OS X :: Snow Leopard Installer Cannot See System Drive
Aug 28, 2009
Sounds like people are enjoying Snow Leopard. I would love to join them, but the installer can't see my system drive! Disk Utility doesn't see it either. The only possible issue is that my system drive is an SSD, but it would be impressive if Apple managed to make their OS incompatible with a drive with a perfectly standard interface. Anybody else managed to get Snow Leopard installed on an SSD, whether one that came with their system or one they installed themselves?
View 3 Replies
ADVERTISEMENT
Mar 24, 2012
The disk on one of our iMacs has failed, so I am seeking to replace it with a new drive and then restore from the current Time Machine backups stored on our Time Capsule. My plan was to attach the replacement drive to the iMac via a USB enclosure, format it, and recover the volume and once that is complete, replace the disk. The problem however is that the OS X installer's Restore System From Backups option does not display the correct backup volume. The Select A Backup Source displays only "Data" on network "tc" under the list of backup volumes.
Clicking on Connect to Remote DIsk brings up the authentication dialog, and I enter the correct credentials, but the volume list does not change, and the Continue button remains grayed-out. The syslog data from the Time Capsule confirms successful afp connections, and df confirms that the Data volume is being mounted from the TC. We have three Macs running 10.6.8, all writing their Time Machine backups to a Time Capsule running 7.6.1. Each computer has its own Time Capsule login ID, and all Time Machine backups have been working properly (new backups are being created and can recover files).
Using the Finder to examine the volumes on the Time Capsule, I can see that each computer has an empty Data volume and another volume with the computer's name which contains the sparse bundle that Time Machine is writing to. It looks like the issue is that the Installer is only looking for the Data volume and not showing the other volumes. Is there a super secret keyboard sequence I need to issue to get it to show the other volumes?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Sep 13, 2010
i have a 27 inch iMac. I'd like to reinstall Mac OS X SL from scratch. I do have the disks that came with the mac, but they got scratched really bad so whenever I put them in, restart the mac and start installing the system after formatting the HDD the installer gives me an error saying, that the system could not be installed. The disks are scratched really bad.
So I went out and got the Snow Leopard upgrade DVD, put it in, restarted, but I can't pass the Apple logo, I don't even get to the spinning wheel under the logo, it just freezes and the optical drive stops (I hear it stop).I've tried pressing "c" while restarting, but nothing works. I've even tried downloading Snow Leopard from torrents and installing from a usb drive - same thing happens.Does anyone know how to fix that?
View 6 Replies
View Related
Oct 6, 2010
The first thing I do when I get a Mac is wipe the hard drive and do a fresh install (so I can customize). With my new Mid-2010 Hex, I used the included System disc to do the install.
But I'm wondering...am I able to use my boxed "universal" Snowleopard installer for the new Mac?
I'm trying to troubleshoot the display problem I'm having (random hits of static) and might try a fresh install from the boxed installer this time.
View 11 Replies
View Related
Oct 3, 2009
Ever Since I updated to Snow Leopard, I haven't been able to run software update nor install anything via the Installer app. The installer never gets past the "Accept/Decline" window. Once I click "Accept, it'll just bump me back to the initial installation window. I tried updating the OS with 10.6.1, downloaded from the Apple site, and the Installer won't run!! Disk Repairs, nor maintenance scripts, neither zapping the RAM did anything
View 1 Replies
View Related
Jun 13, 2009
I just downloaded the 10a380 build of snow leopard, and burned it using disk utility to a DL DVD. The burn completed successfully and the computer recognizes it. Every time I click on Install, it opens the installer and I press continue.. it says "Finding Disks" with a blue progression bar for about 30 seconds, and then exits the installer. I even rebooted the computer, holding down option, and when it gets to the screen with different partitions, the disk ejects itself. I have bootcamp with windows 7 installed if that makes any sort of difference.
