I've been trying to install xp pro sp2 using boot camp on a macbook 2.2Ghz. It does the initial setup where i reformat the xp partition in fat32 and then when it goes to boot into the xp installer it says: Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll. please re-install a copy of the above file.
View 2 RepliesI have made an ISO image from my Snow Leopard Install DVD. Here is what shows up in terminal with it mounted (diskutil list)
View 5 Replies View RelatedAnyone know if after a Leopard re-install, my boot camp partition of Windows XP will remain untouched and working like before?
View 2 Replies View RelatedI'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedI used Boot Camp to install Win 7 x64 on a partition, and I got the OS and the drivers to work just fine. (I also have it installed on a Parallels Virutal machine, but I needed the dedicated partition for work.)
My only problem is that when I boot into Win 7, I get a screen that has a cursor flashing for about 2 and a half minutes. After that time, the Windows logo appears and it boots just fine. Is this common, or am I missing something here? It behooves me that it takes around 3 to 3 and a half minutes for Win 7 to boot up after hitting the power button.
Well it tarted when i wanted to install Unbuntu Linux dual booting on my MacBook aluminum. When I set up the install, it wrote 2 partitions of itself. Now i cant remove the partitions. I have check permissions and they are fine. I cant remove the original boot camp partition. I really need help so i can free up some space.
View 1 Replies View RelatedDo I need to order anything else to slip this into my macbook pro? Special mounting brackets or anything? I plan to just swap out my 500 HD. Then plop in this. Then install OSX via superdrive. It should be super fast and hopefully this drive will work well. I'm gonna do a boot camp partition with windows 7 too.
View 8 Replies View RelatedI have just upgraded from a Macbook to a Macbook Pro and just swapped my hard drives. My OSX partition still works perfectly but when i now try and boot to my XP installation the laptop hangs and after about 30s i get the grey screen with a folder with a question mark in it which then blinks/flashes on the screen.
Does anyone know why this has happened???? I have googled it but to no avail. I havent tried to re-install windows yet, I hoping there is a quick fix.
I somehow had a lot of problems when installing Boot Camp into my computer. I finally managed to put my Xp partition on my Alum. Macbook 2.4Ghz. It stated for me to put in my OS X DVD in order to install the necessary drivers for the Xp in order for the internet to work ect. ect.However, when i put in the disk it asks me that i need to update the xp in order to install the rest of the drivers.however, again i have no internet because i do not have the drivers.When i click "Do not update" it saids "Setup cancelled"If i click "Update" then it saids something i do not understand and quits anyway.
View 3 Replies View RelatedIt says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View Relatedhow much should i partition for boot camp. I'm going to install widows xp and i have 52.42 gb left on my hard drive. how much should i partition?
View 7 Replies View RelatedSo, my Boot Camp partition is 150GB and I'd like to easily expand it to 300GB; I've got plenty of space, but I'm wondering if this is possible?
View 4 Replies View RelatedI plan to copy my entire Windows partition from my Mac, delete old partition, make a new Windows partition (~500GB), copy it over onto that partition, and go!Do I have that right? All I need to know is what I should use to do the copying? Or cloning I should say.
View 8 Replies View RelatedAbout a month ago I partitioned my HDD, installed XP and then found no need for it and then erased the partition using boot camp.
I decided to install XP again, so I opened Boot Camp, and partitioned the HDD 69GB for MAC and 70GB for Windows. I clicked partition and then it was partitioning and then I got a message saying to restart my MAC. I held the button down restarted the mac, and then went to boot camp again to join up the partitions, but there is no option for that, I can only partition the HDD again. The thing is that the partition is created I had like 140 free and now I have 60...which means the 70GB is partitioned but nothing is on it.
I partitioned my hard drive to install windows. I rebooted, loaded up the windows disc. And then realized my disc only had one partition. I quit the windows installer without installing windows, went into boot mode and I can only see my bootcamp partition. Is there any way to get my osx partition back?
View 9 Replies View RelatedI've been trying to run boot camp on my black Macbok and have been halted with a Boot camp error message: "The disk cannot be partitioned because some files cannot be moved." It then tells me to back up my disk and boot up from my Leopard DVD, and restore to a "journaled" volume. Now, I've checked, and my HDD is already journaled. I've run "verify disk" and everything seems to be working okay. I've read that sometimes having things related to Parallels on the computer can create this error, and so I've deleted all things Parallells and am still getting the same error. I do, however, have Fusion (though I've deleted that Windows partition.)
I'm hesitant to follow the directions further, for I have nothing to back my disk up to and my Leopard DVD has gone MIA.
Can anybody give me a hand?
I just tried using the boot camp assistant to partition my drive to allow 10GB for Windows. When I clicked the button to start partitioning, it got stuck there for a long time. Eventually I read in forums that this happens sometimes, and the best thing to do is to quit Boot Camp and try it again.
