OS X V10.7 Lion :: Can't Restore Partitioning Using Disk Utility
Apr 8, 2012
I'm trying to restore the partitioning of my late 2011 Air drive, after messing it up while trying to dual boot OS X and Linux. The goal is to get rid of the superfluous partitions and resize the OS X one so I can use the whole drive again. Data loss is not an issue. According to Disk Utility the partitioning looks like this:Â
EFI
Macintosh HD
Recovery HD
06
[code]....
Info:
MacBook Air, Mac OS X (10.7.3)
View 5 Replies
ADVERTISEMENT
Jun 12, 2009
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies
View Related
May 11, 2008
I currently have Leopard installed on my MBP. A while back I installed Windows XP Pro SP2 via bootcamp. I have a 130GB Leopard partition, and a 18GB Windows partition. Now I want to add another partition, splitting the Leopard partition into two. I want to add a 20GB partition. I have cleaned my computer, and there is plenty of free space to do this. Currently 70GB free. So I go into disk utility, and try to partition. Doesnt work. Says that it failed to verify, repair disk. Then i boot from Tiger install disk, open disk utility, and verify disk. Says there are errors so i repair disk. Says that it repair worked. Verified again just to be sure, no problems. Go back into leopard and disk utility to try and partition, still does not work, I get the same error.
View 19 Replies
View Related
Jun 25, 2009
Here's my setup:
One, dual bay enclosure (1.5TB x2):
OWC Mercury Elite - AL Pro Dual Bay Enclosure
https://eshop.macsales.com/item/Othe...ng/MEFW934AL2/
and one, two pack of 1.5TB Seagate HD
http://accessories.us.dell.com/sna/p...550055-683153-
Total: paid $310 including shipping for the 3.0TB external setup.
I'm going to use FW400(since my MB pro has no 800 port) and partition this into two 1.5TB partitions. one for storage, and one for time machine backup. My question is if I choose 2 partitions in disk utility, will it automatically know to use one of the 1.5TB Seagate HD for one partition and the other 1.5TB seagate for the 2nd partition? Or will it use half of one and half the other? I would like one partition to be one seagate 1.5TB HD, and the 2nd partition to be the other, that way if one fails I have a backup (using Time Machine with one partition to backup the other 1.5TB drive).
View 3 Replies
View Related
Mar 14, 2009
I use a G4 400MHz and need a defragmenting / partitioning utility, what are my options? Drive Genius requires more horsepower.
View 3 Replies
View Related
Jun 5, 2014
I was in the recovery hd, and i was partitioning my main drive into to partitions. while it was pertitioning, i accidently quit the disk utility. i saw that now the hd was in one partition and was nearly full (it was half filled before). i did a disk repair and it came back to half filled. now that i retry to partition it it gives me error Â
" Partition failed with the error:  Couldn’t modify partition map because file system verification failed."Â
Is there anything I can do except from reinstalling everything?
Info:
MacBook Pro, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Apr 4, 2012
I am trying to make a redundant backup image of my harddrive using something OTHER than Time Machine. I booted to recovery because you image from a disk you are booted from. The restore took 2 hours, and indicated the entire time in disk utility that it was restoring "Mac HD" to a similarly sized partition on my external hard drive. When it was done, the external had a copy of my recovery drive on it. That's crazy talk.
Info:
Macbook Pro, Mac OS X (10.7.2), iMac 24" used at work
View 3 Replies
View Related
Dec 19, 2010
I have a hard drive with about 250 gb of film and music on fbut it's formatted as HFS+ which windows cant read! I need to partition the drive to make windows be able to read at least a portion of it. But If I run disk utility and create a partition will it erase the info I already have on there? I don't have this data else where so I hope it wont!
View 6 Replies
View Related
Jan 4, 2011
I have a sparse disk image that is 10+gb, however the files on it amount to no more than 4.4gb.
When I try to restore to another sparse image that is 4.5gb or even 4.8gb, it says to me that there is not enough free space.
