OS X :: New IMac Sleeps - Reverts From Running State
Jul 19, 2009
did a search under "sleep," couldn't find anything. If I don't touch my running iMac (OS 10.5.7) for five minutes or so, it reverts from a running state to some kind of sleep state--desktop replaced by screen saver, all running programs shut down, document I'm working on (using NeoOffice) closes. Computer is brand-new, system preferences/energy saver settings are: both sliders set at "never," no boxes checked, all are off. Damn thing is doing it on its own. Is there anything else I can reset, or is this a gitch?
View 2 Replies
ADVERTISEMENT
Jun 23, 2009
I put my MBP to sleep. Opened the lid back up about an hour later and it was in Deep Sleep mode. I had to press the power button and wait for it to restore settings before I could do anything (greyed out screen, progress bar, etc).
Battery was still at 82%.
Anyone know what's up with this or have this happen with their computer before?
View 6 Replies
View Related
Apr 21, 2012
Ever since I upgraded to Lion, my imac loses its wifi connection when it sleeps.When i wake it up i have to always go up to the wifi icon on top right of screen and wait till it sees my network and then say connect.This never happened in snow leopard, seemed to stay connected.
View 1 Replies
View Related
Nov 20, 2009
My new 21.5" iMac didn't go to sleep automatically when in idle state. I read a lot of posts regarding this issue and tried a few of the possible solutions: resetting the SMC and so on. I finally was able to fix my problem (so far) with the help provided in the following link: [URL]
View 3 Replies
View Related
Jul 29, 2010
So I just want to know weather a solid state hard drive will work in my imac G3.
iMac G3/500
500Mhz G3
700ish mb ram
IDE Hard drive.
View 5 Replies
View Related
Nov 15, 2009
I have a Macbook running Leopard and an iMac running Tiger. I am looking to upgrade Leopard to Snow Leopard and Tiger to Leopard. If I were to purchase Snow Leopard and install it on the Macbook, would I then be able to use the copy of Leopard that came with the Macbook on the iMac? I am not trying to use 2 copies of the same thing on different machines, I just want to put a new os on one machine and move the existing one to another.I am reluctant to purchase the Mac Box Set version of Snow Leopard for the iMac because I do not want or need iLife and iWork.
View 2 Replies
View Related
Aug 4, 2010
I bought a used 80GB for my iBook G4 and loaded my Leopard install disc. I followed the prompts and successfully installed 10.5. I say this because the message with a green check mark was shown at the end of installation. Upon restart, instead of opening the setup/registration process, the system reverted back to the install window. Tried this 3 times with the same result.
View 5 Replies
View Related
Apr 15, 2012
I Set my desktop picture from iPhoto. I shut down and the next time I start up the default galaxy pictures appears. How do I get my selected photo to stay as my desktop image?
Info:
Power PC G5, Mac OS X (10.5.3)
View 8 Replies
View Related
Jul 1, 2012
It´s driving me bananas: Since Lion, Preview now reverts to continous roll every time I open a document. How can I set it to Single Page as default? Cannot find anything in the Preferences.
View 8 Replies
View Related
Jul 2, 2012
I am trying to install OSX Lion onto my Late 2009 iMac 27" computer. I download it from the App Store and install it via the installer.The computer restarts itself and finishes installing, then once it restarts again it boots back into OSX 10.7.4. No errors or problems, just never follows through on install once completed.
View 1 Replies
View Related
Sep 4, 2009
Just installed Snow Leopard (10.6) a few days ago, and most things are working as expected. However, I find that when I customize the Safari (4.03) toolbar, it will remain in that form until I quit. But when I open Safari again, the customized toolbar appears for a few seconds, and then reverts to the default. Very frustrating, as I have to customize it each time I open it in order to use buttons that have vanished. Firefox (ew) is fine, by the way.
View 5 Replies
View Related
Mar 27, 2008
Recently I bought a WD UBB HD to store my music on. I've moved everything over and works great. However, I noticed one night after ripping some of my CDs that they were going back to the default iTunes folder. I'm suspecting that this may be happening if I open iTunes before the HD mounts. Is this true? Is there a way to prevent iTunes from doing this? Or a prompt alerting me that it can't find the USB device and if it should revert to the default. Also, how can I easily move the music over to my USB HD. Can I just do Consolidate Library and not worry about losing anything?
View 3 Replies
View Related
Jun 22, 2012
I have a bunch of mp3 files that I would like to rename the original file name. Itunes only allows me to change metadata, but to fix broken names and keep organized, I need to change the file name. Once I rename the file, it shows the new name, and then upon playing it, it reverts back to the original name. I do not have any locked permissions. I have parallels and tried to rename them on the windows 7 side but same effect. I tried to shut all programs off so the file was not in use. I even tried to export it as a acc file type. I am exhausted looking for a solution, this is why I am using this forum as a last ditch effort.