View 1 Replies
View Related
Feb 13, 2012
I decided to create a USB installer of Snow Leopard from my OSX Install DVD that were bundled in my MacBook Pro. I was wondering if disk utility verifies my USB disk image to compare it to the OSX SL install DVD and verify that the installer's DVD image matches the one in the USB? If the process was sucessful, does this mean that there were no problems creating the image?Â
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8), i5 2.5,4GB, 500GB HDD, nVidia 330m
View 3 Replies
View Related
Jun 23, 2012
I got a used MacBook Pro 2.53 GHz 17" (Mid-2010 - MC024LL/A - MacBookPro6,1 - A1297) running Lion only.Â
I want to put Snow Leopard on one of the partitions, because I still need to use Rosetta from time to time. The computer didn't come with any installer disks... "no problem," I thought, because I own a Snow Leopard installer DVD (which says "Version 10.6" on it).Â
But it won't boot from that DVD.  The Apple logo stayed on the screen for seven minutes before I gave up.Â
Is that because this computer requires a later version of Snow Leopard?Â
What are my options for getting Snow Leopard onto this thing?Â
View 3 Replies
View Related
Apr 6, 2012
I have a Mac Mini/Snow Leopard 10.6.8 10K549. I am trying to run Software Update and it is failing to install the Software Installer Update 1.0. I have run Disk repair and Repair Permissions including booting standalone CD and downloading the update - but just keep getting "An Error has occurred".
View 4 Replies
View Related
May 12, 2012
Please give me a solution for this failed massage" installer could not copy the necessary support files " when i try to reinstall the mac osx i had this problem what can i do please help me
Info:
help me soon
View 4 Replies
View Related
Aug 11, 2009
Yesterday I bought the Leopard install disc and loaded it up. When I tried to install 10.5.6, the installer told me that I couldn't install that version on my hard drive. I assumed it was because I only had 1 gb free, so I quit the installer and restarted so that I could free up some space. That's when the problem began. The gray startup screen came on, but then the little circle icon just spun and spun for a few minutes, then the mac shut down. I looked up some solutions on another machine. I tried selecting a startup disc, zapping the pram, etc. No good.
I started in verbose mode and it said something about an invalid sibling pair, and the last command I saw was something like 'CPU end'. I ran the disc utility from the OS X system disc, and it was unable to verify the drive. So what the heck did the OS X installer do to my hard drive? Did it corrupt the catalog? I quit the installer, so it shouldn't have touched it. (The worst part is that my super duper smart update wasn't working properly, so I need to get the data off that hard drive or I lose 2 years of work).
View 5 Replies
View Related
May 9, 2012
I changed my HD in my MacBook Pro to a bigger one and then wanted to Restore the System via Time Machine onto that new HD. Sadly I dont have the Snow Leopard DVD that was coming with the MacBook. Though I have another Snow Leopard DVD, that I purchased earlier for my older Mac. Now the Problem:When I try to Boot the Macbook Pro from the older Snow Leopard DVD it always freezes and says: "You have to restart your Macbook. Press the power button until it switches off and then press the button again". But iwill not boot from the DVD.Is there another possibility to Restore my System from my Time Machine Backup to the new HD?
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 20, 2009
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
View 3 Replies
View Related
Jul 2, 2012
My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...Â
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...Â
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic... Â
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic... Â
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 4, 2014
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdriveÂ
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
View 5 Replies
View Related
Mar 17, 2012
Sometimes I find it necessary to boot into Safe Mode, then reboot normally. When I reboot normally I usually get a strange window pop up asking "Where is Installer?" listing just about every Application it can find on my iMac. I usually cancel this screen and carry on regardless. I keep meaning to raise this issue on this forum but I keep forgetting about it until the next time I need to do a safe boot. Is this normal after performing a safe boot or cold it be a symptom of something sinister?
Info:
iMac, Mac OS X (10.6.8), iMac 24" 2.8ghz G6 Intel 750gb HDD, WD MyBook 2Tb RAID 1, Airpor
View 6 Replies
View Related
Feb 29, 2012
I have an external drive hooked up to an eMac. The plan is to install 10.5 on the drive, and then put the drive into a G4 powerbook. I booted the eMac from the 10.5 retail install disk, partitioned the external drive into 1 partition, with the 'Apple Partition Map' option selected in the options. But when I go to try to install onto the disk, it has a red X and says that the computer can not boot off of the device so it refuses to install.Â
View 6 Replies
View Related
Dec 19, 2009
My MBP will not read my cd. I was wondering if there is any way to get the installer from the cd to my laptop without having to actually use my cd?
