I had Toast 6, and it worked fine on my Pioneer DVR-112 for the last couple of years.
I just upgraded to Toast 9 Titanium, and it's now rejecting almost all the blank DVD-Rs that I try to record to.
"insert blank media."
But I know the spindle of Verbatim DVD-Rs ARE blank, and good quality.
Going back to Toast 6 works fine. It's just Toast 9 that complains.
how to back up to a CD, from where to back up and how to reload the back up to the hard drive. I'm particularly concerned because it seems that I lost several months of Quicken data from my hard drive.
View 2 Replies View RelatedSo I've got an .iso with AUDIO_TS and VIDEO_TS folders in it. How can I burn the .iso to the DVD so that it will play back on my DVD player?
View 3 Replies View Relatedwhen I go the DVD-Video section I put all the videos I wanted in and the chapters/Menu I wanted etc.
Then it said that I had a mixture of both PAL and NTSC (or however you spell it) which I already knew and was fine with because I wanted to test out what my PS3 could read and could not between files of .mkv, .avi, and .mp4 (ironically it play/read everything but the .mp4).
I have access to many microsoft software packages from my school and some classes require me to have certain software and some is PC only. So obviously i need windows on my mac. So they have Windows 7 Professional.
View 1 Replies View RelatedHow Toast Titanium lets me put a 4.37GB DVD-R in my powerbook G4, then lets me drag like 20 AVI files into the Toast screen, then when I press record it starts encoding and takes forever to encode each one, and then when it's all finished after about 12 hours of encoding... THEN is when it chooses to tell me:
"Not enough space on the DVD-R"and aborts the whole burning process.What in the HELL. Is there any way to have Toast tell you how many AVIs you can put on one DVD-R BEFORE encoding them?
I followed the directions on this website:[IRL] It didn't play in my DVD player because they say to burn it as a data disc. I dont know that if I used the Video TS option that subtitles will still work.
View 1 Replies View Relatedwhen i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 Replies View Relatedwhy Toast Titanium increase file size? I'm trying to put a few episodes of an anime onto a regular DVD disc. Now the file is 563.1MB, but when I put it in Toast in the DVD-Video section, it tells me that 1.99GB on 1 disc.
View 4 Replies View RelatedHaving problems importing audio files from itunes to toast. When imported the file becomes distorted and impossible to listen to . Sound file is fine in itunes but something is happening in the transition.
View 1 Replies View RelatedI am running Toast Titanium v. 8.1 (112). When I burn a DVD from standard files, such as an AVI, it encodes the file and then burns it to disk. The last time I was doing this, I checked the disk space on my HDD before and after burning; the difference was more than 3 GBs. Where does Toast store the files the result from the encoding? Having burned a couple dozen DVDs, I have reason to suspect that there are tens of gigabytes on my hard drive taken up by these encoded files which I will no longer use.
View 1 Replies View RelatedI bought Roxio Toast Titanium 5.0 and downloaded the 5.2.1 update so I could burn some DVDs on my iMac (which is about 2 months old). I set it to record a video_ts file from one of the DVD discs that I've ripped to the hard drive. It records the files and verifies, then it says that the DVD was burned fine. The problem is that when I try it on any DVD player, the disc will not play. It won't play in a stand-alone DVD player, on the iMac nor on my PC. I checked what was burned, and all the files were recorded fine. I've gone through 6 discs with the same result. The only time it recorded anything viewable, was when I set it for "disc copy" and even then, the entire DVD was not recorded because of some error and when I popped it in the player, the portion that was recorded was very pixelated and unwatchable.
I have a .mov file from iMovie that I would like to burn on to a DVD. I am using the latest version of Toast Titanium 8 (which I bought as an update from Toast 6 in the hope that it would fix the problem) but I keep coming up with Error messages.
View 7 Replies View RelatedI am trying to burn a Dual Layer DVD with my new MacBook Pro 15"
i have been using Toast Titanium 10.
( Brand : Memorex DVD +R DL 8x )
It keeps telling me Error after 5 minutes of burning!
What is wrong ?
Here is 2 screen grabs of the Error....... :
I just got a copy of Toast Titanium 10 and want to back up my dvds. The first one i tried said that the disc is copy protected. How can i get around this or can I? I just want to have the files so i can watch them on my computer and store them on my hard drive so i can watch them whenever wherever without the disc.
I wanted to burn a more than two hour long .avi file to a DVD using Toast Titanium 10. However, when I import the file in Toast, it says it's only 58 minutes!
View 3 Replies View RelatedI copied a cd on toast titanium 7 then dropped in a blank to make a copy. To my horror a grey-ish "curtain" descended across the monitor, dimming the screen. After a few seconds a dialog box in several languages came up "You need to restart your computer. Hold down the power button or press restart." I pressed the power button which shut it down. Started it in about 10 minutes and things SEEM fine.
