I just got and airport card for my old mac, and want to use it with my network. but it won't work with my network.
Info:
ibook (14.1 LCD 900 mhz 32 vram), Mac OS
X (10.2.x)
I got an old Power Mac G4 Quicksiver 2002 a little while back and I decided to upgrade it a little bit as a pet project. One of the things I did was add an Airport Card so I could get wifi. I read all about 802.11b and WPA2 and all that, and I can't say I understood it all, but what I think I DID get was this: The old airport card cannot connect to a WPA2 network. (right?) I looked at the settings for my router, and it said it was on "WPA2/WPA Mixed Mode." I thought it would work. When I went to connect, it said "WPA Network Needs a Password. I put in my password, and after trying to connect for a little while, it said "Connection timed out." Right now I am connected to the "guest" network, which needed no password. Just to test, I changed the encryption to just WPA, not mixed mode. It stopped my PC from getting wifi, and still didn't work on the Mac. I got it to work by putting NO password, but I really don't want that. Should I try to change it to WEP? I'm not really a tech type of person, especially not with wifi stuff, I'm kind of just stumbling around with Google...
The router is a Linksys E2500 router. AirPort Card Information:Wireless Card Type:AirPort Wireless Card Locale:USA Wireless Card Firmware Version:9.52 Current Wireless Network: {other network name} Wireless Channel:11 Is there any way to connect to the password protected network?
Info:
PowerMac, Mac OS X (10.5.8), Airport Card
I have a Linksys wireless router set up (WRT54G) and my PC desktop and laptop connect fine to the internet with wire and wireless. I installed an airport card in our Power Mac G4 but this cannot detect my wireless network. I have it connected now with an ethernet cable running through the kitchen but want to get rid of the cable.
Is there a compatibility issue with airport and a Linksys wireless network? The Mac recognizes the airport card so I hope that means that it is good. (I got it from eBay used) This Mac is the farthest away from the router so I guess my next try is to see if I can move the router a little bit closer.
I am a newbie to wireless so possibly I have a setting wrong. I did tell the router the mac addresses of all of the computers that I want to connect.
Any advice?
I just bought an AE and replaced my older Linksys with SpeedStep router and for some reason the internet seems slower.I did a speed test to compare with my older system and it's night and day how much slower it is now.
With the Linksys I was getting from 10-15Mbits download.With the AE I'm just tested and got 700KB down Anyone have a clue as what I can do to speed it up?By the way, the AE is connected directly to my desktop by ethernet cable.
I want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies View RelatedI'm lucky if I can get more than five feet away from my Linksys wireless-G router before the Airport Extreme says it's getting no bars. My son also has an Airport Extreme card in his iMac; connection is always iffy, even though his computer is barely four feet from the router.
Do I need a wireless-N router? Is there no backwards compatibility here (e.g. shouldn't a wireless-G router be able to work with wireless-N Airport Extreme cards?)
My neighbor has a blazing 10mb dl wireless connection which I can use. Problem, I'd like to use my Airport Extreme so I can hook up an external HD for use with Time Machine. I'd like to extend the Linksys wireless network with my AE.
Can this be done without needing a wired connection to set the two routers up? I'm hoping I can just connect my AE to the Linksys by way of remote setup.
I was already informed for my Mac Pro that I need an Airport Card. I do have a Wireless USB adapter from my PC that I used by Netgear. Would that connect me wirelessly to my router too?
View 3 Replies View RelatedI have an older MacPro 2006 model. I need a WiFi card for it. I want to know which one to get. Says a 802.11g AirPort Extreme will work. But is that only for Airport routers or can I use it with my Netgear router? Does it matter?
View 1 Replies View RelatedI have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
How long do these routers usually last for? I've had mine for less than a year and I believe it died today.
For the pasta few days I've had to unplug and plug back in to get a connection and today - nothing.
I was getting tired of my belkin54g router that kept dropping connections, so I went and got a new linksys wireless G router. I popped in the CD, followed all the instructions and when I get to the end of the install it says that the configuration was successful, but it could not verify an internet connection.
