I'm using Leopard 10.5.8 on a Macbook Pro.Audio Midi Setup keeps crashing, I'm trying to use Motu midi fast lane, it will not recognize the unit, and anytime I try to click on anything or delete any midi devices in AMS midi, it crashes.I've tried deleting midi drivers, preferences, etc. there's no solutions out there I can find.
View 8 RepliesI can't add any devices in Audio MIDI Setup (Apps, Utilities); in the Aggregate Device Structure list in the Aggregate Device Editor, when I click the + my devices (Built-in Audio 1 and 2, and an M-Audio Duo) briefly show, then disappear; I can't select anything to aggregate.
How do I fix this?
Info:
PowerMac, Mac OS X (10.5.8), Late 2005 G5 PPC
I was messing around with the values and have no idea what the default set up was.. is there a way to reset the values back to default?
I looked everywhere in audio midi setup but see nothing regarding doing a reset to the settings and such.
my son, have accidentally delete the Audio Midi Setup, under /aplications/utilities. There any possibility to restore this appllication without reinstalling the whole OS?
Info:
iMac, Mac OS X (10.7.3)
Is there any way to get Audio Midi Setup to output the 88KHz sampling rate to analog outs? I'm sure the capability is there in Core Audio.
Got a 2.8GHz Core 2 Duo iMac, BTW.
I was tinkering with the settings on the Audio MIDI Setup (in the Utilities folder) on my 21.5" iMac but I cannot remember what the default settings are supposed to be. If I remember correctly, I think the Format should be 44100.0Hz and 2ch-24bit for the Built-in Microphone, Built-in input, and Built-in Output.
View 3 Replies View RelatedI was wondering what the default Audio MIDI Setup values are supposed to be on for the internal speakers on the new 21.5" iMac. This is what I currently have at the moment.
I was hoping someone could do a quick check of their own settings and let me know. Is there any reason to or difference to have the Hz at 44,100 or Bits to 24?
It's literally unusable, sometimes will crash immediately after starting, sometimes after a few minutes....
the crash report is too long to post here, but if anyone can tell me which parts of it to post I can do.
I am not able to boot up. It crashes constantly and some time it boots as far as the screen but no applications whats so ever!
Info:
Mac Pro (Early 2009), Mac OS X (10.6.8)
I am unable to use any of my midi controllers with my new Macbook Pro OS X 10.7.3. Checked on M-Audio's website to see if I needed any drivers for the controllers and it says that all are class compliant.
I tried to open Audio-MIDI Setup I got this message. "Audio MIDI Setup couldn't open the MIDI Server so you can't view or edit your MIDI configurations. If you recently installed a new MIDI driver, try uninstalling it and then open Audio MIDI Setup again. If Audio MIDI Setup works correctly after that, contact the driver's manufacturer for further support." I never downloaded any MIDI drivers FYI. I will also attached a screen shot of the window that popped up that reads the above statement. What should I do next? How can I get my MIDI Setup?
Info:
MacBook, Mac OS X (10.6.3), 2.16 GHz Intel Core 2 Duo 2 GB ram
I am running an optical cable to a Channel Islands outboard DAC that can handle 24/96. I downloaded some 24/96 albums from HDTracks and convertd them using XLD to 24/96 Apple Lossless in iTunes. When I go into my Audio/ MIDI program and try to change the output on the Mac (13" Macbook Pro from 2010) to 24/96, the computer won't accept it. It just bounces the setting back to 24/44. Why won't it accept a 96 kHz sampling rate?
View 1 Replies View RelatedI am running an M-Audio Keystation Pro 88 MIDI controller via USB into Logic Express 7. I use Mac OSX. I'm going straight from the Keystation Pro 88 into the MIDI port of my MacBook Pro. I use a Pre Sonus Firepod as my audio interface (not sure if that's even relevantWhen I begin playing too many notes (especially after pressing the sustain), the piano (Garage Band grand piano .exs) starts to cut out. It sounds like BAD static, as if the MIDI were overloading Logic. I've tried changing the buffer size in audio preferences - it gets no better, only worse when I lower the size (32 being nothing but static).
View 1 Replies View Relatedhaving recorded my Piano playing in Garageband with my oh-so-sexy Apogee Duet, I'm more than please with the quality of the Audio I'm getting.However, I'm wondering if there's a way for me to capture the MIDI at the same time.I'm using a Roland RD700x series Professional stage piano which has a lovely sounding sample in it which is good from an Audio perspective, however I also want to record the MIDI events while I'm capturing the Audio.
