Windows On Mac :: Installing With Snow Leopard Bootcamp
Oct 16, 2009
I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk. It is the disk that came as a drop-in dvd with the MBP, along with its original install disks. If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation? Or do I use my leopard install disks that came with my computer? Is the snow leopard bootcamp process any different from the process in leopard? I had windows Vista on there fine before upgrading my hard drive and going to snow leopard. Do I need to print out those 25 pages again?
I have a unibody 13" MacBook running Leopard with Bootcamp running Windows Vista. I want to try and make the move this weekend to both Snow Leopard AND Windows 7.
First, what is my best plan of attack here? Will Snow Leopard install just fine and ignore my current 25gb partition of Vista currently set up? (i.e. not effect it at all). I would assume so but I'm not totally sure.
Second, what is the best way to go about installing Windows 7? I am a university student and I will be getting the $30 upgrade version of Windows 7. I've heard that doing a clean install is the best way to go instead of going over vista, so I hear I need to make an iso out of the upgrade version and use that?
I'm planning on doing Snow Leopard first, then Windows 7 second as this seems like the most logical order for me.
I'm using the Snow Leopard Develpoer Preview, and the latest installer Image I have is 10A380, however everytime I installed the Win 7 (X64) and wanna install the Bootcamp 3.0, it just crashes after installing NV graphic driver and told me restart the computer and continue, but when I followed instruction and reinstall the Bootcamp, it just crashed again...
I have a copy of Snow Leopard on the way and am wondering what I will have to do? Does you need to back up everything, or does it "dynamically" install? Either way, will I need to do anything to keep my bootcamp partition working?
On another note, I currently have Vista Ultimate in bootcamp and want to change to Windows 7. Is there a way to "upgrade"? Or will I have to clean install and rebootcamp?
I currently have the Win 7 Beta installed on a dedicated internal hard drive (in my Mac Pro). I originally installed it using Bootcamp, then later bought VMware Fusion 2.0 so I could hot swap between OS X and Win 7. Fusion detected my original Bootcamp installation; I didn't do any reinstallation of the Beta.
I upgraded to Snow Leopard last week.
I'd like to install the Release Candidate. I realize it requires a clean install (I don't want to mess with using the terminal workaround I've heard about for installing over the Beta). What's the best way to do this? Should I simply run the Snow Leopard version of Bootcamp and have it do a new install? Do I have to wipe and reformat the Win drive, or will Bootcamp take me through that automatically.
AFAIK, I will be needing the snowleopard installation cd for the drivers in windows after I finish installing windows(xp). However, I bought this MBP from ebay so it came with leopard cd only but with snowleopard installed on the macchine.
So I am wondering if leopard cd works as well to obtain drivers for the windows?
I have a MacBook, 2Gig memory, 2.18 mhz, running leopard. My best Bible software has to be windows (Logos) Mac version is no where near its potential here, everything PC has crashed in last 8 months. I pulled out o;d Parallels 3 and a whole bunch of old software, getting ready to get to migrate to Win 7.
I have ordered Snow Leopard. I have ordered Parallels for Mac ver 4 (OLD VER ?) Getting free upgrade to Parallels 5 Will probably get an OEM version of Win 7 Ultimate.
1- Can I just install the upgrade to parallels 5 2- if I have to install parallels 4, all I have is XP. 3- My Logos Bible software will 'Sing' on Win 7 need to get there 4- Do not want to reinstall XP as Win 7 has to gut it.
I would rather just not do any of this and wait for my first SS check! But I have to and do not know what to do first. It would seem Snow Leopard but I do not want to do Parallels 4 then parallels 5 if I do not have to. I am canning all my PC stuff and love the intuitiveness of all Apple stuff including software.
I installed a beta version if windows 7 into my computer last night. Now everytime I want to use snow leopard I have to use press the option button. Windows boots automatically. I took windows off and now snow leopard wont work at all. The screen just goes black and it says a few words like install. How do i get snow leopard to start when I turn my computer on?
I find myself using Mac OS X Leopard less and less and windows almost all the time these days and on the occasion that I need leopard i find it suits me fine. I want to be as up to date with boot camp as possible but don't want to upgrade to snow leopard (I need the current version of Quicktime for my video editing software so cant risk going to QT-X) so can i install Bootcamp 3.0 without installing SL? I really want to be able to read my Mac drives (I need my itunes!!) from Windows.
