I have an old macbook pro with damaged dvd drive. Yesterday when I tried to reinstall my mac osx snow leopard, my operation system was damaged and it cannot boot anymore. Now I have an installation dvd of mac osx and a pc. I tried to make a bootable usb drive from from my dvd but I cant.
Info:
MacBook Pro, Mac OS X (10.6)
I'd like to create a bootable Snow Leopard Flash Drive, after upgrading to Lion. I have multiple Macs with some expensive legacy software and an Apple USB modem (32 bit) I use out in rural areas. I'm assuming this will be a viable solution
View 2 Replies View RelatedI just purchased the SN 10.6 family pack and would like to make a backup of the Install DVD. I have several MACs in the family and want to make sure I have an extra disk in case something happens to the original. I have Toast Titanium and I believe I can make a copy of the disk. Will this be an exact copy and will it be bootable from the DVD drive on my iMac? Are there any special settings in Toast that I have to use.? I only recently purchased Toast and am not too familiar with it at this point.
View 5 Replies View RelatedI would like to know how i can create a bootable pen drive for to install windows 7 on my netbook.
(i want to install windows 7 not on my macbook but on a vaio netbook)
I am running the latest Snow leopard using an imac 10.6.8. I am looking to upgrade to Lion or possible Mountain Lion if I can wait a few months, but I would really like to perform a clean install so that I can start a fresh.
Info:
iMac, Mac OS X (10.6.8), 3.06 GHz Intel Core 2 Duo 4GB ram
I created a bootable usb drive on a windows pc using windows 7 to install windows 8 preview and want to make a copy to install in virtualbox on my imac and burn to a dvd that will work on pc.
I've tried using disk utility to create an image and get a file ESD-USB.dmg, but virtualbox won't boot a dmg file.
I tried converting it in the terminal with:
hdiutil convert -format UDRO -o windows8.iso ESD-USB.dmg
but the resulting file was windows8.iso.dmg. I changed the name to windows8.iso, but even so, virtualbox complains it's unbootable.
I tried the terminal command:
dd if=/dev/disk4 of=windows8.iso
but virtualbox complained that it's not bootable.
I tried the terminal command:
cat /dev/disk4 > windows8.iso
but virtualbox complained that it's not bootable.
Info:
iMac, Mac OS X (10.7.4)
I want to install Windows 7 on a friends' computer, which at present, has no working OS on it. The tricky part is her optical drive is totally kaput. I've been able to find some instructions on how to make live USBs in leopard (like these), but so far, none of them have been bootable by a PC.
When I try to use the disk utility's "restore" function, I get an error message saying "Could not validate source - error 254"
I've googled around for other possible solutions, but haven't turned up anything. Has anybody here been able to figure this out?
I have a white MacBook. I tried to update my 10.5.8 Leopard installation to Snow Leopard with the upgrade DVD I just got. Unfortunately, update failed on me. After being noticed by the installer that the update failed, I ended up with a NON-BOOTABLE MacBook, that whenever I try to boot from hard drive, after showing me 30 seconds of the "spinning ball" that indicates activity, shuts down. I tried it like 10 times, same result. What happens if I boot from DVD and try an installation that way? Will it try to upgrade? Will it wipe my hard drive content?
View 2 Replies View RelatedI want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
View 8 Replies View RelatedI purchased an app online, and seeing as they had an option to download the app, I downloaded it. (I do believe I still have available to me the option of the cd to be shipped, but I'm not sure) Now I need to use it in a way that requires it to be booted off a cd... The software downloaded was in a disk image format. Are there any specific instructions/steps I need to take in order to ensure that I produce a bootable cd? I'd hate to waste a perfectly good CD-R by a stupid mistake of making it non-bootable.
View 1 Replies View RelatedI am trying to figure out what the best way is to create a bootable DVD frm a DMG file?
Upon first purchasing Leopard 10.5 way back when it came out, I decided to back up the disk on my computer by creating a Disk Image. Turns out it was a good move because now that I need the disc, it seems to have picked up a big scratch on it's surface, and it simply refuses to mount at this point...
I can use either Toast or Disk Utility to accomplish this task (or the terminal if absolutely necessary, but I would really prefer using one of the GUIs I've just mentioned). I was hoping someone would be gracious enough to provide me with instructions on what would be the best way to create a bootable DVD from this DMG file.
I've been trying to create a bootable SD card (transcend 32BG). I follow all the instructions but when it tries to boot after using the installation disk it ends up stuck on the gray screen.
View 7 Replies View RelatedI have the folder and files of an Operating System which I want to make an ISO of.
I want to create a BOOTABLE ISO so I can burn it to DVD and install.
How can I do this? I also have Toast v10
yesterday my mac wouldn't boot-up(froze at the spinny circle thingy below the apple). I did get it fixed though... with disk utility off the leopard installation dvd. Now i am wondering if it is possible to create a bootable dvd...
btw, i have tryed clone x 3, but it is way to expensive and there is no "finder" like app...
