OS X V10.6 Snow Leopard :: Verify The Integrity Of USB Installer?
Feb 13, 2012
I decided to create a USB installer of Snow Leopard from my OSX Install DVD that were bundled in my MacBook Pro. I was wondering if disk utility verifies my USB disk image to compare it to the OSX SL install DVD and verify that the installer's DVD image matches the one in the USB? If the process was sucessful, does this mean that there were no problems creating the image?Â
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8), i5 2.5,4GB, 500GB HDD, nVidia 330m
View 3 Replies
ADVERTISEMENT
Nov 7, 2010
I've been burning a couple discs recently and as soon as it finishes burning it ejects them then tries to verify the integrity of the burn.
View 1 Replies
View Related
Apr 25, 2012
My boss and I are both using Macbook Pro's running Snow Leopard. We have always used IP based network printers for printing. He decided this morning he needed to print to a different printer on the network.When he tried to add the printer on his mac he goes to IP printer, used LPD, and starts to type in the IP address of the printer. It never comes back from verifying the printer. If he forces it, it won't print to it.
Since we are identical configurations I tried it on mine, followed the exact same steps and yet I can add the printer no problem.Any thoughts as to what might be wrong on his Mac? He can ping the printer by IP, he just can't add it. I also checked to make sure he and I are on the same VLAN.
Info:MacBookPro, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 13, 2010
i have a 27 inch iMac. I'd like to reinstall Mac OS X SL from scratch. I do have the disks that came with the mac, but they got scratched really bad so whenever I put them in, restart the mac and start installing the system after formatting the HDD the installer gives me an error saying, that the system could not be installed. The disks are scratched really bad.
So I went out and got the Snow Leopard upgrade DVD, put it in, restarted, but I can't pass the Apple logo, I don't even get to the spinning wheel under the logo, it just freezes and the optical drive stops (I hear it stop).I've tried pressing "c" while restarting, but nothing works. I've even tried downloading Snow Leopard from torrents and installing from a usb drive - same thing happens.Does anyone know how to fix that?
View 6 Replies
View Related
Oct 6, 2010
The first thing I do when I get a Mac is wipe the hard drive and do a fresh install (so I can customize). With my new Mid-2010 Hex, I used the included System disc to do the install.
But I'm wondering...am I able to use my boxed "universal" Snowleopard installer for the new Mac?
I'm trying to troubleshoot the display problem I'm having (random hits of static) and might try a fresh install from the boxed installer this time.
View 11 Replies
View Related
Oct 3, 2009
Ever Since I updated to Snow Leopard, I haven't been able to run software update nor install anything via the Installer app. The installer never gets past the "Accept/Decline" window. Once I click "Accept, it'll just bump me back to the initial installation window. I tried updating the OS with 10.6.1, downloaded from the Apple site, and the Installer won't run!! Disk Repairs, nor maintenance scripts, neither zapping the RAM did anything
View 1 Replies
View Related
Jun 16, 2012
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 13, 2009
I just downloaded the 10a380 build of snow leopard, and burned it using disk utility to a DL DVD. The burn completed successfully and the computer recognizes it. Every time I click on Install, it opens the installer and I press continue.. it says "Finding Disks" with a blue progression bar for about 30 seconds, and then exits the installer. I even rebooted the computer, holding down option, and when it gets to the screen with different partitions, the disk ejects itself. I have bootcamp with windows 7 installed if that makes any sort of difference.
View 1 Replies
View Related
Aug 28, 2009
Sounds like people are enjoying Snow Leopard. I would love to join them, but the installer can't see my system drive! Disk Utility doesn't see it either. The only possible issue is that my system drive is an SSD, but it would be impressive if Apple managed to make their OS incompatible with a drive with a perfectly standard interface. Anybody else managed to get Snow Leopard installed on an SSD, whether one that came with their system or one they installed themselves?
View 3 Replies
View Related
Jun 23, 2012
I got a used MacBook Pro 2.53 GHz 17" (Mid-2010 - MC024LL/A - MacBookPro6,1 - A1297) running Lion only.Â
I want to put Snow Leopard on one of the partitions, because I still need to use Rosetta from time to time. The computer didn't come with any installer disks... "no problem," I thought, because I own a Snow Leopard installer DVD (which says "Version 10.6" on it).Â
But it won't boot from that DVD.  The Apple logo stayed on the screen for seven minutes before I gave up.Â
Is that because this computer requires a later version of Snow Leopard?Â
What are my options for getting Snow Leopard onto this thing?Â
View 3 Replies
View Related
Apr 6, 2012
I have a Mac Mini/Snow Leopard 10.6.8 10K549. I am trying to run Software Update and it is failing to install the Software Installer Update 1.0. I have run Disk repair and Repair Permissions including booting standalone CD and downloading the update - but just keep getting "An Error has occurred".
