how do i install Mac OSX Leopard on a drive other than my Snow Leopard computer? I need to access old files that will not open with new OS.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
Clearly there must be a way to do this, right? Can I install off an external hard drive? Off a USB drive? Share my macbook pro's DVD drive somehow? If the hard drive on the mac mini is completely reformatted and I plug it into the USB port on the external hard drive which I partition and install the Leopard DMG would it be able to boot off of it?
View 9 Replies View RelatedI have a MacBook with a broken superdrive, it does not like dual layer disks. The MacBook does not have a OS on it, I'm trying to put leopard. Is there anyway to install it without a dvd drive or firewire? I have a windows computer, and a 8gb thumbdrive. I can put the MacBook's harddrive into my windows computer, is there anyway I can copy the disk onto that?
View 5 Replies View Relatedhow I can take a leopard install dmg and install leopard onto my Macbook's HDD by using a 8 GB USB Flash Drive.
View 5 Replies View Relatedon my Mac Pro (2.66Ghz) I have two hard drives. One contains Leopard and the other hd is used for Time Machine back-ups.I want to add another hard drive that will contain Leopard and Windows XP using Bootcamp.fter I install Leopard on the newer hard drive how can I choose which hard drive to boot from? Also, on a bad day I want to boot to the XP partition on the new drive
View 1 Replies View RelatedBasically I have a copy of the OS X 10.5 DVD's that came with my Mac saved on a separate partition of my hard drive in my MBP. I am currently having a few problems and want to do an fresh install from this partition. Is there anyway to get the DMG image bootable?
I hold down the option key whilst restarting and it sees the partition but it won't boot. I even tried a restore from disk utility; still nothing.
So I have a MBP Early 2008, and the dvd drive has died (still under warranty, just don't want to get it fixed at the moment)
Also have a Mac mini WITH a working dvd drive. Anyway I tried the dvd drive sharing. I can see it on my MBP, even open the disc, but when i double click the install mac OSX icon, NOTHING happens.
So I used toast to make a DMG, and transferred it using my USB drive.
Managed to open it on my MBP , but when I click the icon again, this time it says not supported or some error message.
Any ideas what is going on, or if there is an alternative method I can install ?
The disc works fine on the mac mini, and the installer starts fine (but I am not upgrading that one at the moment)
I put the leopard install disk into my computer and started installing it. It went fine until it asked me where to install Leapord. With all other installs (applications, games, etc...) my hard drive will show up and that's what I'll click on, but here nothing shows up except my iPod that was plugged in. As a note, it worked on my other computers, but is not working on my G5.
View 2 Replies View Relatedi will get my new 500GB seagate drive in the mail i was just wondering if i should fresh install. or just go for the standard CCC. doing a fresh install would take hours because i would need to install tiger the upgrade to leopard, then software update. then copy all the info from my old drive
View 3 Replies View RelatedI can't install Leopard on a USB drive from my iMac, then move the drive to my Air and boot that? It's just for emergency purposes, so if trackpad gestures are missing or something, no big deal. I just want a DiskWarrior drive I can use on all my Intel Macs--especially the Air with no DVD drive. (I know I could install OS X using the Air itself--but wireless installation would be slow. Better to install OS X quickly on my iMac via USB.)
View 5 Replies View RelatedI have a MacPro which I've bought a new drive for, and need to install snow leopard. My question is, can i just insert the disk and install or do I need Leopard installed first?.. if that's the case, where do i buy Leopard from as no where sells it anymore.
View 3 Replies View RelatedI put my Leopard install DVD (DVD drive is down) onto a flash drive to install on my 12" PowerBook G4 1.5ghz but when it restarts it just boots back into Tiger. I attempted to reboot and hold option but the only boot choice is the HD. Even if I go to Preferences>Startup Disk there's no option to boot from the Flash Drive.
View 2 Replies View RelatedSo my optical drive in my MBP will read single layer DVDs but not dual layers. I am currently running 10.5 and my end goal is to have 10.6 (snow leopard) on my MBP with a clean install. Problem is, my purchased copy of 10.6 can't be read by my MBP. Here is my thought process: 1st Option: Use the Remote Install OSX application to use another drive on my network. So I boot up the program on other macs in my house, restart my MBP while holding down the option key. Yet, my airport network never shows up on the white apple loading screen (just Macintosh HD). So I can't get the remote drive stuff to work.
2nd Option: Use an external HDD. Problem is is that I didn't know you have to have a blank partition for this. I have a 1TB WD External HDD with 18gigs free, but in order to make a partition, I would have to erase the drive first (am I correct on this?) I can't lose this data, and I don't have another external HDD. So is my only other HDD option to buy like a USB 16gig thumb drive (or really really cheap external), partition it with snow leopard dmg on it, and install with that?
I have a PPC iBook G4 with 1.3 Ghz and 1 GB SDRAM that I bought new in 2006. I've never had a single problem with the machine, but it doesn't have a superdrive and the OS Tiger capabilities are limiting.
Last year I upgraded to Leopard with a .dmg via FW external drive and loved the interface, but with only a 40GB HD I deleted any app I didn't need. Over the summer I bought a new iMac, but I still need the laptop whenever I'm away from my desk. I tried erasing and reinstalling now that I don't have to keep much data on the drive...interested in getting back those non-essential apps. I've done it before with the exact same resources, but this time it's not working. I'm hoping someone out there can tell me what step I'm forgetting.
