Having problems importing audio files from itunes to toast. When imported the file becomes distorted and impossible to listen to . Sound file is fine in itunes but something is happening in the transition.
View 1 Replieswhen I go the DVD-Video section I put all the videos I wanted in and the chapters/Menu I wanted etc.
Then it said that I had a mixture of both PAL and NTSC (or however you spell it) which I already knew and was fine with because I wanted to test out what my PS3 could read and could not between files of .mkv, .avi, and .mp4 (ironically it play/read everything but the .mp4).
I copied a cd on toast titanium 7 then dropped in a blank to make a copy. To my horror a grey-ish "curtain" descended across the monitor, dimming the screen. After a few seconds a dialog box in several languages came up "You need to restart your computer. Hold down the power button or press restart." I pressed the power button which shut it down. Started it in about 10 minutes and things SEEM fine.
View 3 Replies View RelatedToast 10 takes a while to open ... it gets to open after a bit ... I then can add files for it to burn on a dual layer DVD .... but when I press the Burn button ... the program ends up sending me continuous messages of it can not burn and repeats this message in a never ending cycle.
View 14 Replies View Relatedhow to back up to a CD, from where to back up and how to reload the back up to the hard drive. I'm particularly concerned because it seems that I lost several months of Quicken data from my hard drive.
View 2 Replies View RelatedSo I've got an .iso with AUDIO_TS and VIDEO_TS folders in it. How can I burn the .iso to the DVD so that it will play back on my DVD player?
View 3 Replies View RelatedI followed the directions on this website:[IRL] It didn't play in my DVD player because they say to burn it as a data disc. I dont know that if I used the Video TS option that subtitles will still work.
View 1 Replies View Relatedwhy Toast Titanium increase file size? I'm trying to put a few episodes of an anime onto a regular DVD disc. Now the file is 563.1MB, but when I put it in Toast in the DVD-Video section, it tells me that 1.99GB on 1 disc.
View 4 Replies View RelatedI bought Roxio Toast Titanium 5.0 and downloaded the 5.2.1 update so I could burn some DVDs on my iMac (which is about 2 months old). I set it to record a video_ts file from one of the DVD discs that I've ripped to the hard drive. It records the files and verifies, then it says that the DVD was burned fine. The problem is that when I try it on any DVD player, the disc will not play. It won't play in a stand-alone DVD player, on the iMac nor on my PC. I checked what was burned, and all the files were recorded fine. I've gone through 6 discs with the same result. The only time it recorded anything viewable, was when I set it for "disc copy" and even then, the entire DVD was not recorded because of some error and when I popped it in the player, the portion that was recorded was very pixelated and unwatchable.
I have a .mov file from iMovie that I would like to burn on to a DVD. I am using the latest version of Toast Titanium 8 (which I bought as an update from Toast 6 in the hope that it would fix the problem) but I keep coming up with Error messages.
View 7 Replies View RelatedI am trying to burn a Dual Layer DVD with my new MacBook Pro 15"
i have been using Toast Titanium 10.
( Brand : Memorex DVD +R DL 8x )
It keeps telling me Error after 5 minutes of burning!
What is wrong ?
Here is 2 screen grabs of the Error....... :
I wanted to burn a more than two hour long .avi file to a DVD using Toast Titanium 10. However, when I import the file in Toast, it says it's only 58 minutes!
View 3 Replies View RelatedI'm backing up loads of files to DVD, I dragged all the files into Toast and started burning, letting Toast organise the files across multiple DVD. On DVD 11 of 18, there were some drive errors, and Toast crashed.
View 2 Replies View RelatedUnable to drag and drop from itunes 9.2 to Toast
View 3 Replies View RelatedI had Toast 6, and it worked fine on my Pioneer DVR-112 for the last couple of years.
I just upgraded to Toast 9 Titanium, and it's now rejecting almost all the blank DVD-Rs that I try to record to.
"insert blank media."
But I know the spindle of Verbatim DVD-Rs ARE blank, and good quality.
Going back to Toast 6 works fine. It's just Toast 9 that complains.
I have access to many microsoft software packages from my school and some classes require me to have certain software and some is PC only. So obviously i need windows on my mac. So they have Windows 7 Professional.
View 1 Replies View RelatedHow Toast Titanium lets me put a 4.37GB DVD-R in my powerbook G4, then lets me drag like 20 AVI files into the Toast screen, then when I press record it starts encoding and takes forever to encode each one, and then when it's all finished after about 12 hours of encoding... THEN is when it chooses to tell me:
"Not enough space on the DVD-R"and aborts the whole burning process.What in the HELL. Is there any way to have Toast tell you how many AVIs you can put on one DVD-R BEFORE encoding them?
when i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 Replies View RelatedI am running Toast Titanium v. 8.1 (112). When I burn a DVD from standard files, such as an AVI, it encodes the file and then burns it to disk. The last time I was doing this, I checked the disk space on my HDD before and after burning; the difference was more than 3 GBs. Where does Toast store the files the result from the encoding? Having burned a couple dozen DVDs, I have reason to suspect that there are tens of gigabytes on my hard drive taken up by these encoded files which I will no longer use.
