I am thinking of upgrading my OS and I am not sure if it's going to work fine, if it's going to be slower... should i stay with this old system 10.4.11 or the 10.6 will improve my computer?
View 6 RepliesThis gets asked a million times on a daily basis I expect, so sorry about that! I've read the upgrade section which is very helpful but I was looking for some recommendations / advice on what HDD&RAM upgrades to buy. I was looking at a seagate momentus (ST9500420ASG) 500GB, 7200 but when I googled the model number, the first thing that came up was a post on the seagate forums regarding incompatibility with the Mac due to the fact this hard drive has a free fall sensor which apparently conflicts with the built in sudden motion sensor. Anyone have any experience on that? I need a drive that will run at 7200rpm so this checked all the boxes for the price but could be out now? I have read the SR 3,1 will take 4GB of ram so I was just looking at the dual 2GB corsair value pack (VS4GSDSKIT667D2).
View 12 Replies View RelatedI'm starting to get the upgrade itch again, with the added "pressure" of my cousin looking for a new laptop that will last 2 years or so. She's looking at the $999 MB, but my Santa Rosa 15" MBP with almost a year's worth of Applecare left seems to have roughly the same specs, and I'd sell it to her for ~$500. I'm still trying to figure out of it's a good idea or not, but I'm leaning ever-so-slightly for the new laptop (15" mid/high, possibly 17"). As they say, always put together a pros and cons list, so here's mine:
Pros:............
MACBOOK Pro Qcore 2.2GHZ Volume Greyed out after 10.7.3 Lion Upgrade + Itunes timeline not running when playing music.
Info:
Mac OS X (10.7.3)
how do i add an additional hard drives to my G5 tower, what type of drive is needed? Is there a max limit to the the drive i can use like the G4's? What type of memory do I need to buy, and lastly, how do i determine what series fo Dual G5 do I have? It seems as if there was a 2003 and a 2005 produced G5 dual 2.0 GHZ model.
View 12 Replies View RelatedAnyone know if I can upgrade my Nvidia GeforceGT120 with the NVIDIA Quadro 4000 per Mac on my MacPro 3,1????? I have a 30inch cinema display and a Wacon Cintiq 21". Could I connect both of them on this card?
View 4 Replies View RelatedI was searching on Ebay and found the follow kit I wanted to see if it would work in my Mini
View 1 Replies View RelatedI have a 2GHz Intel Core 2 Duo. It states the memory as '1 GB 667 MHz DDR2 SDRAM' I want to upgrade it two at least 2GB Ram and came across 'Kingston 2GB DDR2 667MHZ PC2-5300 SODIMM Memory Module' Heres the link [URL] Is this compatible with my macbook also what is the maximum amount or RAM this macbook will take?
View 8 Replies View RelatedQuick question guys, I currently have a Powerbook G4 17 inch with 1.5 Ghz, 2GB of RAM and 80HD. I love it, with the full powered RAM it flies, but, I HATE ITS SIZE, i mean its not that portable. I have at home a Mac Pro so the power im looking for i have it on that machine. I wanna try and change my Powerbook before the new ones arrive because i need PORTABILITY. Is it really a big of a difference? I mean i dont need the "power" of the powerbook because i have the macpro at home. With 2 GB of RAM, will a macbook (lets say the current ones) be really faster and more efficient than my old PB G4? I like the 17 screen but i need portability so bad! what do you guys recommend?
View 2 Replies View RelatedI'm asking good settings for my MacBook 2,2Ghz Core Duo & 4Gb RAM.
How many different speed i should use?
I mean like this,
Quote:
800 mhz at .9V
1200 mhz at .9V
1400 mhz at .9V
1600 mhz at .95
Many different settings, or just 2, etc?
I have a 2.2Ghz Macbook Pro 15" (2007) that suddenly can't get past the startup screen and ends up with a kernel panic and the You need to restart message. Happens 100% of the time now. I had Leopard on it when it started kernel panicking. I managed to boot from an external drive and installed Snow Leopard, but it started okay once or twice, then started having the kernel panics at startup again. Tried SMC reset, but no go.
I then tried going back to Tiger, thinking it might be a problem with the RAM. Tiger actually installed okay, and after it worked okay for a bit (2-3 times, maybe half an hour), I tried to install Leopard again. And got only kernel panics. And I can't install Tiger now either.
It occasionally starts up from an external disk that I use for installs (has Leopard and Snow Leopard on it), but that's not 100%. And I can't even get thru an install now. I started up with it in Firewire Disk mode, wiped the drive and cloned a system from my iMac, but even though it seemed to go okay, when I shut it all down and tried to restart the Macbook Pro, I got another kernel panic. Any ideas? I've switched 3-4 different RAM modules, and I don't think they're ALL bad. But no go. I've changed hard drives too.