The files are only 4.4gb! How the hell do I set Disk Utility straight? Or is there another app that could accomplish the same thing?
Why god WHY has Disk Utility been broken since Leopard and let to remain broken??!!
View 1 Replies
View Related
Aug 16, 2010
I am now using a mid 2009 imac (i5 27") and will be getting the updated mid 2010 imac (15 27").
My question is; can I use a disk image of the 2009 imac and put it on the 2010 model to minimise the switching effort? I know some programmes will have to be reinstalled and I will need to unregister some things like Quark and iTunes.
Is it true that you have to make the disk image while the system has started up with the OS X DVD?
CCC warns that the image it makes will not be bootable. Can Disk utility restore the new iMac from it?
View 9 Replies
View Related
Mar 4, 2010
I'm trying to use Disk Utility to restore a .dmg backup file stored on an external usb hard drive. The image is a read-only dmg and is 75gb. When I try to restore the 75gb image to a 128gb SSD formatted in OS Extended (Journaled), Disk Utility says that there is not enough space on disk to restore.
View 1 Replies
View Related
Apr 15, 2010
just got a cheap ass emac off ebay and it came with 10.2.4. I am trying to restore a DMG file to a partition. In Leopard it can be done using the Disk Utility by using the restore tab and selecting the image. This option is not available in the Jaguar disk utility but I think the feature is still in the OS only command line, is this true? and if so where would I be able to get some help on this matter.
View 1 Replies
View Related
Apr 2, 2012
My Macbook crashed so I tried everything to restart it. what finally worked is opening it from the install disk. I performed a "repair disk", and after saying "invalid node structure" and "invalid record count", it says it cannot repair the disk. I don't know what step to take next. How do I see if time machine has backed my files up? Do I need to erase the HD and reinstall?
Info:
MacBook
View 1 Replies
View Related
Sep 3, 2014
I just used Disk Utility to make a backup of a MBA (65GB) onto a 500GB external drive (Restore from internal HDD to external HDD). I then reformatted the internal hard disk and proceeded to restore my backup (external HDD to internal HDD). I soon received an error message stating "Restore Failure - not enough space". I guess that means Disk Utility backups are a one-way operation, since you can't restore from a larger drive to a smaller one? Is there something I am overlooking? I ended up using Carbon Copy Cloner to do the job, but I'm wondering how (if?) restoring from a larger backup drive is possible using Disk Utility?
View 1 Replies
View Related
Nov 17, 2010
Steps to reproduceOpen Disk Utility Drag an ISO image into the left sidebar Insert an USB Stick with enough space to contain the image Go to any restore tab in Disk Utility Drag the ISO file to the source Drag the Volume from the USB drive to the destination Check erase destination Hit restore
Results for me are (in any number of varieties to do this) either "Invalid argument" or in the log "Could not validate source - error 254".
View 1 Replies
View Related
Jun 23, 2009
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
View 12 Replies
View Related
Apr 13, 2012
I need an AppleScript to restore a bunch of partitions from a master drive to a stack of external target drives. I don't mind partitioning them 1st, if necessary.The master drive has 16 partitions, all equally sized, and I'd like a script to run that will have Disk Utility to just go down the list restoring each partition to the matching 16 partitions on one of the target drives.
Info:
Mac OS X (10.7.3)
View 14 Replies
View Related
Apr 1, 2012
how to properly format and partition an ext drive using Disk Utility. I will be making a clone using CCC.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!Â
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.Â
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 6, 2012
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies
View Related
Apr 25, 2012
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset. Â
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment. Â
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!Â
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
View 5 Replies
View Related
Mar 19, 2012
I'm running Mac OS X (10.7.3). I need to make an image of my boot disk, before I install a larger HDD in my MBP. My boot disk is greyed out in DU:I had already dragged my com.apple.DiskUtility.plist file to a separate disk (I actually found two - both dragged away), and that disk was selected in DU All I want is to create an image to restore to the larger HDD. I have a 4TB Raid drive on which I have created previous images; now I can't.Â
Info:
MacBook Pro, Mac OS X (10.7.3), iPhone4S, iOS 5.1; iPad2, iOS 5.1.