View 4 Replies
View Related
May 12, 2012
Please give me a solution for this failed massage" installer could not copy the necessary support files " when i try to reinstall the mac osx i had this problem what can i do please help me
Info:
help me soon
View 4 Replies
View Related
Mar 24, 2012
The disk on one of our iMacs has failed, so I am seeking to replace it with a new drive and then restore from the current Time Machine backups stored on our Time Capsule. My plan was to attach the replacement drive to the iMac via a USB enclosure, format it, and recover the volume and once that is complete, replace the disk. The problem however is that the OS X installer's Restore System From Backups option does not display the correct backup volume. The Select A Backup Source displays only "Data" on network "tc" under the list of backup volumes.
Clicking on Connect to Remote DIsk brings up the authentication dialog, and I enter the correct credentials, but the volume list does not change, and the Continue button remains grayed-out. The syslog data from the Time Capsule confirms successful afp connections, and df confirms that the Data volume is being mounted from the TC. We have three Macs running 10.6.8, all writing their Time Machine backups to a Time Capsule running 7.6.1. Each computer has its own Time Capsule login ID, and all Time Machine backups have been working properly (new backups are being created and can recover files).
Using the Finder to examine the volumes on the Time Capsule, I can see that each computer has an empty Data volume and another volume with the computer's name which contains the sparse bundle that Time Machine is writing to. It looks like the issue is that the Installer is only looking for the Data volume and not showing the other volumes. Is there a super secret keyboard sequence I need to issue to get it to show the other volumes?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Sep 20, 2009
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
View 3 Replies
View Related
Mar 17, 2012
Sometimes I find it necessary to boot into Safe Mode, then reboot normally. When I reboot normally I usually get a strange window pop up asking "Where is Installer?" listing just about every Application it can find on my iMac. I usually cancel this screen and carry on regardless. I keep meaning to raise this issue on this forum but I keep forgetting about it until the next time I need to do a safe boot. Is this normal after performing a safe boot or cold it be a symptom of something sinister?
Info:
iMac, Mac OS X (10.6.8), iMac 24" 2.8ghz G6 Intel 750gb HDD, WD MyBook 2Tb RAID 1, Airpor
View 6 Replies
View Related
Mar 25, 2012
Macs Console says this every time I try to update from 10.6.7 - 10.6.8Â Â Â Â Â Â Â Â Â Â "10:08 PM Installer[244] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Â I can't update what so ever... every application basically needs to be manually installed or just comes to an unknown error either restarting the Mac or going through standalone...
Info:
iMac, Mac OS X (10.6.7)
View 1 Replies
View Related
Nov 11, 2008
I recently tried to transfer about 13,000 mp3s to my friends HDD and after about 1 hour the transfer stopped because one file was corrupt. This ruined the whole process.. Can anyone suggest a program that I can run on all the files on that HDD and verify if they are good files?
View 2 Replies
View Related
Apr 18, 2012
Model Name:Mac Model Identifier:iMac5,2 Processor Name:Intel Core 2 Duo
Intel GMA 950:Â
Chipset Model:Â Â Â GMA 950
Type:Â Â Â Display
Bus:Â Â Â Built-In
[code].....
It's running Mac OS 10.4, i have the 10.5 CD. When i click the "Install Mac OS X" icon, i get the screen were it tells me to reboot, after i reboot the installer doesn't appear, just the same screen i was at before i rebooted.Can my Mac run Mac OS X 10.5?
Info:
iMac, Mac OS X (10.5.6)
View 1 Replies
View Related
Jun 30, 2012
Using Mail 3.6 on 10.5.8. When I send from my .me account I am repeatedly ask to verify the recipient, with an oval connect button. Can I stop mail from asking me this every time?
Info:
iMac, Mac OS X (10.5.8)
View 4 Replies
View Related
Apr 29, 2010
The contents of the Address Book in my Mac is consisting of the following development over a number of years:Office 2000 & Outlook in Windows 98 Starting to use synch with Nokia phones Office 2003 & Outlook in Windows XP Office 2007 & Outlook in Windows XP Joining to Plaxo, continuing synching with Nokia phones Office 2008 & Entourage in Mac OS/X Leopard & Snow Leopard Using Plaxo, continuing synching with Nokia phones Had indications the Address Book was probably not correct MAC Mail Using Plaxo etc.
