OS X V10.6 Snow Leopard :: Unable To Get The Bootcamp?
Jun 10, 2012
If I do not currently own a copy of bootcamp, how would I go about aqcuiring this piece of software? You see, I reently got my iMac back from an Apple Store, and after reinstalling the Operating system, and installing bootcamp, it simply wasn't there anymore, it appeared that the application simply got rid of itself, but it doesn't matter why I don't hve it, back to the point. Could I download it from an official site? Or would I have to go to the apple store and ask for a disk of it, or for them to install it. Or am I simply out of luck and would have to purchase an entirely new apple computer to acquire bootcamp?
Info:
iMac, Mac OS X (10.5.8), My lack of boot-camp is disturbing.
I have a mid-2007 MacBook Pro, model A1226, with 4GB RAM. The optical drive has always been a little off, in that CD's written using the MacBook Pro sometimes can't be read on other systems, but it's never had problems reading CDs/DVDs. When I had Fusion installed on this machine I was able to install Windows XP and Windows 7 using the optical drive.
I want to do a Bootcamp install of Windows, either XP or 7. I have two original WinXP Pro SP2 installation disks (retail, not OEM) and one set of original Win7 Ultimate installation disks, again retail.
I did a clean install of Snow Leopard after reformatting (erasing) the hard disk, and ran software update. Then I ran Boot Camp Assistant and created a bootcamp partition. When I insert an installation disk and click on Start..., after a moment it ejects the disk. Over and over. I repeated this many times, with all of the install disks, and the results were the same.
Except once, and only once, it actually started installing WinXP. Per the instructions I had WinXP format the bootcamp partition, but the install hung near the end where it was trying to save settings. Apparently this is a common scenario that some people think is related to having a USB keyboard and mouse connected, but it still hung for me even if I connected a wired keyboard and mouse.
Lots of reports of similar problems on the web, and I tried a number of suggestions I found here and elsewhere, including:Attached an external DVD drive. The install DVD doesn't get ejected, but I still get the folder/question mark and failure to reboot for all the installation DVDs. I suspect that my model MBP doesn't handle booting from external optical drives very well, if at all. Make copies of the install DVDs. Although the copies seem to work the same as the originals on my iMac, they produce the same results using both internal and external optical drives.Made a number of different bootable USB sticks, but never found a way to have the required guid partition table at the same time as the Windows boot image, so they weren't bootable on my MacBook Pro.Installed rEFIt and tried using that to boot from USB (still not recognized as a bootable device) and from internal and external drives containing the original or copied installation DVDs. Still get the folder/question mark icon.
Generally after clicking on Start Installation the system won't boot from the internal drive, but sometimes holding Option works; other times it just refuses to boot until I've tried it multiple times or booted from the Snow Leopard install disk and adjusted the boot record.
Supposedly listening to the drive and tapping on the case works, but not for me. I haven't yet tried loosening the mounting brackets because I'm still looking for a T6 driver, but that's another common suggestion.
Info: MacBook Pro, Mac OS X (10.6.8), Model A1226 4 GB Ram
AFAIK, I will be needing the snowleopard installation cd for the drivers in windows after I finish installing windows(xp). However, I bought this MBP from ebay so it came with leopard cd only but with snowleopard installed on the macchine.
So I am wondering if leopard cd works as well to obtain drivers for the windows?
I have a unibody 13" MacBook running Leopard with Bootcamp running Windows Vista. I want to try and make the move this weekend to both Snow Leopard AND Windows 7.
First, what is my best plan of attack here? Will Snow Leopard install just fine and ignore my current 25gb partition of Vista currently set up? (i.e. not effect it at all). I would assume so but I'm not totally sure.
Second, what is the best way to go about installing Windows 7? I am a university student and I will be getting the $30 upgrade version of Windows 7. I've heard that doing a clean install is the best way to go instead of going over vista, so I hear I need to make an iso out of the upgrade version and use that?
I'm planning on doing Snow Leopard first, then Windows 7 second as this seems like the most logical order for me.
I have a copy of Snow Leopard on the way and am wondering what I will have to do? Does you need to back up everything, or does it "dynamically" install? Either way, will I need to do anything to keep my bootcamp partition working?
On another note, I currently have Vista Ultimate in bootcamp and want to change to Windows 7. Is there a way to "upgrade"? Or will I have to clean install and rebootcamp?
I installed a beta version if windows 7 into my computer last night. Now everytime I want to use snow leopard I have to use press the option button. Windows boots automatically. I took windows off and now snow leopard wont work at all. The screen just goes black and it says a few words like install. How do i get snow leopard to start when I turn my computer on?
I find myself using Mac OS X Leopard less and less and windows almost all the time these days and on the occasion that I need leopard i find it suits me fine. I want to be as up to date with boot camp as possible but don't want to upgrade to snow leopard (I need the current version of Quicktime for my video editing software so cant risk going to QT-X) so can i install Bootcamp 3.0 without installing SL? I really want to be able to read my Mac drives (I need my itunes!!) from Windows.