View 3 Replies
View Related
Jun 26, 2012
I just got my computer yesterday and when running the "repair disk" function, I already get an error! Since I used migration assistant to move everything off my old mac to my new mac, I'm not interested in reinstalling the whole OS and transffering all my files again. This is a new computer, and shouldn't have this problem this early. I also get the same result when starting up in the recovery partition. How do I resolve this?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
View 2 Replies
View Related
Jan 6, 2008
I have always copied my hard disks with the Disk Utility "Restore" function. Is this the best way to copy discs?
View 7 Replies
View Related
Jun 11, 2012
Last year I bought a new 17" MacBook Pro, that came with Snow Leopard 10.6. I think it was just before I got my new MBP that I got an invitation to try the Developer Preview of 10.7 and offer feed back. Well, after using my new MBP for a couple days and backing up everything with Time Machine to an external hard drive I downloaded and installed 10.7 Preview.Â
After a few hours of using it I was not happy with it at all (long story short, several things indicated to me this was a pretty early version of 10.7 and I didn't want to use it on this machine). So I erased the drive and restored everything from my Time Machine backup. That must have been around a year ago or so.Â
Now I want to add a 100 GB partition to this hard drive so I can install Lion on the new partition to try it again. But my version of Disk Utility (11.5.2 (298.4)) won't let me add a partition. It looks like it is going to add a partition but then I get "New partition requires a newer version of OS X".Â
I think when I installed the Preview of Lion it did something to my drive/partion for some of the new features it supports. But, if I can get a copy of the Disk Utility that comes with 10.7 would that run under 10.6? And let me add a partition?Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 13 Replies
View Related
Apr 9, 2012
I was going to run Disk Permissions and when I opened it up, there is a decrypted file.dmg showing. Here is it's path:/var/folders/2d/vmlqi1 d0gzcs7mxi nnl 1w0000gn/T /decryptedFile.dmg...I opened it and saw that it has something to do with installing Adobe Flash Player. I remember downloading and installing it a couple of days ago. I've adonw this previously, but never had the disk image show up in Disk Utility before. How can I get rid of it? It seems to be in a folder calledl "T" that I can't find anywhere.
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
View 6 Replies
View Related
Mar 21, 2012
after i erased the partition in the list in left i couldn't delete a partition in disk utility "File system resize support required, such as HFSÂ with Journaling enabled" error, i think it came with REfit program!?
Info:
iMac, Mac OS X (10.7.3), intel core i5
View 1 Replies
View Related
Jun 9, 2012
How much time should I allow for the full process to duplicate one disk?
Info:
Mac OS X (10.7.4), Panasonic Double Feature DVD/VHS player, Canon ZR45 DV; Fuji sti
View 4 Replies
View Related
Jul 1, 2012
I installed Ubuntu on my Macbook but it didn't really work for me so I deleted it. I used Disk Utility to delete the Ubuntu partition, but when I want to delete a Linux-swap partition I made while installing Ubuntu nothing happens. I press the minus button and it will delete it. But after deleting it just stays there, and I can't change the partition in any way. How can I delete the partition?
Info:MacBookPro, Mac OS X (10.7.4)
View 1 Replies
View Related
Mar 25, 2012
I don't know if this is a problem or not, but recently on my 15" MBP using Mac OS X Lion 10.7.3, clicking on a .dmg file automatically opens Disk Utility. Which is weird, since before this situation happens, opening a .dmg file will not automatically open Disk Utility. I have a screen shot below opening the .dmg file for Firefox installer for Mac OS X. Shouldn't it actually be like this when clicking on a .dmg file? Is there a problem with my MBP or my Mac OS X Lion?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