View 4 Replies
View Related
May 7, 2012
I'm running 10.7.3 software, but im trying to install a program but every time i try to stall it.. this comes out '"You can't open the application Diablo Installer because the Classic environment is no longer supported."I was wondering if i could buy or download some type of program to run a old system...
Info:
iMac, Mac OS X (10.7.3), help me...
View 14 Replies
View Related
Mar 25, 2012
Macs Console says this every time I try to update from 10.6.7 - 10.6.8Â Â Â Â Â Â Â Â Â Â "10:08 PM Installer[244] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Â I can't update what so ever... every application basically needs to be manually installed or just comes to an unknown error either restarting the Mac or going through standalone...
Info:
iMac, Mac OS X (10.6.7)
View 1 Replies
View Related
Aug 30, 2009
I want to have both options of doing a Clean Install or an Upgrade of leopard to snow leopard.Which DVD on Amazon should I buy?Can you point me to a link/info ? And I also bought my macbook pro in late june 2009.
View 4 Replies
View Related
Aug 31, 2009
So I bought the $29 single user version. When installing it didn't ask for a serial code or anything. Can this disc be used to upgrade other systems?
View 1 Replies
View Related
Oct 15, 2009
is there a way I can have both OS's running at the same time, with Snow Leopard on the left monitor and Windows 7 on the right monitor, all running out from one computer rig (Mac Pro)?I've heard of ppl using Synergy to run dual monitors with dual computers and sharing one keyboard and mouse. I want to do the same EXCEPT run it all out of 1 computer.
View 16 Replies
View Related
Jan 31, 2012
I get the following errors:Â
The system extension "/System/Library/Extensions/AppleGraphicsControl.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.Â
[code]...Â
I have run disk permissions repair and disk repair, but these errors still come up when I turn on computer.Â
Info:
MacBook Pro
View 2 Replies
View Related
Mar 19, 2012
My system (imac, OSX 10.6.8) froze today. Moving the mouse or using the keyboard did not ask for my password. I had to turn the power off/on. Fortunately, I didn't loose much. Two questions: What happened?If it happens again, is there a less drastic solution than cycling the power?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 30, 2012
when upgrading my system from mac ox to snow leopard... do will i loose data and apps on my computer?
Info:
iMac, Mac OS X (10.5.8)
View 5 Replies
View Related
May 3, 2012
Can you tell me how to do system restore on mac
View 4 Replies
View Related
Apr 18, 2012
Model Name:Mac Model Identifier:iMac5,2 Processor Name:Intel Core 2 Duo
Intel GMA 950:Â
Chipset Model:Â Â Â GMA 950
Type:Â Â Â Display
Bus:Â Â Â Built-In
[code].....
It's running Mac OS 10.4, i have the 10.5 CD. When i click the "Install Mac OS X" icon, i get the screen were it tells me to reboot, after i reboot the installer doesn't appear, just the same screen i was at before i rebooted.Can my Mac run Mac OS X 10.5?
Info:
iMac, Mac OS X (10.5.6)
View 1 Replies
View Related
Oct 21, 2010
Right now i have 10.4.11 on my almost 4 year old macbook. Can I buy the $29 Snow leopard disk and upgrade. Do i need to do a clean install. I am kinda noob in all this so kindly suggest if this can or cannot be done.
View 5 Replies
View Related
Oct 31, 2010
In the process of doing clean install from tiger to leopard and I'm running into some issue. 1st attempt - was stuck on initial "Install" screen (After I erased my HD and selected drive to install but before the Install screen changes to show the status of the install remaining) for 35 minutes. I stopped the install and restated.2nd attempt - Finally got to the progress bar, 28 minutes remaining. However, it didn't move from there. I checked the Installer Log and it kept trying to install printer drivers and foreign fonts, but unsuccessful. Finally got an error message stating install was not complete. Restart.3rd. attempt - This time I unchecked printer drivers and fonts. Progress bar stated 18 minutes, now it's down to 17 (after like 10 minutes) and according to the Installer Log I keep getting errors in stuff (Error writing caches to /Volume/...., Input/output error, Failed to enumerate /Volumes/...., Cannot prune("com.apple.user*pictureCache*"). However, according to the progress bar, it keeps moving through the processes, still show 18 minutes now.
View 2 Replies
View Related
