk encryption.
The bottom line: The machine runs slower, boots applications slower and functions slower then my old MBP 2.4 ghz Santa Rosa 2007 with a 5400 rpm hdd. I tried to run a blu ray mkv from the internal disk, stuttered as hell and didn't work despite VLC being the only open application. Then i ran it from an external 5400 rpm Firewire drive and it worked flawlessy. What is up with this? Shall i reinstall and empty my disk?
Is there any software for checking what applications is currently writing to the HDD?
Screenshot from my activity monitor.
View 4 Replies
ADVERTISEMENT
Dec 31, 2010
System Spec: Late 09 21" 3.06, GeForce 9400, 4gb ramCurrently I have itunes and safari running, if i enable the visualizer my imac is noticeably slower, especially when browsing the internet.I thought it might be the fact I was running a second 1080p display from the 9400 would have caused the slow down. But the same thing occurred after i disconnected it. After repairing permissions and restarting, pmram etc.Is the 9400 causing the slowdown? I know its fairly old but itunes visualizer and safari should be quite basic tasks. Its not the end of the world i know but does the 27" imac have similar issues as i plan to upgrade my machine in 2011.
View 12 Replies
View Related
Nov 24, 2010
so everyone knows the iMac hard drive can be a little noisy, but I just want to know what exactly is being "written" to the disk while doing normal tasks like web surfing.
I often use Safari and can hear the hard drive churning and Activity Monitor will show high red spikes of written data. What is this data being written? Is it normal?
Here's a screen shot of my Activity Monitor while web surfing and watching video with my EyeTV device. Does this look like normal activity to you?
View 5 Replies
View Related
Mar 17, 2010
I just attempted to transfer my files from my old powerbook G4 15" to my iMac 20" using Target disk mode. First I tried to use a firewire cable but it didn't work, I think I was using a 400-400 instead of a 800-400. So I used the option to connect to two computers over a shared internet connection using a password. I thought It would automatically transfer my photos and other files but it just transferred these weird extensions for applications and I don't recognize any of it. To make it worse, I tried to open photoshop on my iMac and now its asking for a password! None of the photoshop series would open, it's asking for a serial number. I had photoshop installed before and the guy doesn't live in my state who installed it for me and I don't have any of the original disks. I know Dell does system restore but Macs work differently. I wish I could undo this whole mess, I need photoshop!!
I dont have the original OS disk either, ughh I should have just splurged on a portable hard drive.
View 16 Replies
View Related
Jul 11, 2010
I have a couple of questions regarding backing up my external drive. I've got a 2TB external drive with about 1.5TB of movies, Music etc. I've got another identical empty drive that I want to keep a backup of the first drive on. So my question is what is the best way of backing up this data? I thought of using disk utility(I'm running snow leopard 10.6.4 if that makes any difference) to created a mirrored RAID set. If I plug in the empty drive then create the RAID set will my first drive get wiped when the set is created? or with it leave the data on the first drive intact? Or should I just use something like crashplan to backup to the 2nd drive?
View 2 Replies
View Related
Jun 28, 2007
Just got an Intel iMac, with 1.5g ram (one 1g and a 512mb). I've been running CS2, and have been very disappointed. Previously, I was using a G4. I was expecting the program to run faster, even under Rosetta, but not only has it been slower, InDesign is acting buggy, with crashes, and corrupting files.
I'm going to get a second 1G stick of ram to see if it's a matched ram issue, but I'm interested if anyone else has had this problem.
View 4 Replies
View Related
Jul 27, 2010
correct me if I'm wrong but the 4850 has 800 pipelines and a 256 mb bus width as apposed to the 400 pipelines and 128 mb bus width in the 5750?
step backwards in terms of graphics?
View 24 Replies
View Related
May 2, 2012
My late 2011 iMac started slowing down about 3 months ago. My hard drive then got corrupt and I restored to mac osx lion anew. It sped up a bit but still slow. Last month my iMac started doing the same thing so instead of restoreing I moves all of my files to an external hard drive. Now I rerestored once again but it didn't help. A prime example of the speed decrease is the game minecraft. Half a year ago I could run a server and run on the good graphics smoothly. Now I can even look around with only minecraft. It took me 30 min to turn on. I had to do this on my iPad because I mac couldnt make it here.
Info:
iMac, Mac OS X (10.7.2), Late 2011
View 1 Replies
View Related
Aug 26, 2010
Im setting up my new 27" iMac, coming from a G5 PowerMac and am having an extremely difficult time setting up the network to see another Mac computer in the same room.
I am able to setup the File Sharing and I can see the hard disk drives that Ive allowed but on my old setup, I was able to view EVERYTHING on the networked Mac and I didn't even add them all to the File Sharing. I don't know how I did it but I can't seem to replicate it.
