OS X :: Computer Turned Off At The Mid-installation?
Mar 6, 2009
II was updating to some 10.5 software, and got to the point where I had to restart my computer, and while the newly downloaded updates were being installed, Of course, I nudge the power cable and it was just loose enough to come out.My computer turned off mid-installation, and now everytime I reboot I get the "Restart your computer" message.or should I be ceaselessly freaking out and throwing things across my room at high velocities?
I suspect that someone was messing around with my computer. Is there a log that would show what time was the computer turned on or last on etc.? Anything that would back up my theory that someone was using it when i wasn't here?
My wife has an oldish Mac laptop we bought about 7-8 years ago. Everytime we start is up it tries to open MSNMessenger and fails. This hasn't been a problem in the past but today the computer just hangs when trying to open. I get a couple of error messages that disappear almost too quickly to read. One says something about "DevDetectListner" and another something about "Shared library errors.. Carbon". I can't force quit MSNMessenger from the menu strip at the bottom. If I try to use the ctrl open apple esc command it just restarts and the same problem occurs. If I try to open other applications they quit and an error message appears.
My power went out while I was using my iMac today. I was wondering if this could have caused any damage to the computer and if I have to run any utilities etc to investigate?
After several years of working properly, my display suddenly doesn't recognize the mac when starting up. If I turn off the power strip, turn back on and restart, the computer it works fine.
Ok, here's the deal. I just bought a 2.4 15'' MacBook Pro Unibody. I tried to wipe the drive and do a clean install from the system software installation disc that came with the computer. Three tries, failed each time. "Faulty disc" is what it said.
Well, I had to get a project done, so I borrowed same system software installation disc from a friend who bought the exact same computer on the same day. The disc worked fine! Leopard up and runnin'!
But I still called Apple to get a replacement disc. They said they did not recommend using another computer's disc to install. Well I'm thinking "dude, it's the same exact computer! So it must be the same disc?"
Anyone have experience with this? Should I wipe and reinstall AGAIN (NOOO!) after I get my disc. After a few days, it's been working just fine as is.
I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems.
I called applecare today, they weren't any help they told me to reinstall OS X, so I am downloading the updates I need and it tells me to restart my computer, during the installation process the god dam computer freezes, I wait and wait, finally I decide to shut it off, now it keeps going to some kernel panic mode, wtf should I do, I demand a replacement, I've had problems since I got this computer, two logic board replacements, now this?
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation triple boot snow leopard, windows 7, & ubuntu
I have done the following: 1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here: Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
Question: I already have snow leopard installed on my iMac. But can I still do a CLEAN snow leopard installation onto my imac even though snow leopard is already installed?
I tried it just now like twice but I got the spinning wheel of death. It wouldn't go pass the apple sign and spinning wheel.
I shut down before going to bed - 100% certain, no doubts - and I just woke up a few minutes ago. I was on the other side of the room and the Mac powered up?
My buddy saw an article on the net that I showed him about a guy building a "Hackintosh" with all new parts bought from newegg. The article seemed to say that you really should use the same parts as the author did to ensure Snow Leopard compatibility.
My buddy has built MANY a pc. He seems to think that using the directions and software discussed in the article I showed him, that we could pretty much turn ANY home built PC into a Hackintosh with higher performance and less cost.
I'm not here to discuss the legitimacy of his claim, but I would like to know about the hardware / software part?
Sometimes when I try to turn on my power mac G5 don't work. I have already changed the inside battery and also trying to reset the pmu. The only thing that works always is to disconnect the power cord from the back some minutes.
Information: G5 Mac OS X (10.5.1) PowerPC G5 (2.2)
How can i find out when i first turned my mac on, or bought it? I know i turned it on the day i got it. Like, I want to know when i first used it/turned on, to work out exactly how long i've had it.
I remember back, long, long ago in the elementary school days when we had the colored Macs - you turned them on by pressing spacebar. Now I would actually like that with my Mac Pro so that I don't have to bend over to turn it on. Does this option still exist in Mac OS?
For the owners of a uMBP with switchable graphics, how often do you keep your 9600 GT on and what kind of tasks do you use the GPU for? I got the mid-ranged 15" model for the 9600 GT but I can't see myself using it until the release Starcraft II ... and even after I have my desktop with an HD 4870 1GB. Do any of you regret purchasing the model with the 9600 GT?
It started with a USB drive attached to my Airport BaseStation. It was mounted on the desktop but whenever I clicked on it I got the message:'The alias "Maxtor Basic" can't be opened because the original item can't be found.'
I have three options underneath: 1.to delete the alias - which gives me a message: 'The item "Maxtor Basic' can't be moved to the Trash because it can't be deleted.'; 2.to fix the alias (this option doesn't work because if I get the network up on a Finder window all the drives show as available except the one in question, which is greyed out; and 3. to press 'OK' which basically does nothing.
I can eject the icon on the desktop but when I try and connect again I just get another icon that thinks it's an alias (there's no little arrow at the bottom of it, though). I've tried restarting the computer, disconnecting the drives and switching them off, disconnecting all users from the Airport disks page and none of these works. Is it possible the disk itself thinks it's an alias?
Following on from that I've found that some of the files in my other remote disks (attached with FireWire and USB directly to the computer) are doing the same thing. Have I caught a bug? Is this a Snow Leopard issue? Please don't tell me to format any hard drives - I've had to start again so many times recently I'm beginning to consider giving my computer away and living without it!
I was listening a video on my MBP and everything was working fine. I then put my headphones away when I decided to listen to something else so I was what the heck I will just use the speakers but it seems as if they are turned off or something. I keep trying to put the volume up and down and it just comes up with the speaker picture with a circle and line through it. I looked up at the volume in the bar and it is grayed out at fun volume. When I plug in my headphones, the volume turns black again and allows for adjustment.
Did I accidentally turn off my speakers? How do I turn them back on or fix this? They were working totally fine earlier today but now they are not.
On my Mac, especially when copying a lot of files, the "preparing to copy" function before any copying actually takes place is too dang long. Is there any way to disable the "preparing to copy" part so that when I copy anything, it simply starts copying right away?
I don't need to the OS to guess how long the copy will take or to detect if I have enough free space. I just want to the copy to go as soon as I tell it to.
My Mac book pro has turned very laggy.Here's the details:
System Software Overview:System Version: Mac OS X 10.6.8 (10K549) Kernel Version: Darwin 10.8.0 Boot Volume: Jr Machintosh HD Boot Mode: Normal User Name: *********************(personal) Secure Virtual Memory: Enabled 64-bit Kernel and Extensions: No Time since boot: 1 day4:40 Hardware Overview: Model Name: MacBook Pro Model Identifier:
[code]....
The mac was working fine though we heard the fan was broken. It was making a loud noise but worked fine. It use to over-heat very bad. So we decided to get the fan replaced. After 2 days we got it back. Then we tryed playing on it a games. It was laggy. Even after a certain amount of windows it would lag. Then we erased all the junk, and games and tryed to have multiple windows opened. It was bad. The fan didn't make noise but over heated very hot I installed an app and found out it would get so warm to about 219 degrees. We tryed backing it up and then reinstall another mac backup. The same result happened. We tryed again and still no change happend. We tryed all those cleaning programs clean my mac,mackeeper,antivirus,and some others. We erased them off to in the end.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
Last night my macbook air turned off without warning and wouldn't turn back on until I tried again this morning. A few weeks ago I had my battery and logic board replaced and since then it the screen has gone blue for a few seconds and then back to normal a few times, (in case this is related at all). Is there something I should do to make sure this doesn't happen again.