View 3 Replies View RelatedI'm backing up loads of files to DVD, I dragged all the files into Toast and started burning, letting Toast organise the files across multiple DVD. On DVD 11 of 18, there were some drive errors, and Toast crashed.
View 2 Replies View RelatedToast 10 takes a while to open ... it gets to open after a bit ... I then can add files for it to burn on a dual layer DVD .... but when I press the Burn button ... the program ends up sending me continuous messages of it can not burn and repeats this message in a never ending cycle.
View 14 Replies View RelatedI have trashed toast preferences, repaired disk permissions anf have latest QuickTime, still it crashes
Info:
iMac, Mac OS X (10.6.8), 2.4 GHz intel core 2 duo
I had a good-running Powerbook G4 for several years until -- seemingly out of nowhere -- it started rejecting all new, blank CDs (DVDs as well). It still reads disks with data on them, but after a couple of seconds, ejects blank ones. I'm running OS 10.3.9 and do all the software updating.
I've tried re-starting, while holding the option key down, and some other things I picked up on the Internet, but to no avail.
Does anyone have a problem with the mini suddenly rejecting blank DVD's?
Info:
Mac mini, Mac OS X (10.5.8)
I have an iMac5,1 operating OSX 10.4.11. Recently, the reader has started to reject all DVDs after a few seconds. Reading about similar problems, I bought a laser lens cleaner. The problem still remains - the cleaner disc is rejected after a few seconds.
The instructions with the disc are designed for tray input rather than slot input. How can I play the disc from OSX commands? I have tried DVD player but pressing the play button it informs me it does not recognise the disc.
Where can I go from here?
I've had my Macbook Pro (2.4 Ghz Intel Core 2 Duo) for about a year, and it has just started doing something a bit weird. It spits out any disc I put into it. It just churns it around for about 30 seconds and ejects it.I've tried loads of different discs, even the install discs that came with the Macbook.
View 2 Replies View RelatedSuperdrive rejects cd/dvd after 10 secs. How to fix this issue?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I have an Intel iMac and loving it, I bought it last December and Apple mail was just perfect. But recently every day I get an error message saying Yahoo has rejected my password and to re-enter, with an option to save in keychain. The password keeps being rejected but if I go into Yahoo mail on Safari then all seems fine and Apple mail works. I also have an iphone and ipad and these are fine, no password issues at all.
I know there has been a Yahoo update recently and I thought it could be that but then surely the iphone/ipad would also be affected. Equally there has been Lion updates and it all started around that time.
I have tried deleting the password in keychain and starting again, no help. I have deleted the email account and stated again
I use a new imac (recently replaced my old one for iCloud readiness) with 4GB memory, OS 10.7.3, and Mail regularly rejects my icloud password. I have checked the account settings and they are as suggested. I have no problem with my iPad or my iPhone which are both running iOS 5+, and my password works fine everywhere else Apple,
It happens at least once per day, and when I cancel the request for password in a few minutes, without further action on my part, Mail decides it does know my password after all! Not debilitating, but mildly annoying. Could this be an icloud issue? Maybe they need to work on this? Or (gasp) is it just me!
Info:
iMac, Mac OS X (10.7.3), 2.5 GHz Intel Core i5, 4 GB 13333MH
Upgraded to Lion fairly smoothly. All seems to be OK (hate the monochrome finder icons..another stupid change like removing the blue progress bar with SL) Main problem is mail rejects my password on my imac but it works fine on iphone and ipad.
Info:
iMac, Mac OS X (10.7.3)
I have just upgraded my MacbookPro and my MacPro from 10.6 to 10.7.Â
For whatever reason - the MBP works fine and can access all my email accounts, whilst the MP is constantly rejecting the password for iCloud.Â
My Mobileme account was upgraded to iCloud several months ago and has been in daily use on both macs ever since.Â
The only difference in the upgrades is that the MBP upgrade was not a clean install, whereas the MP was installed with a clean hard drive and then all apps/data was transfered over. Disk permissions have been repaired and that has made no difference.Â
Both macs are on the same network, with the same passwords and same account settings.
Info:
Mac Pro (Early 2008), Mac OS X (10.6.6), Xserve Raid 3.5tb, 12tb Infortrend
I am posting this in the Mac Pro forum because I am not seeing this issue on my my Macbook Pro, and therefore think it may be machine-specific. Since upgrading my Mac OS to Lion, the first keystroke is often rejected by the password field on the login screen. The field accepts the keystroke initially, but then "refreshes" and blanks out. This causes a lot of login errors, and I have to retype my password. It only happens when first logging in, never on the second entry of my password. Also, it happens equally often whether logging in on a cold boot, or when logging back in after logging out. Additionally, it doesn't happen every single time, although it happens a lot. My Lion system is an upgrade/install, and I often wonder if a clean install would fix this.
Info:
Mac Pro, Mac OS X (10.7.4), 8 x 2.8 GHz 10 GB RAM, Radeon 4870