Seems weird. I mean, it doesn't seem broken, as it starts up, goes thru the startup screen, seems to pause a bit and, instead of going to login, stops with a kernel panic. I assume it's HARDWARE, not software. But hardware problems are usually the RAM, sometimes the hard disk; and if the MBPro doesn't start up at all, then the logic board is probably fried. So what else can cause these kernel panics? A bad keyboard/trackpad (top case)? Bad PRAM battery?
I've been trying to keep track of how my 2ghz unibody Macbook uses its RAM, and I've been curious as to why after some time it reports that I have as little as 30 MB of free RAM left. It obviously reports that the rest is in use, but the numbers just don't add up to 1.9GB of used up RAM. What is my computer doing that is not being reported, and how do I get it to stop? It has made my machine noticeably slower. I've posted a screen shot to illustrate. It may help to know that I had been a Windows user for years. In Windows we can launch msconfig.exe to manage which programs get to run in the background and at start up, and from there we could decide to shut down programs that check, for example, for RealPlayer updates and other completely unnecessary executables. Can someone give me a run down of what I can safely eliminate from my processes in my Macbook, and therefore keep more RAM free at all times?
View 2 Replies View RelatedAs title, can it be done ? officially it says no, but iv read around some forums where people are saying it has been done in a 2x 2gb config, I ask as architecturally core duo can support 4gb and does on old IBM laptops of the same t2500 processor (2ghz), so im asking if there is anyone that can confirm this for me ?
View 3 Replies View RelatedI just bought coolbook for my two and a half year old White Macbook. What would be the best settings/courses of action to keep my book from overheating and be able to comfortably play streaming vid. on a 23" monitor?
Don't know if that last part really makes a huge difference.
I have a 2.2Ghz Core2Duo BlackBook with 4GB of Ram. When I view large PDF's such as magazines, they are quite choppy when scrolling. If upgrade to the 13" MBP will I see better performance in this area?
View 8 Replies View RelatedI bought my MacbookPro two years ago, september 2007. In june 2009, as I didn't need the computer for some time and the warranty was about to expire (it's "two" years in the European Union, the second isn't covered by Apple, just by the physical store you buy the computer at) I thought I'd take the computer to be checked, because it had had two problems for some time: the Superdrive won't record dvds (it never did) and lately the left fan was very noisy when it turned faster.
It took a lot of time but they replaced the superdrive and the left fan. However after the replacement even though the fan is fine, the superdrive wouldn't still work with dvds, of which I don't care anymore because this is the big problem: Since then, the screen sometimes gets crazy and does as in the video I link to: [URL] It all stops when you move the screen a little. Furthermore sometimes a vertical line appears like half an inch from the left border when moving the screen. It all appears randomly................
Wanting to upgrade my RAM and need to know how much it can handle. HOpefully someone can answer this for me
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
I've had my iPhone 3g 8gb since June 2008 and loved every minute of it. It's been through it all. Even dropped out of a helicopter last week. Ok it was only a fall of around 6ft but still, it sounds epic. I've recently gotten a hold of a Macbook 2.1 2ghz 13" white. It's a late 2006 model and the drive has failed. I planned on replacing the drive myself and apple have kindly sent me the recovery dvds free of charge. Tiger 10.4.11. I read on here about the extended replacement scheme for failed drives on here last night and I think I qualify, however I may still put my own drive in it. Out of my stick just to get things moving along. Once that has been done I plan on upgrading to snow leopard 10.6. I'm curious to find out what drives this machine will support and how much ram it will take and benefit from.
View 3 Replies View Relatedwhat I imagined was a documented 8600GT nVidia issue with my SR MBP (purchased in April 2008 without Apple Care, d-oh), turns out to be a different issue altogether. The display gets distorted and it seems as if the LCD needs a v-sync controller. I have posted a video of it here[URL]. If I move the LCD slightly the distortion will go away. But it inevitably returns after a while. It gets unusable for that period of time. Oddly enough I can go hours without this problem manifesting, and then hours when this problem doesn't go away.
My recourse has been to connect an external monitor to the MBP, and it works great that way. So I am pretty convinced that it is an LCD/Cable issue as well. The Genius seemed to believe it was an LCD issue as well, something about the cable being torn or stretched or something. He quoted an amount ~$650 to get the whole assembly changed. Here's my dilemma: this is my work machine, and I can't afford to have it gone for a few days/week. Is there anything I can try at home before handing it to Apple for repair... like try and reseat the cable... I have opened the MBP in the past to replace the HDD. Should I even bother to get it repaired, if I can't fix it myself, or should I just save the money and get a new MBP?
