After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
The printer is about 4yrs old.
Info:
Mac Pro, Mac OS X (10.7.4)
I have an issue making the scan to network function to work between HP LaserJet m1120n multifunction printer and Snow Leopard.Â
Printing is working fine and it was added via IP.Â
I checked the HP site for the instruction, but it does not work.Â
[URL]
anyone using the same printer/scanner that could give me tips to get this working?
Before the 10.7.4 update, my HP Color LaserJet CM2320nf multi fucntion printer worked just fine with the built in OS X print drivers. I had the printer shared on the network via my iMac (2011) over USB and other devices could print to it via Bonjour.Â
As soon as the 10.7.4 update hit, printing has been an issue. Whenever a print job is sent to the printer over the network the printer displays a 'Please Insert Paper' warning that has to be cleared on the device itself before the print will continue, even though the printer is full of paper... This does not happen when printing from the iMac itself, only when using the iMac to share the printer.Â
10.7.4 seems to have been a really buggy update as it has caused problems with Wifi becoming unusable until the iMac is rebooted.Â
Info:
iMac, Mac OS X (10.7.4)
I just added a Time Capsule to my network and my printer was working fine this morning. Now Lion says it is not connected and when I attempt to download the software from Apple it says it's not available at this time.
View 1 Replies View RelatedDoes the printer HP laserjet 100 color MFP M175nw work with MAC OS x 10,7?
Info:
HP printer laserjet 100 color MFP M, Mac OS X (10.7.3)
How can I add HP Laserjet Printer in my Mac which was added in other Network PC which is window Based?
Info:
iMac, Mac OS X (10.7.3)
I have a 13" MacBook 2.4ghz Aluminium Unibody and the trackpad isn't functioning properly.
I can't highlight text, and the click is tempremental, the right click also doesn't work (yes, I've been into Trackpad System Pref. and it's fine in there)
Since upgrading to SL I have had a lot of mouse problems. At first my logitech mx had a loss of functionality with most of the "extra" buttons. That was fixed in a later update, but now the mouse does move pause move thing. I uninstalled the driver and that didn't fix it. I tried going back to the mighty mouse, that had the problem. I tried the demo to steermouse with no luck either. My less than a year old mac pro is basically too frustrating to use.
View 4 Replies View RelatedI have a 2010 MacBook Pro 15" and randomly, just opened the screen to wake it from sleep, and about 5 minuets after being on the computer the track pad started becoming more and more unresponsive. To explain on unresponsive; at first the two finger scroll to scroll the page up was not working, then the pointer would not "follow" movement from my finger very well, and finally anytime I touched the track pad (such as just laying a finger down and not moving the finger across the track pad) It would do almost any gesture and was completly unresponsive of movement. I restarted the laptop multiple times, complete shut down wait about 10 min then start back up, and the track pad would be functional for a couple of minutes before doing above listed again. So I cleaned the track pad with a napkin while pressing down which seemed to make it work again and so far has not acted up again.
Info:
MacBook Pro, Mac OS X (10.7.3)
I originally posted on needing a reliable way to extend an open network so my Macbook's waning Wifi would still get some kind of service. Recently, however, my Macbook will not maintain a reliable connection for more than 5 minutes when sitting 2 or 3 feet from the base station, so buying a wireless repeater is obviously not my only concern here.
I would normally plug in the Ethernet directly from the modem, but my Ethernet jack will not respond. No connection whatsoever. I've read in other places that this is a logic board problem, which always means expensive or impossible. Is there another option?
I would send the thing in, but my warranty may have been used up replacing the hard drive when it fried.
I'm getting to the end of my rope. Is there a semi-reliable fix here? I have owned Macs all my life and have NEVER had this many problems.....
P.S. the reason I am looking for a way to maintain a reliable connection is not only for convenience. I'm working as a data entry station for a company and I need to stay connected to their network for more than a few minutes.
I bought a Western Digital MyBook 1TB external hard drive a while ago and it was working fine with my Powerbook G4 running Tiger. But when I wanted to have it connected to my Intel Mac Mini running Leopard it always has a few problems.
1. It randomly disconnects and the message for external hd not ejected properly.
2. When I try to copy a large file to it like a 500MB file it goes so slow and when it looks like it will finish I get the error code -36
3. After all the problems 1 and 2 it won't eject and when I try to unmount it from disk utility it says it can not be unmounted.
I have tried to reformat the drive for mac with the extended journaled and partitioning and erasing with boot disk procedures. Still nothing seems to work.
I don't know if this matters but I bought it at a Walmart and it wasn't mac formatted. Would I have to specifically buy a mac formatted external hd in order for it to work in leopard? Or can I some how format this to work properly on my computer. I also have an Iomega 120GB drive that I bought a few years ago from [URL] and it works flawlessly on both my PB and MM.
