I upgraded to Lion and although I can still use my Epson Photo R380 as a paper printer, the Epson Print CD is not functioning (It's says for Power PCs). It seems Epson has not updated that software yet, if ever. I need to print on my CDs with the Epson printer. I have tried the Magic Mouse software. Does not work either...
View 2 Replies
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works
Info:
Mac OS X (10.5.8)
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.Â
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
I purchased an Epson Stylus NX530 printer with wireless capability. I have a MacBook Pro running OSX v10.7. My printer is installed and works as expected when connected via USB cord but printer shows up offline when USB is disconnected. I connected my printer to my wireless network through my router (entering name of connection and passcode) and enabled the sharing capabiliy in System Preferences. So my setup is that I connected my MacBook to my router and my printer to the router. Is there anything else I am missing? Would connecting both the computer and printer to the wireless router be all I shoud need to do to be able to print wirelessly? Is my wirelss router considered my "network?" If my printer has a wireless internet connection, should I be able to "view" it anywhere on my MacBook other than printer settings when it is not connected via USB (I had to initially connect my computer via USB to the printer during setup).Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I reattached my Epson Perfection 1650 Photo scanner to my Mac G4 (Sawtooth) desktop today after updating the drivers and all to OS 10.4, which is what is on my computer. (The updated drivers also work for 10.5, which is on my laptop, but that doesn't matter here.) When I hit the Smart Panel icon on the desktop, the computer went to Classic mode, for some reason, even though the updated software is for OS X. I was able to get a Twain window, but when I clicked on any of the options for scanning, I get a message saying that the scanner is not recognized (something about a bus). I looked at all the available FAQs at the Epson Web site, but they are not helpful or relevant. For example, one told me to turn off Scan Monitor in Extensions, but of course, there is no Extensions Folder in OS X. One other FAQ suggested reinstalling the software that came with the scanner, but that was way back when I used OS 9.2.2, so how could I then bring it up to 10.4?
Most of the other FAQs were for people with Windows, so of course, those didn't help at all. The Ready light is on; all the cables are plugged in properly. I'm ready, willing, and able. I can't get Epson support, because the scanner is out of warranty, and the Epson online helpers (private) want a good deal of money to provide an answer. Granted, I don't have to pay them unless I am not satisfied with the answer, but I'd rather not have to sell the farm, when I could get a new scanner for only about twice what they are asking to give me an answer. OR (breathlessly hoping) if I can get some ideas here. I have a lot of pages to copy and send to someone, and now I'll have to copy them manually at the local store or across town, at my mother's, and then send them through the mail. It all seemed so straightforward and simple: scan and send to the eager recipient.
After the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
Info:Mac mini, Mac OS X (10.7.4)
Epson 835 is only printing in B&W since I updated to yosemite. I recently did the update as well.Â
Info:
MacBook Air, OS X Yosemite (10.10.1), can't print in color
I can't print to my network computer after 10.6.3. I can however print using Parallels, but I can't print from say preview or any other OSX based software.
The printer is an HP 4200 Laser jet that I access through an ethernet on my work network. I'm the only Mac in the office and am getting ridiculed for not being able to print from OSX.I tried downloading the HP drivers and re installing them but no luck...
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I have an Epson Artisan 800 printer but I can not get my MacBook Pro to print to it with Bluetooth. I get the following error: [URL]
View 8 Replies View RelatedI am trying to find a print server that works with the epson sx200 all in printerThe netgear ps121v2 looks OK however netgear do not list the printer as being supported same is for the d-link server.Epson only recommend there own server at �140 mmmm !!!!As any body tried the netgear or d-link with this printerPS I only have one printer which I want to share with my imac and macbook pro via a netgear wireless router
View 8 Replies View RelatedI just got the Epson workforce 615 and after hours of trying to connect this printer to my airport I give up....
Does anyone have step by step instructions on how to do this?It just does not want to connect to my airport network no matter what I do. I have downloaded all the drivers/software off the epson site to no avail.
I've been at this all nite and I am fed up. Can someone please tell me how I can print a panoramic print on roll paper using CS2 on a MAC (so please now windows advice) using an epson pro 4000? I constantly get the message that the wrong paper source is selected. Roll paper is fed into the printer, I select A2 roll paper (any of the A2 roll paper options), or I try a custom paper size (42x120 cm) on page setup. For paper I select velvet fine art paper (I don't really know what kind of paper it is to be honest), because that will select the rear feed. Unless I am mistaken (quite possible) the rear feed is used by roll paper.This does not work. I tried setting to A2, but then I get only an A2 size part of my print, and still it won't print anyway with the same annoying message. I don't have these problems with my R1800. With the R1800 I just select roll paper and everything automatically prints perfect, but not the pro 4000, can someone please explain to me what settings I have to use in page setup of CS2 and what settings I have to use in the printer driver of the pro 4000 printer ?