I've been trying to install xp pro sp2 using boot camp on a macbook 2.2Ghz. It does the initial setup where i reformat the xp partition in fat32 and then when it goes to boot into the xp installer it says: Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll. please re-install a copy of the above file.
View 2 Replies View RelatedMy friend has an Apple MacBook 13.3-inch 2GHz (model number: A1181). When I boot up the computer, the screen is gray and does not proceed to show the Apple logo. The MacBook continues to show the gray screen for quite a while. What can I do to identify some of the problems with this computer? The one caveat: I am in La Habana, Cuba and there is no concept of an Apple Store or Mac support.
I'm using a 2GHz MacBook Pro as a HTPC, but it has developed some major heat issues and is not much longer for this world. I have read some threads regarding overheating issues with Minis and wonder if that is still an issue? I want to replace the laptop with a Mini and don't want to run into the same problems.
View 21 Replies View RelatedI've got MacBook Unibody 2GHz and if my charge ratio is 1 charge/1 day how long my battery will work - is it countable?
View 1 Replies View RelatedWhat kind of hookup do I need to connect a 10gb hard drive from the original dual usb ibook to a 2.2GHz Macbook Pro?
View 2 Replies View RelatedI have a MacBook Pro (13", 2.2GHz, 2GB RAM) that I had previously partitioned. However, 20 GB wasn't enough; I soon outgrew that meager amount. Today, after receiving AoE3, which I couldn't install due to lack of space, I broke - I decided to fix my situation. I tried installing to an external HDD, which didn't work (the only drives I have are all Mac-formatted and can't be seen/read on W7). I then tried WinCloning my partition, deleting the partition, and increasing it. However, I realized I could only add 8 more GB - hardly enough, as 2 of those would be sapped by AoE3 immediately. So I mounted the .winclone, imagescanned, etc. etc. until I finally restored an ancient 80GB FireLite with the .dmg I had just created. Now, however, I can't seem to be able to load my computer off of this drive. Any suggestions, comments, or solutions would be incredibly appreciated.
View 1 Replies View Related1) I have a Macbook 2.2ghz (early 2008) running Leopard 10.5.8 which wont auto update (says it cant connect to internet even though it is - error says A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.) Network diagnostcs says that im connected to the intermet.
2) Also safari and chrome take ages to load pages when every time I open them (around 45 seconds) and then when they are running safari will randomly close and chrome will come up with the aw snap message for random pages (doesnt matter if its trying to loas flash or not).
Iv got Sophos anti virus which is saying theres no malware or viruses, also tried restartiing, re downloading chrome, deleteing my profile from chrome, exporting, deleting and then importing bookmarks and hardwiring the latop to the router.
Info:
MacBook, Mac OS X (10.5.8)
While looking through pricing for upgrading RAM for the new Quad Mac Pro... I thought to myself... Should I spend my money upgrading RAM or should I opt in for 3.2GHz?
From the looks of it, if I were to upgrade RAM I would get OWC 12GB (3x4GB) kit, but for similar price (through my company's program) I could get 3.2GHz cpu with 3x2GB from Apple. At the moment, I'm gearing towards upgrading the processor and 6GB of RAM instead of going 12GB of RAM from OWC. My logic is that since I'm stuck with the processor and can't upgrade in future, I'd better get a solid cpu if I'm going to be using for long term purposes, the ram I can upgrade overtime in future.
My main uses are professional photography and average gaming (I'll be getting the 5870). Now my question to you guys is whether or not I'd be better off with the faster processor and little RAM or all out MORE RAM. If it helps, I use LR3 and PS CS3 as my main photo editing tools.
I have a Dillema! I have found two choices of macbooks, but im not sure which one is the best. A white 2ghz macbook with 4gb ram, 160gb harddrive for 550$ or a Air 1.86 with a superdrive and a mighty mouse for 640$
View 13 Replies View RelatedWill OS 10.5 run on my Dual 2 GHz PPC G5? It has 512 SDRAM.
Information:
G5
Mac OS X (10.3.9)
I have a G5 dual pro 2Ghz (June 2004), 1.5 Gb ram, Leopard
When I press the start button, the dvd drive spins, the startup disk "sparkles" (noise seems normal) but no image appears on screen (black monitor enabled), no start-music. It starts correctly after + / - 15 attempts ignition-extinction.
The various reset (pram, motherboard) have been tempted. "Cleaning" the computer with Onyx (maintenance). Battery voltage Bios = OK. The authorization of repairs were made. Repairing minor problems in head volume repaired (the install cd has booted). Tempted to start with a minimum of devices. The symptoms still persist for 2 to 3 weeks.
I have installed a new hard drive. I've installed Leopard on it.
But the problems stay. My mac starts when he wants...