I figure it's just a hiccup and try to connect with my laptop via airport- success! I get my homepage. But then, I can't get to any other page at all.
It says it can't find the page, but my network connection in system preferences says I'm connected. I go to my desktop which has the hardwire connection and I can't get on the internet at all, but again, my network connection in system preferences says I'm connected- green light, IP address and all.
So I figured I did something wrong and restored the factory settings on the router. Same thing happens again. WTF? This should have been easy. What the hell is wrong with this thing?
It should be noted that if I type in my IP address, the router info comes up immediately. I am also just connecting my modem to my desktop to post now. My internet connection works fine.
I'm new to Macs. I live ~200 yards from my Mom's house. I set her up with a b/g/n router. My Imac picks up the "n" signal just fine. My ps3, which only does b/g, gets no signal. I have an old linksys wrt54g wifi router. I tried plugging it into my imac and setting the imac to internet sharing through ethernet, but it didn't work. Stringing an ethernet cable isn't an option. Am I missing a step in the system preferences for internet sharing? Is there another way to get internet to the ps3? I would rather not buy any new equipment, but I'd spend up to $50.
View 2 Replies View RelatedMy router is a WRT54GS with DD-WRT firmware. It works fine with my old eMac (w/ original airport) and every PC in my house, but not with my new iMac (w/ airport extreme).
At first I thought I might need to power cycle it, but it didn't work. Then I thought it might be conflicting with something, but that wasn't the problem. On a side note, I also have a WRTU54G-TM for VOiP phone. It works with both Macs equally, unlike the GS. The only problem with that one is it will randomly kick my Macs off the network and I end up turning off airport and turning it back on when that happens.
I've a Macbook, PS3 and Linksys ADSL Gateway that can be put in Bridge Mode.Macbook is connected to the internet via 3G USB modem.I was able to tell Macbook to broadcast it's 3G internet connection via AirPort and use it from any other Machine, such as iPhone.
But the problem here, is that I want can't use it in my PS3, because it's the old 20GB model which doesn't have a wireless connectivity.So, I figured out that I might be able to tell Macbook, to share it's 3G internet connection with the Linksys ADSL gateway while it's out in Bridge Mode, and this gateway can send the internet connection to PS3, all using Ethernet cables, as follows:
Macbook --> Linksys ADSL gateway in Bridge Mode --> PS3
But I couldn't make it work.
This is what I've done so far:
1- I plugged the Ethernet cable from Mac to Linksys ADSL gateway
2- I put Linksys ADSL gateway in Bridge Mode
3- I plugged another Ethernet cable from Linksys ADSL gateway to PS3
4- I went to network preferences in Mac and choose the Manual settings
5- I gave the Mac the IP address: 192.168.1.101, Subnetmask: 255.255.255.0, Router: 192.168.1.1 and DNS: 192.168.1.1
6- I went to to PS3 wired settings and gave it IP: 192.168.1.102, same setting with other fields as Mac Ethernet
7- While testing the connection in PS3, the IP check went successfully, and the internet didn't
Note: I do not want to connect Mac to PS3 directly via a croseeover cable because I want to share the internet connection in mac with Xbox 360 as well, which also doesn't have a Wireless connectivity.
i really want a new iMac but can't afford it right now. so i was thinking of getting an older iMac to replace the pc we have now. if i do do this can i use the wireless router that i have now with an iMac G3 or G4?
View 6 Replies View RelatedI have a new unibody macbook pro and print from it using a wireless hp officejet pro 7410 all in one printer. I have a linksys wrt150n router. My pc laptop prints fast from it but the mac prints very slow. The printing actually stops for a while then starts again. It doesn't seem to do this all the time. I can't figure out what would slow it down.
View 2 Replies View RelatedI just bought a Powerbook G4 from my school and the internet is sparatic but it is just at my house. I went to my friends house on Friday and it worked fine and at my school it does to. When I get home it either doesn't connect or goes from four bars to two bars. I have a Macbook and that works fine with the internet. I have tried re setting the router and nothing works. I have a Linksys router.