View 2 Replies
View Related
Jun 27, 2014
I initially set up my MacBrook Pro Retina (late 2013 - Mavericks) with one of the default images for my user account and the same for iMessage.
I've changed me user account avatar to the image I want OK, but I've tried just about everything to permanently change the iMessage avatar - it just keeps defaulting to the original image (an eagle). The image i'm using is saved locally. I've tried all different file formats, including .tif (the same format as the system default images)I've even added the image I want into the HDD>User Library>User Pictures>Animal (same place as the system default images).Â
But, every time I change it, then restart iMessage - it's back to default. System reboot has the same effect, obviously.
View 3 Replies
View Related
May 10, 2009
I recently bought a new Kensington Slimtype keyboard for my PowerMac G4 (dual 867mhz); it's running Leopard and everything other than this is working beautifully. For some reason, whenever it goes to sleep, it turns the brightness down to it's lowest setting - not a huge problem, I just turn it back up. Just wondering if anyone else is having this problem and if they are, how did they rectify it?
View 3 Replies
View Related
Dec 24, 2008
Have a problem with an PowerBook 867 upon turning on it starts with a normal screen for a few seconds and reverts to a dark screen and continues to load as normal except for dark screen if I can find the curser I can change resolutions and the screen will return to normal for a second then revert, have tried everything but nothing works , have tried reseting (button under keyboard, removing battery holding down option and control with R P keys etc) but nothing fixes, I have noticed this has happened to others on this forum but I cannot seem to find the answer can anybody help?
View 2 Replies
View Related
Sep 20, 2009
I have a Mid09 13in MBP.
I noticed that when I put it in sleep, the USB ports still get power. Is there a way to make it so they turn off when it sleeps? I have a cooling plate attached so I have to unplug it every time I sleep it, gets pretty annoying when I forget and I unplug the USB plug and the MBP turns back on. My mouse/keyboard are BT so it wakes it that way, not by USB.
And is it bad for me to have the laptop running with the lid closed? I don't know if the heat would affect the screen or not. I'm currently not doing this because I'm not sure about the effects of the heat on the screen, but I do use a cooling plate, average temps are 120-130*F.
View 5 Replies
View Related
Jan 21, 2010
my eMac is somehow shutting down after going to sleep. I've checked the system preferences under energy saver and there are no schedules set for the machine to turn on or off. It does not happen immediately. It usually happens after a day or so. When I return to wake up the machine, it doesn't respond. I then have to start it from the start button. I don't get any error messages regarding the machine shutting down in the wrong way...just boots up normally.
I've had it for 5 years and this is the first time this is happening.
Has anyone experienced this before?
Can my machine be "infected" and controlled externally?
View 2 Replies
View Related
Sep 3, 2008
I have Leopard and this started yesterday. I put my computer to sleep. I then click my mouse. My mouse becomes active. Nothing else does. I tap the keyboard, press the power button etc. Nothing. To make it work again I have to force shutdown my computer by holding the power button. I cannot currently find my Leopard disk *sigh*.
View 4 Replies
View Related
May 17, 2012
I've seeing a problem with Time Machine with one of my external drives. Here's my setup:MBP 15"OSX 10.7.4Work external drive - Seagate GoFlex, via USBHome external drive - Western Digital Green, via USBÂ
I had been using both home and work drives as Time Machine backups, and things were working fine. I would have to re-designate the appropriate Time Machine backup drive when I changed locations, but everything was working.Â
The problem:When I attach the work drive and point Time Machine to the drive, it works. When I eject the work drive, the Time Machine prefs panel shows "Time Machine - work" in greyed out text as the target drive, reflecting that the drive is not available.When I attach the home drive and point Time Machine to the drive, it works. But when I eject the home drive, the Time Machine prefs panel shows "Macintosh HD" in normal text as the target drive. Worse, I think it actually attempts to back up to the internal drive, because at the next Time Machine backup interval, I get a "The identity of the backup disk has changed" error from Time Machine.Â
I've tried a full reset of Time Machine by deleting the prefs file. I've also tried verifying the home external disk.Â
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.4)
View 7 Replies
View Related
Jul 18, 2005
With my Powerbook, whenever I shut the screen the computer goes to sleep. I was under the impression that (unlike the ibook) this is not supposed to happen? Is there a way to set the powerbook so that it only goes to sleep when i explicitly tell it to (i.e. the option in the Apple menu), so that for example when I shut the screen I can still have it hooked up to external speakers/TV/the network?
