PowerPC :: EMac Sleeps Then Shuts Down?
Jan 21, 2010
my eMac is somehow shutting down after going to sleep. I've checked the system preferences under energy saver and there are no schedules set for the machine to turn on or off. It does not happen immediately. It usually happens after a day or so. When I return to wake up the machine, it doesn't respond. I then have to start it from the start button. I don't get any error messages regarding the machine shutting down in the wrong way...just boots up normally.
I've had it for 5 years and this is the first time this is happening.
Has anyone experienced this before?
Can my machine be "infected" and controlled externally?
View 2 Replies
ADVERTISEMENT
May 7, 2010
white 2007 macbook has been acting up a lot lately.
- it shuts down when the you close the lid (ie. doesn't sleep)
- every 5 minutes or so it makes a sound as if it was loading a cd/dvd
- now it takes about three attempts to actually turn the computer on (and takes ages to boot up)
- freezes when you try to restart the computer
- we just tried to attach an external harddrive, however it is now not being recognised (just in the past couple of minutes). Nothing is being recognised as being attached to the usb slots.
It is still in Applecare warranty so I will take it into hopefully tomorrow, but just wondering if there is anything I can do now to help it, or what the problem may be. I checked the hard drive in disk utility and the SMART status said 'verified'. The harddrive was replaced in the macbook about two years ago (the first one just died suddenly). Does this mean another HD failure is imminent? (I'm a bit concerned because now we can't back it up since it won't recognised any usb/external harddrive). It's running Leopard 10.5.8 (i hink).
View 1 Replies
View Related
Mar 3, 2012
I do not have a problem with the Internet while I am using the system. However, when I wake the iMac up in the morning, there is no Internet connection.I have to use System Preferences/Network/ and select the network.iMac / Intel / Mac OS X version 10.7.3
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 23, 2009
I put my MBP to sleep. Opened the lid back up about an hour later and it was in Deep Sleep mode. I had to press the power button and wait for it to restore settings before I could do anything (greyed out screen, progress bar, etc).
Battery was still at 82%.
Anyone know what's up with this or have this happen with their computer before?
View 6 Replies
View Related
Jul 18, 2005
With my Powerbook, whenever I shut the screen the computer goes to sleep. I was under the impression that (unlike the ibook) this is not supposed to happen? Is there a way to set the powerbook so that it only goes to sleep when i explicitly tell it to (i.e. the option in the Apple menu), so that for example when I shut the screen I can still have it hooked up to external speakers/TV/the network?
View 14 Replies
View Related
Mar 6, 2007
I need more ram for my eMac 1ghz. It has 512mb and its a little slow during some things. Like IMovie. What type of ram do I need?
View 3 Replies
View Related
Jan 17, 2008
I have a 1.25 ghz eMac with 1 512 stick currently in. What's the max amount of ram that I can put in? And, do I have to look for anything else except for "DDR SDRAM?" Do I need a certain PC number?
View 2 Replies
View Related
May 31, 2010
Im purchasing an eMac in a couple days, but am a little confused about performance. Its a 1 GHZ PowerPC G4 with 256MB of Ram but my last pc blew up (literaly) However the 1GB of RAM that was in still works and will fit in it.
Besides that my Questions pertain to Leopard and Time Machine. I Know that Leopard will run on this Mac, But what about performance? and I heard that the eMacs cant experience the i candy Time Machine offers.
How So? is it true? I really want the Ability to use Time Machine. (Right now i'm just using Genie Timeline for my Windows 7 PC)
View 1 Replies
View Related
Sep 26, 2010
So yeah I need 2 gigs of ram for my eMac 1.42ghz model. I found this but I don't know if there is anywhere to get it for less $.
http://eshop.macsales.com/item/Other...g/2700DDR1024/
View 4 Replies
View Related
Sep 29, 2010
I just got a USB 2.0 emac for nothing that was going to the recycler. The door specs are: 1.25 ghz/256/40GB/Combo "About this mac" shows that it has 512mb RAM installed in one slot, and it is running 10.4.11 Anyways, it seems to be working great so far. I was able to get one stick of 256mb supported RAM from the only other 1.25 ghz machine in the lot - the rest were 700 - 800mhz emacs. Is it OK to mix the 256 with the 512? I've read many places that it is fine, but will it actually boost the speed of apps and things, or should I just leave it as is? I read somewhere that it might slow down the speed between the two RAM capacities. I don't want to spend any money to buy more RAM.