I'm by no means very tech savvy. When I tried to install Windows XP (Home Edition) on my Macbook Pro via bootcamp, I experienced a bit of trouble. I partitioned the hard drive as instructed, then inserted the Windows XP installation disk and hit continue. This is when the computer more or less took over and started doing it's own thing. After a while the screen went blue and the windows install prompts were flashing across the screen. At this point I'm still thinking all is good; I accepted the terms of use etc.
However, once the install was complete, it kept asking me to insert the Windows XP Home edition CD. Even though it was already in the disk drive. I tried to hit continue but it kept taking me back to the screen asking for the disk to be inserted. Eventually I quit out of the install (upon doing so the screen prompted me the install did not work), ejected the windows install cd, and restarted my computer back into osx. Is the newest version of osx, snow leopard, not compatible with microsoft xp? Do I need to purchase vista or windows 7 if I am to run boot camp successfully?
I know this is probably a stupid question. I'm about to set up windows 7 on my iMac. I've recently updated to Snow leopard. My question is once I have windows 7 installed do I have to use the snow leopard disk, or the disk that came with my computer to load drivers?
I have a new 21.5 Imac (with the ATI Radeon HD 4670) on which I have just installed Windows 7 32 bit version. Everything worked great and upon starting Windows 7 for the first time my network is working, the ATI 4670 drivers seem to be installed automatically and also sound drivers seem to be there, everything of this Windows 7 did automatically. So my question is: why do I need the Bootcamp drivers from the Snow Leopard disk, what extra value will they provide? Can it hurt my computer all togehter if I skip the drivers from the Snow Leopard disk? will it perhaps have drivers other than above that are absolutely needed for the system to function properly?
I want to make a clean reinstall of snow leopard without removing my bootcamp partition. Is it possible to do that and to continue using windows after the reinstall?
After installing Snow Leopard, the volume icon for my Windows XP Bootcamp partition has changed back to the default Hard Disk icon. As it is formatted NTFS, I am unable to change the icon within OS X. I used to change it by applying the desired icon to a memory stick, then within Windows, copy the hidden icon files from the memory stick on the base directory of the 'C:' Drive.
When in Leopard, it would recognise the icon that I had applied to it - but ever since I installed Snow Leopard, this trick no longer works and I cannot find a way to change it (other than to change my Bootcamp partition to FAT32, so I can apply an Icon within OS X - but this means reformatting and is slightly OTT for just an icon ) This occurs both after doing a Upgrade install on my MacBook Pro, and a clean install on my iMac, both with already existing Bootcamp partitions. I might try by making a new Bootcamp partition now Snow Leopard is installed, but I don't see how that would be any different to the ones I currently have.
I cant delete my windows partition,every time i open bootcamp and click continue is says"The startup disk cannot be partitioned or restored to a single partiton" i want to delete it but i can.
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
I just downloaded the RC of Windows 7 (64-bit) and am trying to install it on my 2 month old macbook pro. This is my first mac, so i'm still getting used to it. I have created a dvd with the w7 iso image on it, created a 20gb partition using bootcamp, and now at the step of installing w7 on that new partition. The problem i'm running into is when trying to install, it says the partition needs to be formatted as NTFS. After backtracking and not seeing an option to make this new partition in NTFS format, i'm at a dead end. What can I do now?
I use SL Bootcamp Assistance and installed Windows 7 RTM on my Mac mini, but after installation no Bootcamp in Windows.
My Mac Mini use an Apple mouse but a wireless PC keyboard.
My questions are:
1. Anyway to get the Bootcamp back so I can choose to boot in Mac OS X?
2. With the PC keyboard, how to "option-key" so I can select the boot device while power on?
BTW I purchased my Mac Mini in April 2009 and did a brand new install of SL. I noticed when used Bootcamp Assistance it said my machine cannot support x64, but I followed a post in this forum to "force run" BootCampx64 under /Bootcamp/Drivers/Apple of the SL DVD. Is it the reason why Bootcamp is gone?
The only copy of windows XP i have is pre SP2. I tried to install this last night via boot camp, but after spending hours installing and loading the drivers from the mac disc, not all were installed. Then I was hardwired to my router to run windows update to get SP2/SP3 I could not for the life of me get the 3 drivers to install.
Ethernet controller, although the ethernet port worked. Bluetooth driver, cannot find the driver on the Mac disc VGA driver, cannot find the driver on the Mac disc
I also don't seem to have a wireless connection or even an option to use my wifi card on my macbook with windows.
realised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