View 1 Replies View RelatedI just got a copy of Toast Titanium 10 and want to back up my dvds. The first one i tried said that the disc is copy protected. How can i get around this or can I? I just want to have the files so i can watch them on my computer and store them on my hard drive so i can watch them whenever wherever without the disc.
I have trashed toast preferences, repaired disk permissions anf have latest QuickTime, still it crashes
Info:
iMac, Mac OS X (10.6.8), 2.4 GHz intel core 2 duo
I just bought this program and I have two questiones so far that I could not find a answer. Anyways the first is every time I open the program it goes threw the setup every time even to the registration again and putting in my keychain password like installing a new program, did I not install it right ? Second I have the program open now and I choose a folder to open were my movies are and I could here the computer serching for the cd in the drive and the little wheel just spins untill I put the cd in the drive, does this program only work with the cd in the drive ?
View 8 Replies View RelatedWhen I insert the DVDs I have burned from Toast 9 Titanium into both of my DVD players they display "no disk inserted." The movies play fine on my computer, though. Any tips? Can I change a setting on Toast 9 to make the DVDs able to play on my (somewhat older) DVD players?
View 5 Replies View RelatedIt is supposed to be the best burning package on mac. But I doubt it. I convert videos to dvd-video format using the absolutely brilliant windows7 application convertxtodvd. Please dont tell me to use a mac application instead of it. I tried it many times, there were always several problems(slow speed, subs etc). This is not the case here.
So, I want these dvd-videos in Video_ts format, to be burned in dvd disks using toast. It is supposed that video_ts folder are a standard folder, no matter the system you use. But toast has a different opinion. When I drag the folder in the dvd-video window, it asks to re-encode the video!!!If I try to burn this video_ts folder in windows machine using 'nero', no problem at all, straight burning! I really cannot understand why this happens.
Another problem I have is that the files I want toast to burn, usually reside to network computer. Is there any way to burn files from a network computer(win) using toast? Can toast access network or not? If not, I have to manually copy files to local disk, several minutes spent for copying gigabytes just to be able to burn them.
I use Toast to burn DVDs. But recently my MBP Superdrive has been refusing to play ball. Whenever I insert a DVD and set up Toast to start the burn, I get:
Sense Key = MEDIUM ERROR
Sense Code = 0x73, 0x0x
I also own an external DVD/CD drive (USB2) which I use with my little ASUS. So, I plugged my external drive into my Mac and tried Toasting again. But:
Sense Key = MEDIUM ERROR
Sense Code = 0x73, 0x03
So, either my Superdrive is fragged, or my external drive is fragged, or both. But the external works fine with my ASUS. And it sounds like a longshot both are fragged with the Mac. Maybe the DVDs I'm trying to burn to are fragged. Or it's a software glitch in Toast. Or....
my Superdrive is fragged for writing. Other posters have had problems with their Superdrives too. BUT my external is fine. So it must be either Toast or the DVDs, right?
I get a message saying "The alias, 'ButterLib' cannot be copied to the destination perhaps because the destination does not support this type of alias"
View 1 Replies View RelatedI have been trying to backup a few .avi files I have onto DVDs and after reading over the forums I have aquired ffmpegx and Toast 8. I place the avi file into ffmpex, encode it with the dvdffmpeg format. But once i burn it with toast, it takes the original wide screen avi file and stretches it to full screen.
I tried re-encoding with the DVD 16:9 setting selected with ffmpeg and it seems to look better in a preview, but when I try and burn the Video_TS folder in Toast it gives me the CSS Encryption disk error, which I do not understand because I'm not copying a copyrighted dvd.
im running mac os x 10.4.6 on a g4 powermac. ive got toast 9, but whenever ive tried to burn a cd, it gives me the following message " sense key = illegal request sense code 0 x 20 invalid command operation code" and then "couldnt set up the track for writing"
although I have been successful in burning a cd from itunes. im guessing its something to do with the settings, but im completelyey stuck.
I am trying to burn a 2GB Quicktime movie to a DVD-R using Toast 8. The file goes through the encoding process then gets stuck on 0% the "preparing" stage. Has anyone had this happen and how did you fix it.
View 1 Replies View RelatedI am getting errors when I attempt to burn my back-up Snow Leopard .dmg in Toast 10 or Disk Utility. Is my superdrive faulty? Here are my error messages.
View 4 Replies View Related