View 2 Replies View Relatedis there a way that I can lock the linksys Wireless connection from my MBP?
It's been an open connection so users or neighbors around me can use my connection and it seems to be slowing my connection down.
I was looking at how I could secure my connection through my computer?
The Linksys router has a static ip set up to work with the DSL connection and desktop. My macbook pro connects to the router but there is no internet connection! This is pissing me off becuase my mom's cheap Dell notebook connects flawlessly but My $2500 macbook pro doesn't. What do I need to do?
View 5 Replies View RelatedI've always used airport express but lately I've been noticing big drop in speeds when I'm in the upstairs rooms. I do not feel like spending $175 on another apple router, how much trouble is it to go with linksys? How much settings configurations will I be getting myself into?
View 8 Replies View Relatedi want to know how instal Linksys router WRT54G in Mac Os x Snow leopard 1.6
View 4 Replies View Relatedi had my friends white book and when i opened the air port it found the linksys wireless G router i had had connected but it didnt ask me for the password.
I know i set a password for the linksys router because when i log on using my HP it ask me for the password.
Question is what did i do wrong? or are the linksys wireless routers not the best things to use with the mac?
I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.Is a time capsule going to perform the same as a Linksys? Which router is better?
what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme? Is it easy to configure as a Linksys?
Our company is currently running an Apple Time Capsule that has ~40 users wirelessly connecting to it. Now we recently opened up a new office space that will potentially have more than 50 users that need to connect to our network.
Seeing this we then purchased a Linksys WRT610N wireless router so that we can facilitate more than 50 wireless users. My question therefore is: how do we set this up so that the Linksys router connects to the TC so that we will subsequently be connected to the Internet as well as our network - no matter what SSID (TC or Linksys) we're on. I've been bearing about bridge modes and WAN ports but this is new to us so a brief explanation/procedure would be appreciated.
Keep in mind that we would like to keep the TC as our main router with the Linksys connected to that as well as increase the TC limit of the 50-user connectivity limit.
Having issues in setting up my Apple Extreme + Apple Express to my Linksys E2100L ROUTER/NETWORK. I have Green lights on my extreme and express with the Linksys router having the extreme attached to the router (ethernet) with express in another room for my Blu-ray. The Linksys does not see the Extreme or Express. I am using WPA2 Security on the Linksys router. How can I get the Linksys to see the Apple Extreme/ Express? Is there something I need to do on the Linksys end or on the Extreme/Express so that they can talk to each other?
View 4 Replies View RelatedWhen I connect my iMac directly to my cable modem (no router) I get fast speed. But when I connect my laptop through my Linksys WRT54G v5 router the speed drops to about 20-40 kbps.
What is causing this dramatic drop in speed?
WAP Personal security
MAC filtering enabled: Yes
Channel 6
DHCP Enabled: Yes
Autoconfiguration Enabled: Yes
What kind of configuration could help me to get fast speed? I am newbie so don't know to make deep configuratons!
I have a WD Mybook Essential Edition external hard drive that is dedicated to the Mac that I am trying to connect through USB to my Linksys router (WRT 610N).
I have spent no less than 14 hours on the phone with Linksys, can't get through to Western Digital, and Applecare tells me they don't work with PC hardware.
Imac and iphone lost internet connectivity via Linksys wireless router. Ehternet works fine. Keep getting note about "self-assigned" ip. Ideas? I have tried everything I have found and read.
Info:
iMac, Mac OS X (10.6.8)
I installed a WRT400N router via my PC several months back and used an adapter to utilize the Dual Band, Wireless N network. The product worked very well on my PC.
I recently bought a 27" iMac. It easily connected to the 2.4 Ghz Wireless N network. Performance and reliability are both good. However, I cannot see the 5Ghz network listed as an available network. Video streaming is not as good without the 5Ghz network.
Supposedly the 27" iMac (with built in wireless N) can achieve the Dual Band connectivity with Airport Extreme...but I do not want to spend money to replace a perfectly good router.
