I have a crossover cable and I need to connect my imac to my macbook so I can download some of my files on my macbook to my new imac. I know I have to go to Preferences > Networks > and change the ethernet settings but I'm not sure what to do.
View 9 Replies
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
plan to transfer from my Windows PC with the migration tool.I would like to know if it's possible to connect directly my PC to the Mac with an Ethernet cable. Is this considered as the same domestic network?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
My father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
Today when I turned on my computer, it suddenly would not recognize any kind of Internet connection. The Ethernet cable that I use every day now shows up as 'unplugged' even though it is plugged in. I have tried using a different cable, and it still shows up as unplugged. When I try to connect to the Internet wirelessly, there is always a connection timeout and I can't connect. I use a self-assigned IP address and I've never had this problem before. I've also reset my PRAM, but it hasn't worked.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I have an Xbox 360 set up in my bedroom which is at the opposite end of the house. I have an airport extreme base station (new model) connected to my modem and PC (PC is not wireless, thus why i have it connected).... I have the wireless adapter connected to my xbox 360. I can play online with no lag (game: modern warfare 2) when nobody is on the pc but when someone is on the pc I get very noticeable lag. I guess I am fighting to split the connection with the pc. What is my best solution? 1) Have my ISP boost the speed of my modem. I didn't know if this would help by giving us more speed to fight over. 2) Get an Airport express and set it up closer to my bedroom/xbox 360. Will the express still fight for the connection with my pc like my wireless adapter on the 360? 3) Get the airport express and connect it directly to my 360 with an ethernet cable. Will i still be fighting for connection with the pc?
View 3 Replies View Relatedi can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
I live in a shared house and connect both my iMac and PC laptop to the internet via Wifi.
This is fine for the internet, but I'm constantly transferring large volumes of files between my laptop and iMac and it's unbearably slow. I can't connect to the router via ethernet because it's in the living room.
Can I connect my laptop and iMac up with an ethernet or USB cable for fast file transfer?
I'm having a problem using my Built -in Ethernet. I have iMac running Macosx 10.4.11. Everytime I connect a cable it doesn't register it in the Network Panel, It tells me that, 'The cable for Built - in Ethernet is not plugged in.' I have tried a couple of different cables, neither work, but they do work with my Macbook running Macosx 10.5.6. So I don't think there's a problem with the cables. Do I need to configure anything or should they work automatically as they do on the Macbook?
View 1 Replies View RelatedI was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies View RelatedI was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
View 4 Replies View RelatedI have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies View RelatedI just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
Info:
iMac, Mac OS X (10.7.4)
I just bought an airport extreme w/gigabit, and I'm wondering if it's possible to connect an ethernet switch to one of my pro's ethernet ports and have things like my xbox 360 and ps3 run off it, however, my mac pro would be connected to my airport extreme via 802.11n. is that possible?
View 3 Replies View RelatedI have an iMac and a Mac Pro that I frequently connect with a ethernet cable to transfer movies back and forth, When I do this, it messes up the internet connection between the two Macs as well as Windows computers in the house. The internet connection will just stop every few minutes and it takes several clicks to get links to open. If I click on a link once, I just get the spinning wheel and that will keep spinning all night if I let it, same with the Windows computers. Web pages never load up completly, even now there is a blue bar accross the internet address as I am typing this in Safari.
The problem remains for a long long time, even days after I've removed the ethernet cable from the Macs.
The computers are all using WiFi and an AEBS.
I know it worked during migration assistant but does it work all the time?
I need to slurp off the 40+ gig music directory from the old machine as MA didn't get it ... and I figure direct eth-eth would be fastest.
if it does, do I just use network to find the other mac?
I've got a handful of dual layer DVDs of which I'd like 1 copy of each.
To save time I wondered if I could plug my machine to my mate's machine via a network cable, with the original DVD in one mac, a blank in the other, and just hit 'Copy' in Toast?
AFAIK the write machine can only do 8 speed - would the data throughput via the network cable be fast enough for this?
If not, any way of doing it via Firewire?
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies View RelatedLooking for one with a decent design/price ratio.
View 1 Replies View RelatedI know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies View RelatedI have tried searching for a similar question but have not been able to find an exact match. I have a new MacBook, a PS3, a Virgin Mobile USB and an Ethernet cable and I thought putting them all together so I could use the PS3 online would be easy! Could someone please give me a step by step process of what I am meant to be doing.
View 2 Replies View RelatedLike the title asks? How can this be done? I have my iMac and I want to transfer the large library of songs over and ethernet cable connected between the two Macs. I remember seeing this be done. How would I go about doing this?
View 6 Replies View RelatedWe plug cable from the wall into our router, can I do this with the time capsule (extreme) / air port extreme base station?
View 6 Replies View RelatedI live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?
View 2 Replies View RelatedI just bought a new imac and a 1tb time capsule. Will I get faster dl speeds with an ethernet cable plugged into the back of the imac from the time capsule or over wifi.
View 11 Replies View RelatedI've got an issue with my TC setup, I cannot for the life of me get it to see the cable modem and setup the WAN access. If you will pardon me I will cut n paste the lengthy description I left on the apple support list as I feel it is pretty thorough. I think I know my way around networks and dhcp but this setup doesn't yield any logs so I can't troubleshoot! I'm on Virgin Media 20megs and I can't connect using my brand new TC.
Modem: Ambit 256
Time capsule : 1 tB, firmware 7.5
Test router : Netgear WGR614V9
MBP alubook 15 inch late 2008
I tried connecting with the test router and the MBP alubook to the modem and both can pickup the ethernet connection and get a DHCP lease after some coaxing (cold-start the modem first, then cold-start the router/mbp). But I'm having no luck with the airport extreme base station. Hard reset / factory reset / soft reset, any startup order, nothing works. I even left the devices offline for an hour before doing another round of testing. I tried several cables (including a crossover cable) and all configurations work apart from the ones involving the time capsule. Both the modem AND the TC ethernet ports light-up with a green light... but somehow the TC doesn't negociate its DHCP or even basic ethernet connectivity. I see there's a firmware 7.4.2 on the support site for the TC but I'd rather not downgrade the unit.
Here are the console logs from the MBP when it connects to the modem (yes, my MBP is named awesome, because frankly it is):
Originally Posted by System.log when connecting MBP to Modem
29/12/2009 08:54:04 Awesome kernel Ethernet nvenet: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug 796d,0000,0de1,0005,45e1,0000
Originally Posted by Modem status page
Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant
MAC Address : <<redacted to protect the innocents>>
Serial Number : 0014A49B00A5
Boot Code Version : 1.1.2c
Software Version : 2.111.1002
Hardware Version : 1.9
I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?
View 3 Replies View RelatedI have a MacBook Pro with OS X 10.5.6 I connect to the internet with an ethernet cable direct into the wall. When I open the network connection box, it says the ethernet is connected, but it will not load any web pages. Friday I was using it fine and then got off. Came back a bit later and could no longer connect to any pages. I have spoken to my internet provider and they say my settings are fine. I am online on my desktop that connects using the same ethernet cable. I am not having any trouble connecting on it. I went and bought a new ethernet cable, just in case it was the problem
View 7 Replies View RelatedCan I use Ethernet cable while using target mode or do I need to use firewire.
View 1 Replies View RelatedI just took apart my Power Mac g4 and put it back together again , but i cant remember where the ethernet cable plugged into on the motherboard..
Info:
PowerMac, Mac OS X (10.4.11)
