I recently purchased a Radeon 4870 for my Macpro & couldn't figure out a way to make the DVI port my main monitor port. It always mounts my desktop on the mini display port. Is there a way to reverse this?
View 2 RepliesI have an 15" i5 MBP and I run XP on it for some games. I like to run most things on an second monitor but when I play games full screen it defaults to the display on the MBP. How do I mirror my displays or make my second monitor my main display?
View 2 Replies View RelatedOn my 2008 24inch iMac the screen has a problem ( dead pixels ) and I will get it replaced in the future , in the mean time I have a very nice large external monitor connected to the iMac which I use ok, what I am looking for is a way at first when booting up , to be able to see both the iMac's screen and the external monitors screen , then some how shut off / make blank the iMacs screen only leaving the external monitor on ?
View 4 Replies View Relatedim not 100% sure this is the right area to post this in but i have a 15 or so inch hp lcd monitor i wanted to use as a second screen for my imac via vga, so i was wondering if that kvm switch would alow me to have this setup
imac - (vga adapter) - Kvm switch - moniter and surround sound / xbox 360 - (vga adapter)
and the second part is... it says it is powered by bus does that mean it would be powered by the moniters or what?is that a bad idea? will it strain my imac or what.
On my 2008 24inch iMac the screen has a problem ( dead pixels ) and I will get it replaced in the future , in the mean time I have a very nice large external monitor connected to the iMac which I use ok, what I am looking for is a way at first when booting up , to be able to see both the iMac's screen and the external monitors screen, then some how shut off / make blank the iMacs screen only leaving the external monitor on ?
I have this little problem. A few months ago, I install Win7 using Boot Camp, and it's a success. However, now i realize that it's too trouble each time I wanna run a app on Windows (gotta reboot my Mac), so I decide to use Paralle Desktop. So I wanna ask if there is a way to run the windows,which was installed by Boot camp , by Paralle Desktop ? 'cause it's suck to remove win7 from Boot Camp, then reinstall it again.
View 3 Replies View RelatedI had bought an iBook G4 back in July of 2005 and that ended up being my main machine for about a year. I had to switch back to Windows since so much software that I needed only ran on Windows and it just made more sense. Just this past February I replaced that machine since it was having some serious issues and wasn't worth the time or money to troubleshoot. The machine I have now has an Athlon64 x2 4200+, 1GB RAM, a 320GB hard disk, the standard DVD writer, and I installed a GeForce 7600GT 256MB video card in it. The iBook has a 1.2GHz G4, 1.25GB RAM, a 60GB hard disk, and a combo drive. I have a 160GB external hard disk and a DVD writer to hook up to it.
View 6 Replies View Relatedwhen pressing ctrl-option-cmd-8 to switch to white on black (in a low-light environment), everything goes into inverse color mode, including the background desktop picture which sucks if you have a darkish pic which is then superbright.in ubuntu, switching to inverse colors leaves the background pic alone,
View 3 Replies View RelatedI would like to change the computers that my iphone is connected with, but itunes wpn't let me do that without loosing all the data thats on my phone and replacing it with data from the itunes acount, even though there is only 5 songs on it?
View 1 Replies View Relatedwe are trying to hook up our TV as a secondary monitor (for hulu, netflix, etc) but it defaults as the primary monitor. We would like to keep the imac as the primary monitor, and have the TV as a secondary, but cannot figure out how to do it! The only way we can get the imac back to primary status is if we use mirror mode. Once we take it off mirror mode, the TV becomes the primary monitor again, and there appears to be no way of switching it in OSX display preferences.
I've done similar hookups with my laptop, and the TV defaults as the secondary monitor. Why isn't this happening with our iMac? Any ideas?
What is the difference between Parallels Desktop 6 Switch to Mac Edition and Parallels 6?
Is the speed the same for both?
I have a acer 22"Widescreen monitor connected to a G5 Dual thru the DVI port on the ATI Radeon 9600 Pro card. Last night while opening windows &/or scrolling thru info. The monitor would blink and then POOF the windows disappear along with everything else on my desktop including hard drive icons! (the top menu border was still there, I don't remember if the dock survived)
After this happened a couple of times, a couple of restarts and letting it sit for an hour or so, I found that if I touched places on my desktop, randomly, the items that would normally occupy that piece of real estate would become visible. The phenomena hasn't happened today but I'm trying to isolate any problems before they become unfixable.