View 5 Replies
View Related
Jul 10, 2007
I have an EMac g4-255mb(just got 2 (256mb chips) never put in yet)-60gig running 10.4 (just got it) and now just got iLife 06) and then I have an 80gig external hard drive. So its like 140gig of room. But I only have a cd burner and dvd drive. Would it be cheaper to install an new internal drive? Or pay more for the external(cause there is no hard installation). What drives would work? And I have a $200 dollar gift card to bestbuy or futureshop.
View 2 Replies
View Related
Nov 26, 2007
I have just got an excellent condition eMac 1.42GHz with the Radeon 9600 Card every transition is so smooth! Smoother than my MacBook!
Everything is standard, but it has an Airport Card in it as well which is cool
However, standard also means only 256MB of DDR3200 Memory.
Tiger is installed and everything updated.
Now I am planning to move this thing to Leopard alongside my MacBook. How much RAM shall I get for it? 512MB or 1GB? (bringing it to 768/1.25 respectively) Also what do I need to look out for brand-wise or type wise?
View 1 Replies
View Related
Nov 28, 2007
i have some questions regarding the Emac..
1.if i get the raster problem that its known for.. will the image display fine on an lcd with the mini vga cable?
2.is an emac with these specs worth $100 shipped..700mhz""512mb""40gig""keyboard""mouse""cd-rw""geforce2mx..
3.how much stronger in old games is the emac compared to an powermac g4 400mhz with a ati rage pro?? with 512mb of ram..
4.i think thats everything
View 2 Replies
View Related
Dec 6, 2007
I am wondering because of the click sound if it may actually be the hard-drive causing the pausing issues (as processor/loading noise on macs is generally silent). I have done all of the disk utility fixes etc. with no positive results; disk utility can not find any problems with the HD.
View 2 Replies
View Related
May 31, 2008
my grandfather's dell laptop is horribly slow. I want to buy him a new computer thats runs faster for his emails/videos. I was looking at the old imacs/emacs on ebay (the 2000-2005) versions.
These comps fit in his budget of approx 100$. I was planning to buy an imac/emac with the following specs
500mhz (or faster) Processor (or 600/700mhz)
256mb (or more) Ram (512mb)
20gb Hard drive (adding external memory)
with the newer os x operating system.
My question will these computers fit his needs? He writes emails, he writes a ton of word documents, and he views videos off youtube and off a media player.
My question is that will these spec'd computers be able to run his needs efficiently?
Are there programs that are similar to the windows (which he is used to)?
Can you run microsoft office on these computers?
If not what would be the recommended specs I should look for?
View 19 Replies
View Related
Sep 10, 2008
I went online and baught the following memory that should be compatible with my eMAC:
512MB 64x64 non-ecc
PC133 133Mhz, 168 pin SDRAM
Unbuffered, Non ECC, Non Registered
7.5ns, 3.3v, CL 3 or CL 2
View 1 Replies
View Related
Dec 25, 2008
My 5yo eMac (1GHz G4 with 1GB of RAM) freezes intermittently. Sometimes the mouse & keyboard lock up, sometimes a semi-opaque grey 'curtain' covers the screen with a message window in the middle telling me to restart.
Sometimes it restarts okay, sometimes it freezes on the Apple/cog-wheel screen, sometimes the grey curtain comes down again, sometimes the desktop loads okay but then lines of code scroll down the left side of the screen and it locks up again. The RAM is third-party stuff but it's been working fine for over 12 months. The freezing occurs under 10.4 and 10.3.
View 4 Replies
View Related
Mar 28, 2009
Trying to get the ps3 eye to work with my emac. OS X 10.5.6. I have downloaded the latest macam and installed it, dragged the component over to the folder, and copied the component into the library/quicktime folder. When I open macam it recognizes that I have the ps3 eye hooked up, but the screen is black. Skype and yahoo also recognize the camera, but the cam monitor screen is black. I really want this to work, and have seen many posts from people with the emac/eye/macam combo and a lot of people have said it works.
View 2 Replies
View Related
Jun 3, 2009
I have an eMac 1GZ with 1GB Ram and G4 PPC will 10.6 work?
View 2 Replies
View Related
Feb 14, 2010
I'm new to the MAC OS, having migrated over from the PC side. I have an eMac running MAC OSX 10.5.8, with 2GB Ram. I'm having a couple of minor glitches that are driving me insane.