I just have a hard time believing that only certain hds will work for an intel mac running leopard. I thought all hds were the same and could be formatted to run on any system.
My MacBook's sleep light does not function unless I place a death-grip on the top case right above the light itself. What should I do to repair this light properly? Any articles I should know about?
View 2 Replies View RelatedI have the aluminum iMac from around 2007 and the WiFi card seems to not be functioning correctly. It seems to time out often and is non-responsive many times. When it is working, it only gets about 1/4 the speed of what my macbook is getting.
View 1 Replies View RelatedI've found out the hard way that Snow Leopard does not support the same printers as Leopard did and now I'm stuck. I spent the better part of the day researching how to get my HP LaserJet 4m Plus to work with the new OS and got nowhere. Can anyone tell me what I can do to get the printer to work with the new OS? The printer may be old but it functions flawlessly and only has about 50,000 impressions made, so it still has lots of life. I have it hooked up via ethernet and the cable is run under the floor to the other side of the office so adapting a serial/USB would not be doable or practical. I don't have the money to blow on a new printer so I would really like to make this work somehow. Any help would be much appreciated.
View 2 Replies View Relatedi am having problem ever since i have installed snowleaopard with my printer ... i have an HP laserjet P1007.. i have already downloaded the updated version of printer software from the apple website...
whenever i try to print it shows ... printer offline.. what do i do...
Just purchased a iMac and I need a printer driver for HP Laserjet 1600
Info:
iMac
I can get this printer at a really good deal but it seems it isn't officially Mac compatible. Has anyone been able to make it work with another driver? In particular, I'm planning on connecting it to a Windows XP Dell PC and then be able to print it on the network.
View 9 Replies View RelatedSince upgrading to Mac OS X Snow Leopard my computer does not recognize my printer (HP Color LaserJet 2600n) nor will it print. What can I do? I can't afford another printer already.
View 2 Replies View RelatedI have to set up a macbook pro to work with a postscript printer for a user that has to take it off site to a show.Problem is I've no idea how to do it!!!the os version is 10.4.8 and its a dual core intel. I'm trying to connect them with a crossover cable but they just dont see eachother. Whats standard practice for connecting a mac to a printer direct?
View 6 Replies View RelatedHave installed HP 3500 printer driver on iMac, but can't get iMac to recognize that the printer exists so I can select it as my default printer
View 4 Replies View RelatedHave installed HP 3500 printer driver on iMac, but can't get iMac to recognize that the printer exists so I can select it as my default printer
View 6 Replies View RelatedI'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedI have a Canon LBP6000 laser printer. I downloaded the Yosemite driver from Canon after updating to Yosemite, and the printer worked up until a few days ago. Now, I can't print. The printer status monitor says "printing" with a status bar, but nothing happens.
I have tried remedies such as deleting all printer drivers, deleting the printer, resetting the printer system, restarting the computer, reinstalling the printer, resetting PRAM, updating to 10.10.1. Nothing has worked so far. It was working fine a few days ago!Â
I'm on a 2008 MacBook OS X 10.10.1.
Info:
Intel Core 2 Duo 2GHZ, Mac OS X (10.6.2), 2 GB RAM, 160 GB HDD, Superdrive, GeForce 9400 256MB VRAM
I have a problem on my 2011 Macbook Pro with OS X Lion on it. One of the problems is that since I have updated to the latest software updates as Apple recommends, I have noticed that copy and paste no longer functions. I used the keyboard shortcut of command + c to copy but no longer does OS X paste now with the use of command + v. I tried also to the the trackpad in highlighting, double clicking and select copy and then paste it still doesn't work and is so frustrating. Don't know what to do now.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works
Info:
Mac OS X (10.5.8)
I upgraded to Lion and although I can still use my Epson Photo R380 as a paper printer, the Epson Print CD is not functioning (It's says for Power PCs). It seems Epson has not updated that software yet, if ever. I need to print on my CDs with the Epson printer. I have tried the Magic Mouse software. Does not work either...
View 2 Replies View RelatedCan I update to Lion OS and still use my HP Laserjet 3055. I have manage to use Snow Leopard and Gutenburg drivers so far.
Info:iMac, Mac OS X (10.6.8)
How do I get drivers for HP laserjet 1020 for MAC?
Info:
MacBook Pro, Mac OS X (10.7)
I am using an HP Color Laserjet 3505n. Will snow leopard work with this printer?
View 2 Replies View RelatedI just upgraded to Lion and pdfs won't print. It doesn't appear to be the printer driver, because the printer works with others apps. It's an HP Laserjet 1300. Yes, it's old, but still works, well, sometimes. just not with pdfs.
Info:
iMac, iMac, OS 10.7.3