I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk. It is the disk that came as a drop-in dvd with the MBP, along with its original install disks. If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation? Or do I use my leopard install disks that came with my computer? Is the snow leopard bootcamp process any different from the process in leopard? I had windows Vista on there fine before upgrading my hard drive and going to snow leopard. Do I need to print out those 25 pages again?
I'm by no means very tech savvy. When I tried to install Windows XP (Home Edition) on my Macbook Pro via bootcamp, I experienced a bit of trouble. I partitioned the hard drive as instructed, then inserted the Windows XP installation disk and hit continue. This is when the computer more or less took over and started doing it's own thing. After a while the screen went blue and the windows install prompts were flashing across the screen. At this point I'm still thinking all is good; I accepted the terms of use etc.
However, once the install was complete, it kept asking me to insert the Windows XP Home edition CD. Even though it was already in the disk drive. I tried to hit continue but it kept taking me back to the screen asking for the disk to be inserted. Eventually I quit out of the install (upon doing so the screen prompted me the install did not work), ejected the windows install cd, and restarted my computer back into osx. Is the newest version of osx, snow leopard, not compatible with microsoft xp? Do I need to purchase vista or windows 7 if I am to run boot camp successfully?
I'm not completely sure how time machine works, can I use it to backup everything on my computer, including applications, bookmarks, system configurations. The reason I ask is I need to re install snow leopard because of something that went wrong during a bootcamp setup, and I'm thinking that re-installing the OS might work.
I have Windows 7 running in a bootcamp partitiion with Snow Leopard on my iMac. If I upgrade to Lion, will the partition be left alone and function as before? I cannot lose appliations and data stored in Windows in the bootcamp partition.
Info: MacBook Pro and iMac 27", Mac OS X (10.6.4), MBP: 2.66 GHz, Core 2 Duo, 8 GB RAM, 500 GB HD. iMac i7, 2tb HD
I own a MacBook Pro 13 [mid 2009]. I've upgraded it to 8gb ram. My problem is I'm not able to decide if I should install windows 7 using parallels 7 or bootcamp. Also will it slow down the machine.
I have bootcamp installed and Win7 64 bit on that partition. I can drag and drop files from WIn7 to the Mac Drive ... but I can not drag and drop from the MAC desktop to the BootCamp Drive or any folder. I have the drive set for sharing ... but the Privledges ar READ ONLY .. in the "get info" screen. but ti seems to fixate on problems installing WIN7 ... I'm well past that I just want to copy and paste from each drive backa nd forth!
before i used my pc labtop to play games like Battlefield 3 and i would use my xbox360 controler on it but it crashed my pc and made it unplayable so now im started using my mac and i lost my windows 7 disk for bootcamp.
I'm using the Snow Leopard Develpoer Preview, and the latest installer Image I have is 10A380, however everytime I installed the Win 7 (X64) and wanna install the Bootcamp 3.0, it just crashes after installing NV graphic driver and told me restart the computer and continue, but when I followed instruction and reinstall the Bootcamp, it just crashed again...
I know this is probably a stupid question. I'm about to set up windows 7 on my iMac. I've recently updated to Snow leopard. My question is once I have windows 7 installed do I have to use the snow leopard disk, or the disk that came with my computer to load drivers?
I have a new 21.5 Imac (with the ATI Radeon HD 4670) on which I have just installed Windows 7 32 bit version. Everything worked great and upon starting Windows 7 for the first time my network is working, the ATI 4670 drivers seem to be installed automatically and also sound drivers seem to be there, everything of this Windows 7 did automatically. So my question is: why do I need the Bootcamp drivers from the Snow Leopard disk, what extra value will they provide? Can it hurt my computer all togehter if I skip the drivers from the Snow Leopard disk? will it perhaps have drivers other than above that are absolutely needed for the system to function properly?
I am considering making a w7 partition with bootcamp to use for gaming and game making, but am not sure how much data to put on it. I have a total of 250gb on my hard drive and 175.23 gb available. I'll still use my mac side for a lot of things so I want sufficient data on there. On the topic of hard drive expansions, I have many external drives so if I could use one of those to expand my hard drive I'd be willing to?
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
I want to make a clean reinstall of snow leopard without removing my bootcamp partition. Is it possible to do that and to continue using windows after the reinstall?
After installing Snow Leopard, the volume icon for my Windows XP Bootcamp partition has changed back to the default Hard Disk icon. As it is formatted NTFS, I am unable to change the icon within OS X. I used to change it by applying the desired icon to a memory stick, then within Windows, copy the hidden icon files from the memory stick on the base directory of the 'C:' Drive.
When in Leopard, it would recognise the icon that I had applied to it - but ever since I installed Snow Leopard, this trick no longer works and I cannot find a way to change it (other than to change my Bootcamp partition to FAT32, so I can apply an Icon within OS X - but this means reformatting and is slightly OTT for just an icon ) This occurs both after doing a Upgrade install on my MacBook Pro, and a clean install on my iMac, both with already existing Bootcamp partitions. I might try by making a new Bootcamp partition now Snow Leopard is installed, but I don't see how that would be any different to the ones I currently have.