View 1 Replies View RelatedI am on OS 10.3.9. My Epson Stylus CX4600 will not print a Word document from this computer. It will prints a document from my older laptop, which has OS 9. And it will make copies when it is plugged into the OS 10.3.9. It will even print a test pattern when the utilities function is open. But it will not print an image or a Word doc or an Appleworks doc that is stored on the OS 10.3.9.
View 1 Replies View RelatedI have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears.  have ried down loading also disinstalled printer and reinstalled. Â
View 3 Replies View RelatedI am trying to print in 'draft mode' with my Epson xp 215 and I can't find this option under 'Media Quality'.
Does the printer misses this option or is it something with the apple software.
For the rest it works really fine.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I can no longer print from my maac to my epson. By either USB connection or wifi. It just won't connect and all I did was move house.
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
Well, after sitting on the snow leopard fence for a while, I decided to install it this weekend. I now am unable to print to my Epson Artison 800 printer. Apparently I need a Driver for it, but the Epson site is a bit confusing when trying to select exactly what I need to download.
View 3 Replies View Relatedi have a time capsule and i conect a epson nx100 to usb port to print wireless, the printer work perfec when i use it via my usb port (i have a macbook air), but i cant prinr via time capsule, i dont have any error mesagge, when i open the control panel of the printer it says that the printer is ok, all the jobs said are completed.
View 1 Replies View RelatedAfter installing OS 10.7.3 my printer Epson Stylus DX8450 give no connection
Info:
iMac, Mac OS X (10.7.3), Printer Epson Stylus DX8450
Has anyone been able to print to CD's on Epson r320 when I try to print to the CD tray, I get an error message saying the CD tray is open and the job is automatically stopped. I found the new printer drivers for Intel machines on Epson's site and installed them. and even up dated the drivers by apple.com site . but it just keeps giving the same error and in the choose media type box , it wouldnt allow my to choose dvd/cd.
View 4 Replies View RelatedI have documents that were created using colors for the text that I find difficult to read. They also print in those colors.Â
I have followedEpson's instructions to set the NX400 to print black ink only. The printer still prints in color. Possibly, Epson's drivers don't work, Or possiby, something in Lion OS is overriding the drivers.Â
Is there some setting in Lion OS that overrides the printer drivers? Is it not possible to print black ink only?Â
Info:
iMac, Mac OS X (10.6.8)
I have an Epson SX515w printer and can't find any software on Epson that lets me set non standard print sizes. From my PC Laptop I can print all Avery sizes as well as any size I want. I want to print images to fit into small square frames.
Info:
iMac
My epson workforce 845 printer stopped printing. When I go to print it says printer in use. I have uninstalled and reinstalled the drivers. I still have error.Â
View 1 Replies View RelatedI have MacBook OsX 10.5.6. Had a direct printer connection but recently decided to hook up my Epson R1800 stylus photo printer through TC. I removed the old default printer and added it through System Preferences-> Print and Fax. It is recognized as a Time Capsule Printer, bonjour kind.
But when I press print i get for 2 seconds window saying that page is printing but printer queue is empty and nothing happens. It feels almost as if printer is not hooked up. I can not locate this printer on Epson Utility (separate software) either. Does anyone have or had in the past similar problem?
Epson 4800 print perfectly on direct USB connection to MacBook Pro with the 9.17 Epson driver, but when connected to USB port on the Time Capsule, there is red sign and notice that the printer is unconnected. Both the port of the Time Capsule and the cabel are OK, as I print with them to Epson SP R800 without any issue...Â
Time Capsule is correctly recognised on the local WiFi and set with correct password. USB port is working for other printers correctly. Just the 4800 is not recognised. I tried everything (deleting the printer and reseting all printers too)...Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
double sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
View 2 Replies View RelatedI wonder if anyone else has encountered/ been annoyed by this. When printing multiple documents on an Epson Stylus Photo R280, the "Epson Printer Monitor" window forces itself to the front every single time a new doc starts printing from the queue. You can be typing in another application, and each time a new doc begins printing, you lose your place and have to click back to what you were doing because the print monitor springs to the front. Does anyone know how to turn this off? Can anyone think of a way to stop it? I want my BACKGROUND printing back! I'm on a Mac Pro 2.66, OS X 10.5.4. This occurs regardless of which program I print from. I searched the Epson website, no dice. Googled my key terms, no luck there either.
View 12 Replies View RelatedI have an HP 4050TN LaserJet printer that I had networked via ethernet to my iMac (when it was running just leopard) Once I did all the updates for 10.6.8, I found that my printer is nowhere to be seen, I can't add it. Nothing. I found hp printer drivers for Lion, but I'm not going to get Lion, if i just have to turn around and get Mountain Lion in a couple of months anyway .Regarding my Scanner:When I try to use my Cannon CanoScan 8800F MP Navigater justs quits. . . . Â
Info:
iMac, Snow Leopard 10.6.8