View 6 Replies View RelatedMy audio/midi setup says "output not supported". As a result when I plug in my Ipod, or a CD player, into the mic jack (audio input) on my Mac Mini I can't get the audio to play out of the speakers or headphone jack. I can see that the mic is definitely picking up a signal. I have a mac mini (solo intel) 10.4 OSX. Audio output from ITunes or music movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.
I have the "Soundflower" App. installed but turned off.
Does anyone have an idea as to why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source like my Ipod or CD player does not? WHY DOES THE AUDIO/MIDI SETUP SAY "OUTPUT NOT SUPPORTED"?
Hey, I have a 3 GHz 8-core Mac Pro that is about 2 years old, and it seems to get the beachball and forcing a manual shutdown 2-3 times a day. Usually what happens is I am in Final Cut Pro (doesn't really matter WHAT I am doing in it), then I will get the spinning beach ball, can't quit it, 'force quit' menu says it is not responding, so I force quit it. That doesn't work, it's still active in the dock, and if I try to shut down from the menu, everything clears from the desktop like it's about to shut down, but it never does, so I have to shut it down manually. This isn't limited to FCP, it happens in Photoshop, Motion, Finder, Fetch, TM backups etc.
I'm on latest Leopard, Using FCP 7 (did it in 6 too), and I have put in a brand new harddrive and did a clean reinstall of the OS and software, worked fine for a bit, then hit the problem again. I have 9 gigs of RAM, 1 from Apple, 8 from Crucial and the ATI Radeon X1900 XT.
Any suggestions/ideas would be much appreciated!
-sam
Just did update to Safari 5.0 via software update. G4 Dual 867 OSX 10.5.8. Crashes every time I attempt to click on any link. Starts to connect, Beachball-crash. If left idle, without clicking any link, still crashes after less than a minute. Fixed permissions, re-installed with download from Apple site, permissions again..... no difference. Disabled Click to Flash, Ad Blocker...same thing. Just won't work!!!
View 9 Replies View Relatedwhy is safari 4.1.3 crashing constantly? Hopefully they're not trying to encourage us into buying new hardware in this economy.
Info:
PowerMac, Mac OS X (10.4.11), Mail 2.1.3
Ever since updating through software update iTunes to 10.6, it has become almost unusable. It crashes whenever my iPod Touch is connected. I have tried re-installing 10.6 from teh direct download and i have tried to downgrade to 10.5.3 but the system won't let me delete 10.6 as iTunes is now, apparently,a necessary part of the OS.
Info:
Mac mini, Mac OS X (10.7.3)
After Latest update (security update) that came out not so long ago, my safari experience has gone from good to bad. I have crash on me at least twice a day. Anyone else had this? I noticed that it usually happens when I try to compose email on Gmail, when I press compose and enter my friends email press enter to select contact, after that the wheel starts spinning and then you get "Safari quit unexpectedly"
Does anyone else have this issue? Also my startup times started to get slower.
The computer freezes or crashes fairly regularly - sometimes within minutes of being started. I have wiped the hard disk several times and done a clean reinstall of Lion. The computer still crashes - again within minutes of the Finder launching.However, it behaves itself when I boot it into Windows, or if I do a Safe Boot. This is starting to drive me nuts.Here's the latest kernel panic
[code]...
Info:iMac, Mac OS X (10.6.7), Late 2006 20"
I upgraded to 10.1.3 last week and have had nothing but problems. The program crashes continually for a variety of reasons, and while I can eventually get it up and running again, I can't isolate the causes of the crashes. I would like to "revert" to 10.1.2 or 10.1.1. How do I do this? ( I don't have the old program saved).
I have been using FCPX since it came out and FCP (the original) since it was introduced.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), iMac 3.5 GHz Intel i7
I just recently purchased Logic Express 9. I am having difficulty getting the application to play my external MIDI gear.
I selected the appropriate track type (external MIDI), then selected from the library a MIDI device and channel. Logic sees the MIDI devices that I configured through Apple's "�Audio/MIDI interface� app".
This is my setup�
Logic Express is installed on an iMac with 4GB Memory running the latest version of MAC OS 10.x Snow Leopard.
I�m using a Motu Fastlane 2x2 MIDI Interface with Motu�s latest driver installed.
Connected to the Port A input of the Fastlane is a Yamaha P-80 that I am using as a MIDI controller and whose sounds I also want to use. Connected to the two output MIDI ports of the Fastlane are the Yamaha P-80 and a Roland JD990 MIDI synth module. In are correctly routed to outs and vice versa.