1. My computer always starts with EverNote running full screen. On the Dock, I have clicked the Open on Start up to remove the check mark, yet the next time I start up, there it is again. How do I permanently keep it from running at start up?
2. When I close EverNote, I then find a dialog box from ActionFX Log In that states that "To view this page, you must log in to this area on www.actionfx.com 80". I don't have a log in name or password to enetr. How can I stop this script from running?
3. Every time I start the eMac, the SuperDrive door opens and stays open. After the computer finishes, then I have to manually close the door (F12). Is this normal? Can I not open the tray automatically?
OK, was able to finally get Evernote not to run at startup. Just need to know about the SuperDrive door and the running script.
View 8 Replies
View Related
Apr 18, 2007
I have a G4 Power Mac. It's the "digital audio" model that has been upgraded with a 1.2Ghz G4 processor. It works well except for one thing. It shuts down randomly and suddenly. Then after 5 or 10 minutes it turns itself back on, reboots and runs fine. (It is set to re-boot after a power failure.)I suspect what is happing is the power supply is turnning itself off due to some kind of a thermal, self protection switch. The fan seems to work but the PS gets warm.What's the cure? Replace the power supply? If so where to get a new(er) one?
View 1 Replies
View Related
Jul 21, 2007
I hadn't been using sleep mode on my iMac G5 for a while (but it always worked previously to me setting it to "never"), and now yesterday when I turned the sleep mode back on, it has decided it wants to shut down instead of sleep. But it's not a nice shutdown...it just powers itself off, as if it was unplugged. It always boots back up with no problems.
View 1 Replies
View Related
Nov 26, 2007
My Mac has been shutting off by itself with no warning. Sometimes it takes me 5-6 times to get it up and running.
View 9 Replies
View Related
May 24, 2009
i have a powermac g4 that is running fine, but when i click on the apple sign and tell it to go to sleep. It goes into sleep mode and then after that shuts down. Is this normal, I think it might be a setting a have to change but I am unsure because this is my first mac.
View 3 Replies
View Related
Apr 17, 2010
I have a power pc and recently installed some new RAM. All worked fine for a few weeks then the computer randomly shut down. I would turn it back on and it would chime but shut down again before it was finished booting. Thinking this was the new RAM I took it out and rebooted. All was fine. To cut a long story short, I now get this problem with any configuration of old RAM and/or new RAM and to allow the computer to boot successfully I have to at least take out a RAM card and then put it back where it came from...
It seems though the new RAM did trigger something but this now happens no matter what RAM is in there. Also, taking RAM out seems to reset something that makes it start up OK. Any ideas what could could causing this..?
View 2 Replies
View Related
Sep 5, 2010
I know I could use the apple branded stuff so I don't have to use up usb ports but I'm not sure which airport card I need (I'm guessing the airport extreme) and I don't know where the bluetooth card is installed.
Its a 1.42ghz model.
View 5 Replies
View Related
Sep 9, 2010
I bought this refurbished computer, which has Mac OS X 10.5, Leopard PowerPC G4,1.42 GHz, Single Core,512 MB, and 80 GB hard drive. I'm told it can probably use an Airport Express card #A1026. Is this correct? And, I was also told I would have to plug in the antenna. Anything else to get? (I already have a Netgear Router #WGR614)
View 6 Replies
View Related
Dec 5, 2010
I found a great deal on an eMac for the rest of my family to use. Before getting started, I wanted to reinstall Leopard using a disk image. Obviously with an eMac, I am not able to boot and install using a USB flash drive so I used an old iPod with a firewire connection and put the disk image on the iPod. The problem I am having is when I hold down the "option" key on startup, the iPod drive does not show up. Am I doing something wrong? To my understanding, I thought I could use an old iPod to install OSX
View 13 Replies
View Related
Jul 19, 2005
I'm wanting to copy some stuff onto a CD but when I insert the blank CD, it just pops it out (opens up). What gives?
View 8 Replies
View Related
Oct 18, 2006
My old 21" studio monitor used to automatically degauss everytime it was restarted. It also had a 'degauss' button in the software calibrator. You could hear the distinctive degausing sound.There is no 'degauss' button on the emac and I was wondering if it did this automatically on start up and if it doesn't, does it matter.
View 4 Replies
View Related