View 14 Replies
View Related
Oct 1, 2007
I've set my energy saver preferences to put the display to sleep after 10 mins and the computer to sleep after 15 minutes of inactivity. The display sleeps but the computer always stays on, whether on battery or A/C. What's the problem here?
View 12 Replies
View Related
Feb 2, 2010
If you use a external harddrive, I assume you have to turn it on 24hrs a day? And when the mac sleeps does it still back up on schedule? Can I use a internal drive i.e. bay 2 or 3 etc?
View 6 Replies
View Related
Feb 5, 2012
I have just updated OS X to the newest ver. 10.7.3 and WI-FI conection stops when computer sleeps. Using internet conection through Time Capsule. Someone experienced the same?
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 10, 2012
I just got Lion and a new iMac. It disconnects the wi-fi everytime it goes to sleep. This messes up my vidoe uploads that take more than a few minutes.
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.2), Lion disconnecting from wi-fi
View 6 Replies
View Related
Mar 12, 2012
My macbook pro 13', 2011 recnetly goes into sleep randomly and sometimes the screen blacksout for a second and resumes normal.
Also, there are times that my zoom in feature in safari fails and I had to reopen the application to re-activate it.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Jun 10, 2012
My mid 2009 MBP 13 sleeps immediately when it reaches the login screen if the keyboard fails to illuminate, this is also the case when I have actioned automatic login. I know that this won't happen on any occasion when I see the keyboard illuminate.Â
I have found that if I boot the machine turned upside down the keyboard will almost always illuminate so I won't have the sleep isue. This isn't a practical solution. So I was wondering if anyone could see what was going on based on the logs. This is the most recent failure.Â
kernal log:Â
Jun 10 20:20:30 Kevins-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Jun 10 20:20:30 Kevins-MacBook-Pro kernel[0]: AirPort: Link Up on en1
Jun 10 20:20:30 Kevins-MacBook-Pro kernel[0]: en1: BSSID changed to 1a:87:96:8b:0d:b1
[Code]....
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Aug 28, 2014
I have a new Mac Pro (cylinder) running OSX Mavericks (10.9.4, up to date) which has an issue with power saving and disk I/O.Â
I have my display set to sleep after about 15 minutes of inactivity. I have turned off other power saver features.  When this happens, any jobs I have running stop -- in this case, I was running a "dd" off a USB-mounted SD disk, which I wanted to run over night. Instead, it stopped and I had to restart it.Â
In a non SD-disk based Mac, this isn't a problem. The system just turns the display off and everything else runs.Â
Info:
Mac Pro, OS X Mavericks (10.9)
View 5 Replies
View Related
Dec 24, 2008
Hopefully this isn't a duplicate thread....
After a week of owning this great computer I closed the lid to put it to sleep last night (same as i do every night) and the sleep indicator light dimmed as it would when it goes to sleep. I heard the HD and fan turn off as normal. But as soon as the front light dimmed all the way the apple icon flashed for a split second and the HD started back up and the sleep indicator light stayed brightly lit for about 10-15 seconds. It would then dim again as if it was going to sleep and start this cycle all over again. I didn't realize this until i was laying in bed and heard my HD start up every few seconds.
I tried restarting the computer and nothing changed. Nothing is running in my dock except for finder. I tried putting it to sleep with the lid open and it went to sleep, but then just came back awake within a few seconds. I went to click shutdown and it restarted. I tried to shutdown once more and it just restarted. I did a hard shutdown and then turned it on and tried to put it to sleep and it still was the same....
I'm new to mac so I'm very naive with these still.
Edit: I'd also like to add that my computer now gets very very very hot on the bottom with nothing running. Not nearly as hot as a few days ago. I don't know if it's related.
View 10 Replies
View Related
May 7, 2010
white 2007 macbook has been acting up a lot lately.
- it shuts down when the you close the lid (ie. doesn't sleep)
- every 5 minutes or so it makes a sound as if it was loading a cd/dvd
- now it takes about three attempts to actually turn the computer on (and takes ages to boot up)
- freezes when you try to restart the computer
- we just tried to attach an external harddrive, however it is now not being recognised (just in the past couple of minutes). Nothing is being recognised as being attached to the usb slots.
It is still in Applecare warranty so I will take it into hopefully tomorrow, but just wondering if there is anything I can do now to help it, or what the problem may be. I checked the hard drive in disk utility and the SMART status said 'verified'. The harddrive was replaced in the macbook about two years ago (the first one just died suddenly). Does this mean another HD failure is imminent? (I'm a bit concerned because now we can't back it up since it won't recognised any usb/external harddrive). It's running Leopard 10.5.8 (i hink).
View 1 Replies
View Related