I can use the address book, send mails etc. But it seems not to be working correctly with other applications than Mail.
I cannot copy the Address Book files for backup, get error message stopping the copy; the errors take place with the image files with the address cards.
View 1 Replies
View Related
May 17, 2009
About two weeks ago, I lost my Utilities folder. I tried everything, then I tried to take the utilities off the disc that came with my MBP, but after about 30 seconds, the disc ejects, without doing anything. What should I do?
View 1 Replies
View Related
Mar 31, 2012
I rencently upgraded from Adobe Lightroom 2 to Adobe Lightroom 4 and I can't open the .pkg file with Installer. Is there another way to install an upgrade?I'm currently cloning my HD and I may reinstal the OS and try again. I get this error message.  Â
View 8 Replies
View Related
Dec 9, 2009
The only tool I have found for monitoring hard drive health is SMARTreporter[1]. Unfortunately, S.M.A.R.T. status isn't supported by USB 2 and Apple haven't implemented support for it for FireWire drives. So this app is useless.
How can I monitor hard drive integrity? I want a daemon that monitors my external drives and can notify me when sectors become unreadable/my files start getting corrupted.
1. [URL]
View 1 Replies
View Related
Jun 25, 2012
I ran Disk Utility and before it finished I received Filesystem verify or repair failed error message. It says to run repair but I can'tÂ
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
Aug 16, 2010
I saw there is a way to trick Leopard into seeing 867MHz, is there something similar to trick the installer into seeing 512MB of RAM?I know <1GB is not recommended for Leopard, but try to find cheap 512MB PC133 low-density these days, I'm still trying, but I want to install Leopard.I know that one could modify OSInstall.mpkg, but I rather want to do this another way if possible.
View 6 Replies
View Related
Apr 13, 2012
I downloaded on 3/13 the flash player installer manager, version 10.3.183.17.I have heard horror stories of the flash player installer being a virus. How do I know the signs (symptoms)? I have 10.5.8 Leopard.
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Dec 13, 2008
My friend just bought a pretty clean G3 iBook that currently is running Tiger. he wants to hook up his iPhone to his laptop, but iTunes wants him to have Leopard in order for it to see his 3G iPhon my friend downloaded the Leopard update but when he tried to run the update, the laptop gave him some sort of error that says, "installer package cannot be used can anyone throw me a lifeline or two as to what the problem is? he really wants to run Leopard but so far he isn't having any luck.
View 5 Replies
View Related
Aug 11, 2009
Yesterday I bought the Leopard install disc and loaded it up. When I tried to install 10.5.6, the installer told me that I couldn't install that version on my hard drive. I assumed it was because I only had 1 gb free, so I quit the installer and restarted so that I could free up some space. That's when the problem began. The gray startup screen came on, but then the little circle icon just spun and spun for a few minutes, then the mac shut down. I looked up some solutions on another machine. I tried selecting a startup disc, zapping the pram, etc. No good.
I started in verbose mode and it said something about an invalid sibling pair, and the last command I saw was something like 'CPU end'. I ran the disc utility from the OS X system disc, and it was unable to verify the drive. So what the heck did the OS X installer do to my hard drive? Did it corrupt the catalog? I quit the installer, so it shouldn't have touched it. (The worst part is that my super duper smart update wasn't working properly, so I need to get the data off that hard drive or I lose 2 years of work).
View 5 Replies
View Related
Dec 26, 2010
So between today and yesterday I have just been doing some casual maintenance with my Mac Mini. I decided I would run the First Aid program in utilities just to make sure everything is doing well. I was just wondering what is the difference between the two options "Verify Disk" and Verify Disk Permissions"- what exactly do each of them do? It almost sounds self-explanatory but can someone shed some light for me?
I've ran all the verification tests on each hard drive I have and repaired them when needed. So far it has only been my external WD hard drive that needed to have a repair, though I didn't notice anything wrong with it prior to running the verification test. Basically, I'm just wondering what each of the functions do.
View 2 Replies
View Related
Aug 19, 2010
So between today and yesterday I have just been doing some casual maintenance with my Mac Mini. I decided I would run the First Aid program in utilities just to make sure everything is doing well. I was just wondering what is the difference between the two options "Verify Disk" and Verify Disk Permissions"- what exactly do each of them do? It almost sounds self-explanatory but can someone
I've ran all the verification tests on each hard drive I have and repaired them when needed. So far it has only been my external WD hard drive that needed to have a repair, though I didn't notice anything wrong with it prior to running the verification test. Basically, I'm just wondering what each of the functions do.
View 1 Replies
View Related