Information:
G5 PowerMac dual 2GHz
Mac OS X (10.4.10)
I have virtual dj on my system and I am trying to set up a karaoke system. The one problem I am having is when I hook up the vga to the mini dvi converter and the other end to my TV monitor. What is showing on my TV monitor is an echo of what is showing on my computer screen and not what is showing in the video window (which are the words to the song that is playing). I was told that I need to have the desktop extended and that would separate what is showing on the computer screen and the small window with the words.
Info:MacBookPro, Mac OS X (10.6.8)
I have a client with a fairly basic Mac Pro setup. He has the standard ATI 2600 graphics card connected to two 26 inch Samsung LCDs. The main monitor is ok, but the secondary monitor has about one inch of the far right side that does not work. The desktop area itself is squished in, and not chopped off. So far we have replaced the monitor with another, he has about a dozen at his disposal, we have replaced the VGA cable, and we have switched ports on the video card and re arranged the screen locations in system preferences. No matter what configuration we use, the screen on the right has it's image squished and makes many things look distorted.
Just curious if anyone else has had this issue, and what they've done to resolve it. We've contacted Apple care and they originally blamed the monitor, which is why we replaced the screen completely. At some point in the next couple weeks we may have a chance to bring the system to the Apple store, but then we'd need two monitors to demonstrate the problem.
What would require the least processing power of a Mac Pro; a 24 inch monitor run via a DVI cable or the same image accessed via Apple Remote Desktop software and displaying the screen on another Mac? Here is the rest of the story.I am designing a home video surveillance system built around a Mac Pro and SecuritySpy. It will coordinate 12 network cameras (HD quality) and the potential load of the cameras alone will be huge. My goal is to place the Mac Pro in a locked network closet and administer it remotely. I can either go the Apple Remote Desktop route or have the monitor signal sent via an ethernet adapter, but the aim is to tax the CPU the least.So, what are your thoughts?Technological change is like an axe in the hands of a pathological criminal.(Albert Einstein, 1941),
View 3 Replies View RelatedIf I select from the menu bar another available wireless network (one without a password for example) and then switch back to my own wi-fi network, am I still safe?
Did the fact that I connected to another network present any risks?
I did not send any private info during that time, any risks of getting hacked?
Sometimes restarting is not enough: you need to power off your Mac, wait for a little, and power it on again.It could be a script which act like the "schedule" program in system preferences: it would switch off the Mac immediately, the add 1 minute to the current time and switch it on again.
Info:
mac mini, Mac OS X (10.6.4)
I've got an imac with a dead monitor and when i plug in an external monitor to get a display it only shows me the far corner of the desktop and I cannot access the dock or anything else to change settings. I need to change the monitor setting to MIRROR MODE which I believe is located in System Preferences but I cannot see anything with the current limited display.
View 1 Replies View RelatedMy G4 has suddenly stopped powering up. The power button just keeps flashing slowly, but the monitor shows nothing, any suggestions?
Info:
PowerMac
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
I have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
I have a macbook pro from 2007, and I just popped into a tagsale and picked up one 2001 Mac Studio Monitor and a 2001 Fomac Gallery monitor.. So I was hoping to use the monitors with my laptop because the small screen on this laptop is KILLING me, and i'm not yet prepared (financially) to get a powermac.. Paid $10 for both of them..
my issue right now is, the monitor's cable doesnt match the input on my compuer. I need a ACD DVI clip cable.. Now, i looked them up and the price is $100! Call me naive, but i had no clue a connector cable would ever cost that much..
So basically, I am curious if there was a different option to get this to work with my computer OR if there is a place to get a used or "extra" cable
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
i don't know what I did, but for some reason, new windows on firefox opens on my laptop monitor (instead of my 20 inch LCD, I am running dual screens).
1. I am running dual screens, but my EXTERNAL monitor is the primary one (top menu bar is on the external monitor)
2. All applications open by default on my main monitor, except for FIREFOX.
3. I have tried dragging the firefox window back to main monitor, both in spaces view as well as normal view, to no avail.
I picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
View 3 Replies View RelatedI have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies View RelatedAs said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies View Related