What is it that I'm not doing right?
View 1 Replies
View Related
Oct 20, 2010
I recently noticed a "device" in Finder called "imac 4". If I click on details, it says PC Server. If I go to the Sidebar preferences, and uncheck Bon Jour, then it disappears, so that tells me it has something to do with this. I have read a little on what this is,and it has to do with file sharing on networks, or shared printers and such. I haven't done anything new that I can think of, so I'm wondering why it just started showing up. Could someone be accessing my network? It is a secured network with an AirPort base station.
View 1 Replies
View Related
Aug 26, 2014
Since upgrading to Mavericks my Mac has been running pretty slow. I run Logic Pro 9 and Ableton 8 music programs on my computer quite often and that's where i notice significant lag. I understand those are heavy programs, but even when Safari is open and I try to open Finder there is lag time before the window actually opens. When I restart my computer, it runs a little better, but as soon as I begin to open other programs, the lag begins and will continue even after I close them.
I upgraded from Snow Leopard and never had any issues- it ran extremely smooth under the most stressful conditions with all the current memory and hard drive space, cpu, etc. I
EtreCheck version: 1.9.15 (52)Report generated August 26, 2014 at 12:37:45 PM CDT Hardware Information: ? iMac (21.5-inch, Late 2009) (Verified) iMac - model: iMac10,1 1 3.06 GHz Intel Core 2 Duo CPU: 2 cores 4 GB RAM Video Information: ? NVIDIA GeForce 9400 - VRAM: 256 MB iMac 1920 x
[code]....
Info:
iMac (21.5-inch Late 2009), OS X Mavericks (10.9.4)
View 4 Replies
View Related
Sep 11, 2008
The Mini Has Some Great Software On it, Could i Use Migration Assistant To Transfer The Programs To My iMac Without Losing My Data On My iMac? Or is There Any Other Way?
View 2 Replies
View Related
Aug 19, 2010
after months of going back and forth I finally went with an entry level iMac which is perfect in every way. I think... I don't remember the start up time taking almost a minute to cycle from the blank gray screen to gray screen with the Apple on it. Tuesday and yesterday it started up much faster (at least 30 seconds). ere's my some of the hard drive info:
WDC WD5000AAKS-40V6A0:
Capacity:500.11 GB (500,107,862,016 bytes)
Model:WDC WD5000AAKS-40V6A0
Revision:05.01D06
Serial Number: WD-WCAWF5070764
Native Command Queuing:Yes
Queue Depth:32
Removable Media:No
Detachable Drive:No
BSD Name:disk0
Rotational Rate:7200
Medium Type:Rotational
Partition Map Type:GPT (GUID Partition Table)
S.M.A.R.T. status:Verified
The only thing I've done since Tuesday is add two songs in iTunes to test the cd-rom drive. I just ran the extended Apple Hardware Test and everything is fine. Given that my 20" refurb died within 3 months and I returned 2 iMacs prior that one, I'm a little nervous. Is this normal for a Western Digital hard drive to take nearly a minute start up from gray screen to grey screen with the apple?
View 6 Replies
View Related
May 2, 2009
Basically need to know if there is a method of accessing the 360's HDD from an iMac (3.06GHz model) without using XSATA or xsata cables as, you know, there isn't a way to connect xsata cables to the iMac, as far as I know anyway.
View 4 Replies
View Related
Sep 13, 2010
I partitioned my HD and ran a boot from that disk. When I go and run a geekbench score I am getting 2400+ range as opposed to my 5800+ range I get on my normal boot up section?
View 4 Replies
View Related
Jun 19, 2010
After owning my Imac for about 12 months or more now I've noticed lately that it has become much much slower. I expected it to slow down just like all computers once you have used up a fair bit of memory space but I haven't used up much at all. I've tried to avoid using up too much space on my Mac by using an external storage drive but I'm wondering if that has the opposite effect? I've got the usual apps that help the Mac to run efficiently and I've followed various threads that show how to optimize the mac so I'm assuming there isn't all that much tweaking left to do... could be wrong though. A long time ago (i'm not sure what got into me) but I downloaded the apple developer software, I don't intend on using it but i don't what the correct names of the apps are and I don't want to uninstall the wrong stuff. I have tested the speed of my Mac with and without the external memory drive but didn't find much difference, but perhaps my tests weren't entirely accurate.
View 6 Replies
View Related
Jul 25, 2008
I have an iMac G5 with a broken graphics card. As a result it won't get past the start up screen when booting. I have a new mac on the way, but I'm wondering what would be the easiest/cheapest way to access my files on the old iMac.