Here's what I've done:
1. Connected iBook to iMac in target mode via FW and erased/partitioned HD in Apple Partition Format.
2. Reinstalled Tiger on iBook from original disc.
3. Connected iBook to external drive via FW and restored .dmg to smaller partition on iBook.
4. Opened .cdr on smaller partition, saw the Leopard disc image, set the Leopard install disc as the startup disc in System Preferences. Hit restart button in System Preferences and got the little "not happeneing" noise.
5. Went to desktop and opened the Leopard installer disk image and pressed the install/restart button there. Reboot was slow and dark at first, but ultimately booted Tiger.
6. Went back to System Preferences, selected Leopard install disc as the startup disc again, locked the selection and restarted...booted Tiger again.
7. Tried these tactics again while holding option key and then S key at restart, but the second partition with the installer was never recognized. Tried from Safe Mode, only booted Tiger.
8. Then I tried connecting the external drive again and opened the .dmg, then .cdr from there. Again System Preferences recognized the installer, but it would not boot with the same variables as before.
9. I connected the iBook to the iMac in target disc mode again and ran disc utility, all good. Then I did same with external drive, all good. I made sure both drives and the install disc image were bootable. Tried the boot again from both, all bad.
10. I did a lot of reading on troubleshooting this process and thought it might be a permissions problem, that the installer was not executable. I did a terminal tutorial and managed to make the partitioned drive and disc image both owner enabled. Still the exact same results as when I started.
Hi, I have a macbook with a broken DVD drive (one out of twenty problems I have had with this computer ), and was wondering if it is possible to install leopard without the internal DVD drive? I cannot really afford to replace the slot loading drive atm, nor buy an external usb drive.
Is it possible for me to connect my laptop to my friends iMac running 10.3, and using his computer as an external drive to install leopard?
I've been a long time lurker on these forums and you've helped me out numerous times when my computers decided to stop working.
I got my Snow Leopard disk in the post today but unfortunately my disk drive in my Macbook Pro seems to finally be well and truly knackered.
I should be able to borrow a usb/firewire disk drive from a friend, so would I be able to install ok from this external drive, and is there anything I would need to mess around with to make it work?
I jacked in my external drive and I get a alias message error. Not sure what to do. Does you have this problem with your external drive?
View 24 Replies View RelatedMy 3 year old MacBook's ComboDrive doesn't work and I was wondering if I could Install Snow Leopard via a shared SuperDrive from a MacBook Pr over Wi-Fi. Is it possible to copy the installer locally and then install Snow Leopard or would I have to get an External SuperDrive?
View 2 Replies View RelatedWhen leopard installs will it reset my hard-drive like a PC? Basically I have a lot of essential programs installed, such as FCP which I dont have the discs for anymore and I dont want to loose these programs, but I really want to upgrade to leopard.
View 3 Replies View RelatedMy macbook's optical drive doesn't work so I was hoping to find a way to remotely install Snow Leopard. I've got the most recent Leopard update. I could really use that extra six gigs!
View 1 Replies View Related"In addition, it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead."
I'm a newbie here but wonder if the above AppleInsider statement is true. I installed Snow Leopard over my existing Leopard w/out a hitch. Earlier OS X retail DVD versions clearly distinguished between "Install" and "Upgrade" - correct?. I'm confused where I read Snow Leopard required an existing OS (Leopard or Tiger) to install. It appears Snow Leopard is a "full install" DVD?
I've been searching but I can't find anywhere where my specific problem is answered. Short version: Does Remote Disc work in Tiger (10.4.11)? Long version: I have the following:
Macbook running 10.4.11; busted DVD drive
PC running Win7 w/ Firewire port
Snow Leopard install disc
I'd like to get Remote Disc running on my laptop and install over the network (using my Win7 PC). I've done the terminal hack which is supposed to enable Remote Disc on MacBooks. However, Remote disc doesn't show up in my finder (not sure that 10.4.11 has a place for it to show). Does Remote disc work with Tiger-Macbooks? Or do you need Leopard? If Remote Disc won't work, can a Win7 PC install Snow Leopard via firewire to a Mac? If possible, I'd like to avoid buying an external DVD drive, as it appears Remote Disc will work in Snow Leopard. Don't have a firewire cable on me but I could buy one -- just want to be sure it will work before I waste the money.
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Info:
MacBook Pro (13-inch Late 2011)
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible? and easiest.
Info:
MacBook Pro (13-inch Late 2011)
How can I install snow leopard without an optical drive? Could I take it to an apple store to get it installed or can I copy the cd over to a usb pen drive?
Info:
MacBook, Mac OS X (10.5.8)
1. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies View RelatedI want to install Snow Leopard on my MacBook using the optical drive of my Mac Pro. How do I set up the computers to do this?
Info:MacBook Pro, Mac OS X (10.5.5)
My MBP was recently squished in a motorcycle accident and its hard drive and superdrive were destroyed. Is it possible to buy a new hard drive, put it in an external USB 2.0 enclosure, then install OS X on it using the discs that came with my destroyed MBP in a different Mac, then put the hard drive into the squished computer and have it use that hard drive as its startup disk? The motherboard on the squished computer is fine, I just can't install OS X on it because it has a broken superdrive.
View 4 Replies View Related