I'm trying to fix a frozen chkdsk on an imac. It can't see the keboard yet so you can't stop the chkdsk. Next step is to try to boot into dos to fix some things.
Anyone know how to create a msdos bootable cd [that an imac can read]? I can create the cd in a working windows environment. I have found many dead end links online thus far.
Can anyone tell me how to create a bootable disc of iDefrag using Toast Titanium? I want to run a full defrag but need to do so off of a disc.
View 2 Replies View RelatedI've just bought my iMac which came with no backup/bootable software discs at all (unlike new PC's). So from my over an hour reading from GOOGLE with conflicting answers from what I can gather "Time Capsule" cannot create a bootable copy of your hardrive ... So, I as have a 1TB harddrive with the iMAC some questions I have are :
1. ) Do I need to purchase a 2TB external hard drive (minimum) to create a clone of the current harddrive & any future information stored on it as I intend to backup once a month. It "MUST" be a bootable backup as I have no discs!
2.) Is there any "cloud" storage services that I can make a bootable backup on that which can be accessed later to download via another PC or MAC to a harddrive/memory stick etc. & then uploaded to the new replacement hardrive in my iMAC?
3.) Off the subject altogether but just thought of it! I hate the keyboard with the iMAC even though its stylish it isn't lit which isn't helping me at night! So when using my old keyboard (which does light up) can I tell the iMAC to use the sign in the normal place rather than the number 2 key as well as other keys which are in different places on the iMAC compared to a PC keyboard !!!
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.3), 3.4 GHz Intel Core i7; 8GB of DDR3
as above stated how do you guys create bootable usb live linux keys
View 3 Replies View RelatedI used Carbon Copy Cloner to create a bootable backup of my internal hard drive. I was wondering how you initiate the bootable backup if I do have an internal hard drive failure? Do I just plug the drive in and power the computer on? Are there any other steps/precautions I should consider.
View 2 Replies View RelatedTried to create a bootable clone using Disk Utility & got this:“Restore Failure, Recovery partition restores can only be done on GPT partition maps.”I may need to purchase Carbon Copy Cloner ($40) or Super Duper ($28).I had been using my free CCC v. 3.4.7 to make clones of OS X 10.6.8 but now I upgraded to OS X 10.9.4 & got message that CCC not compatible with Mavericks unless I buy the CCC v. 3.5.6.I read several places that DU can do back up clones same as CCC or SD!I launched DU from recovery system, selected Mac HD as source & my XHD as destination. Both are formatted Max OS Extended (Journaled)So, what am I doing wrong?Also, what advantages, if any, are there in using CCC or SD instead of the free DU?
Info:
iMac, OS X Mavericks (10.9.4), 4 GB RAM, Win XP Pro-Boot Camp
Is it possible to create a bootable disk image of my hard drive onto an extrenal firewire hard drive?
View 1 Replies View RelatedI have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Info:
Mac mini, Mac OS X (10.6.8)
I'm using Mail 4.5 and have a group of people I'll need to email regularly, most of whom aren't in my Address Book. Is there a simple way I can create a group with these contacts in it from their addresses on the last email I sent them? I don't want to enter them all into my address book inidividually.
View 1 Replies View RelatedCan somebody please tell me how to create my own keyboard shortcut
View 3 Replies View RelatedIs it possible to create a calculator automation? I have to do this same simple equation many times in the day and would love if there was an automation to make things faster.
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm trying to create a keyboard shortcut for the Dev1 menu:What should I put in the shortcut preferences? I've tried:
[code]...
I am trying to create a workflow that will monitor a webpage and send me email if the page contains a certain keyword. I got it working, I get email; the email contains the keyword, or is an empty message when the keyword is missing.I would rather not get these empty messages is possible. Until I figure this out, I may send these message at some gmail address and create a fiter there to forward only message with that keyword. Not elegant but should work. Anyway, long term I want a more elegant solution. Here is what I have in Automator:
1) Get Specific ULRs
2) Get Text from Webpage
3) Filter Paragraphs (and here is where I check whether the keyword shows up or not)
4) New mail message (which contains they keyword from #3, or is empty)
5) Send outgoing messages.
As I said, the workflow always works, and will send a message with that keyword, or an empty message. How do I make the workflow send email ONLY if they keyword is detected? There is not IF in Automator as far as I can see. This is the first time I try to do something in Automator so maybe I am missing something.
Info:
Mac OS X (10.6.8)
How to create a new folder on a NAS disk with the autorisation drwxrwxr-xWhen i create a folder on my Network Disk with my MacBook Pro under OSX 10.6, the autorisation is:drwx--S---3 Yvnjewab70 Tue Jun 5 09:55:17 2012 Exercices.But when i do the same from my Windows XP computer i have what i want:drwxrwxr-x5 Yvnjewab67 Wed Sep 14 16:36:13 2011 Parerasse Maison.
View 2 Replies View RelatedWhen sending an email to a pecific address.I need a pop-up elert to remind me about something before I press SEND.Simple is better, just a huge "STOP".
Info:
iMac, Mac OS X (10.6.8)