The Fastlane is recognized by the MAC computer. Also Logic Express sees the instruments I configured within the Apple�s �Audio/MIDI interface� app.
I am able to use the P-80 keyboard to record MIDI data to Logic Express for either an internal instrument track or an external MIDI track. The soft synths in the internal tracks play with no problem. For an External MIDI track, I see the data in the Piano roll view. When I play the track, no sound comes out but I see the output MIDI data indicated at the bottom of the arrangement window. Also my external MIDI gear�s audio outs are patched into an audio mixer connected to powered monitor speakers. So I would definitely hear the devices if they were receiving MIDI information. The MIDI indicator lights on the external devices are not flashing when Logic is playing back the data.
So obviously I have an output communication issue. Either something is not set properly within the Logic software or the �Audio/MIDI interface� app.
When I open up the �Audio/MIDI interface� app and click on test. I am able to here the tone when I press the keyboard which indicates the Motu Interface is receiving data from the keyboard. However, when I click on the port�s output arrow that is supposed to send a tone to the MIDI instruments, I hear nothing which is consistent with what is happening within Logic.
I know the Motu Fastlane works because I used it for a long time in a Windows based system. I have checked each wire and they check out as well. I have checked and double checked each connection and they are set properly. At this point, I am not sure what to do to correct this problem.
Got the computer a couple days ago and firefox has been crashing a lot. I cleared the history and cache but it still crashes. I did a quick search and it seems like a lot of people are having this issue and there's no solution for it. I was doing something very important and this has been pissing me off. If I don't find a fix I'm going to return this POS as the only web browser I like is Firefox. It's rarely ever given me any problems on windows based computers.
View 9 Replies View RelatedSo I updated Flash to the latest version (MAC 10,1,53,64) from Adobe's website and it's just been constantly crashing.
I uninstalled it then installed it again but to no avail. This only started since updating to the latest version.
Am I the only one here, and what could I do to fix it?
I upgraded to Flash Player 10 a few days ago, and since then both Safari and Firefox are crashing almost every time i visit a page with Flash. I have tried uninstalling flash and reinstalling a developer's copy of version 9 but the crashes continue.
I have read a lot of complaints about similar problems, but have not been able to find a solution or even an explanation as to why it's happening. So I don't know if it's a conflict with the latest version of Leopard (not Snow) or what.
I have Diablo 2, which is built for PPC macs, running through Rosetta. I expected it to be a little bit buggy but seriously it crashes every ten minutes. I figured maybe Rosetta just doesn't work that well until I got Neverwinter Nights 2 for intel mac and encountered the same problem.I have a new 13.3 in macbook pro with upgraded RAM and storage. I definitely meet specs to run these games. Are there any patches or anything that you can think of that I need to install before it will work smoothly?
View 4 Replies View RelatedI've had my iMac, 27" 3.4 Ghz i7 16GB, since Jan 2012. From my excitement of having 2TB, I put all my info from every hard-drive ever owned on it, deleting the originals with the faith that I can trust it till I purchase a 2TB external for the backup.
Two months later it crashed showing the 'grey screen of death' and got stuck with every restart on the welcome-screen (grey apple logo with the circuling loading graphic underneath) only with a new loading bar in below them. The service center claimed the HD crashed, and replaced it (and it took me more than a month going around finding a place that would recover the data before they could replace the HD)
I finally receive it after a long period of living on this earth without a computer (which is problematic for a freelancing graphic designer) and 4 days later crashes again the same exact way, this time the service center claimed it was a software problem but got it fixed.
I've received it yesterday again and I only downloaded trusted software (VLC, DIVx...) and did not dare transfer any old data and stuck to only surfing the net catch up to what life I've been missing out on. It is still crashing but restarting fixing it.
The only thing common with all 11 'crashings' is safari was open, and I really doubt and do hope that it's not the problem.
I made a short movie in iMovie 09. Into the project I imported a song from my iTunes. Then I wanted to fade the music because it lasted longer than the video. So I clicked on the little gear that brings up the clip trimmer. But rather than bring up the clip trimmer the software crashes. Again and again and again.
View 1 Replies View RelatedI've got a Mac Mini at home, but I'm at work now and just have a quick question. I've noticed on the Apple marketing blurb that the Mini audio output will do Line Out as well as headphones. Do you have to switch the output over in Audio/MIDI setup or something?
View 7 Replies View RelatedIs there any way to setup the macbook air so that it can accept audio in? I want to play sound from a game console on the air's speakers using an audio cable.
View 2 Replies View Related