I've read about taking the HD out and using a SATA/USB connector to attach it to the new computer as an external HD. Is that my best option, or is there a way to boot the iMac and just access the HD via the iMac's firewire/usb ports.
I've run the CD diagnostic tests and it says everything is fine, except the graphics card.
View 2 Replies
View Related
May 18, 2012
I tried to send mail with large attachment and suddenly my imac became slower. It is taking more time to open applications or files than before.
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Mar 5, 2010
Want to transfer data from iMac G5 to new iMac Intel 10.6. I have ethernet connection. Not sure the next step.
View 10 Replies
View Related
Mar 9, 2010
I been having disk error with the 2TB disk in my new 27" imac The errors looks like this:Verifying volume ?Macintosh HD?Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Missing thread record (id = 1336149)Incorrect number of thread recordsChecking multi-linked files.Checking catalog hierarchy.Invalid volume directory count(It should be 197788 instead of 197789)Checking extended attributes file.Checking volume bitmap.Checking volume information.The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
View 3 Replies
View Related
Feb 5, 2008
I could use some help getting data off of my old Mac II ci System 7.1 that I stored some 12 - 13 years ago, I think. The reason I stored it was the Super Drive (floppy) was erratic - worked sometimes and not others. I had the drive replaced, but the problem persisted - someone told me it was probably the floppy drive controller, but I never dug that far into it at the time. I suspect the box has Applenet, but I never used it or any other networking scheme with it, except dial-up modem.
I started reading here about problems associated with accessing SCSI drives, which I assume mine is - it was the big 100 MB! How do I access the data from it? Or, give me a starting link for researching it, please. After I do that, how do I read it or convert it into something I can use in Mac OS X? I had Great Works word processing, spreadsheets, and drawing programs, and some AppleWorks data, along with FileMaker Pro 2.0 (or 2.5, but not 3.0).
View 4 Replies
View Related
Jul 1, 2014
Every time I try to restart my computer on my Hard Drive I get this message "Startup disk could not gather enough information on the selected disk". As of right now I am running my whole computer off of a 16GB flash drive that is quickly running out of memory. How do I fix my Hard Drive without losing all 150GB worth of data. I am running off of OS X 10.6.8 and have another iMac that is working fine.
View 2 Replies
View Related
May 18, 2012
software is upto date yet my macbook gets slower and slower by the day
Info:
MacBook Pro
View 2 Replies
View Related
Feb 12, 2009
When I restart the g4/800mhz quicksilver while holding "t" it issues the sound of happiness and hums for a bit then clicks off. There is no regular error message on the imac but I did get "there is no osx disc on your old computer, etc". Is there any way to do this without having to be smart enough to put every file in the right place on the imac? These machines are supposed to be smarter than I am right? BTW every drive on the g4 has os 10.4 installed on it. I'm looking for that clean transition from one computer to the next. Also, is there some reason I wouldn't be able to install os 10.5 that came with the imac on a macbook/2.0?
View 24 Replies
View Related
Dec 14, 2009
So I have a dvd I would like to burn onto another disc but I cant seem to do it. Do I copy and paste files from the original onto the desktop, then burn the files from desktop onto a blank dvd?
View 2 Replies
View Related
May 1, 2010
I am hoping someone out there would be willing to assist me by getting a dump of their system SMC keys so I can do a comparison against my system. Ideally it needs to be done on a 2008 Alu 20in iMac with SMC version 1.29f1
You need to have SMCFanControl on your system and know where the smcFanControl.app is located.
Open Terminal
cd to the directory that has the smcFanControl.app
cd smcFanControl.app/Contents/Resources
type ./smc -l
select and copy the output and save/post
exit terminal
View 1 Replies
View Related
May 5, 2010
Whats the fastest and easiest way to transfer all the data from the imac onto the MBP?
The MBP will have a clean install of snow leopard & some other applications installed such as parallels and office..
View 1 Replies
View Related
Apr 3, 2012
I have purchased an imac to replace my mac pro. How do send al my data from the mac pro to the imac? I can't tkae both machines in to have apple perform the service. I will sell the mac pro and will need to completely wipe it clean so my data is forever gone from the machine.
Info:
Mac OS X (10.6.8)
View 5 Replies
View Related
Apr 25, 2012
How do I transfer my data from iMacG4 onto a new iMac?
Info:
iMac, MacOS X (10.5)
View 1 Replies
View Related
Apr 26, 2007
I can not find documentation ANYWHERE that explains - specifically - how to configure my Airport Extreme to access the attached USB hard drive from the internet. Has anyone successfully done this? I would like to type in an address and have it go directly to the drive. I think I've done everything in the airport utility that I'm supposed to do, and I've set up a dynamic dns account and opened up port 80.
View 24 Replies
View Related