Well, now I have a problem. The 10GB I tried to partition is now completely missing, and the numbers in Disk Utility simply don't add up. Here's what it says:
Capacity: 232.6 GB
Available: 16.1 GB
Used 205.8 GB
This doesn't make sense to me at all. I tried verifying and repairing the disk, and it says everything appears to be okay. I open up boot camp assistant and it acts like I'm starting from scratch, just with 10GB less to work with. Where did these 10GB go that I tried to partition?? It's driving me nuts...
How many gigs is enough for the boot camp partition installing WIN XP?
View 5 Replies View RelatedAfter letting Windows 7 install (with empty, unpartitioned space) it created a 100MB recovery partition (WinRE) which seemed okay. But I can't mount the NTFS partition in OS X now. It fails to recognize it. It sees the unrecognizable WinRE partition and seems to not look any further (that's my guess, at least).
Picture attached from Disk Utility of the space that SHOULD contain TWO separate partitions. One for WinRE, the other an NTFS partition for Windows 7.
This is after I removed my previous windows installation so that I can install a newer version of windows with boot camp 3.0.
This is the error that it gives me while atempting to make a partition from my hard drive: [URL]
I used Boot Camp to setup a partition for installing Windows. I no longer need the partition nor Windows. How can I delete that partition and make it useful for my laptop?
I'd like to have it as just one big hard drive rather than it showing up as 2 separate hard drives. I believe it's called extend the hard drive if I'm correct.
I'm about to install Windows 7 into Boot Camp on my Intel X25-M G2 160GB SSD, so I have about 30GB for Windows 7.
Is it possible Windows 7 can erase data on my partition with OSX on it, say for example if Windows 7 supports TRIM and OSX doesn't could that cause a problem?
I have a MBP with 10.6.1 and I'm trying to set up Win 7 Home using Boot Camp 3.0
View 2 Replies View RelatedI need to use some software for my course at university and typically it's windows only so I created a boot camp partition and after what's weeks and weeks of trouble getting it to work properly, which I decided was down to Windows 7 I deleted the partition and now I want to create another for XP but I get the error:
"The disk cannot be partitioned because some files cannot be moved"
I've been searching Google for a while and had a suggestion that I defrag my HD so I have done but it hasn't helped. I really don't want to wipe my Hard Drive to get this to work.
Summary: Can't mount Win7 partition in OSX. NTFS-3G installed.
So I finally got around to installing Win 7 on my iMac through boot camp. During the install I deleted the partition BC created and reformatted. (I've now learned this is a bad way to do things and I should have just hit 'format' - as I understand that would have left me with the Boot Camp configuration all OK on the Mac end of things). I did the whole delete-the-ati-drivers nonsense and it's installed & running well on Win7. What I can't do now is mount my windows 7 partition in Disk Util so I can write some files to the partition in Snow Leopard (or mount the disk for VM/Parallels). NTFS-3G is installed. Is there a way to get this fixed so that I can accomplish without reinstalling Win7 (again)?
Is it possible to use both Parallels Desktop 5 and Bootcamp on a 32GB partition? In other words, do I need a separate partition for each program or can I have Parallels use the same partition that I allocated for Bootcamp.
I have a 320GB internal drive on my Intel Mac Mini. I tried to make a windows partition using Boot Camp. After I dragged the slider to select the partition size (100GB) and hit 'next' it didn't work. A message came up and basically said it failed. I don't remember what the message was exactly, something like "Verification failed. Some files could not be moved." But now, my Mini thinks it only has a 220GB drive. I open Disk Utility and I tried to reformat but it will only go to 220GB. It seems I lost the other 100GB.
View 5 Replies View RelatedI have a new MPB 15" i5 High-Res. I have VMWare fusion running a vm that I use for work. However, I would like to create a boot camp partition for just gaming.
I am looking to upgrade my hard drive to 500GB. The question is: If I create my boot camp partition now, can I just clone it to the new hard drive, or will I have to start over?
Is it as simple as just copying everything over, or should I just wait a few months until I get a new hard drive?
Just got my first Mac last night, MBA 2.13/128SSD. So far it's been a questionable purchase, the two things I need it to do I cannot do with Mac OS X and Safari. Need to use a digital ID for law school which won't install in safari and can't watch Real Player lectures as I cannot enter log in info. Installed Vista Ultimate using Parallels (have not tried VM Fusion) and it works but the videos lag.
I partition 10G in Boot Camp and tried to install (1st) Vista Ultimate, (2nd) XP, (3rd) XP SP2, (4th) Windows 7b, none of them worked. After I set the partition and select to install, the Mac reboots and then the gray Apple screen appears with an Apple Logo and Folder. I've searched for hours on Google and I can't find a single article that answers my question as to why this is happening and how to avoid. I realize I cannot use XP, but Vista Ultimate and XP SP2 and possibly W7 should have done something..
Is it possible to transfer one PC program I have on my Mac, to the Windows XP Partition I made with BOOTCAMp without having to use an external hard drive or burning a DVD?
Otherwisely written, from XP on my mac, can I browse and import a file that is located on my OS X partition?
