Is there a way to use my external monitor as my only monitor when connected to my mbp? Or, can i clone my display, but at separate resolutions? I am able to do this on windows with nvidia software, is there software that allows further customization?
View 3 RepliesI have a 17" G4 powerbook. I would like to get a display for it. Will i have to keep my laptop open if I am using the monitor? Or will I be able to close the laptop and still use the monitor?
View 2 Replies View RelatedI have a G4 powerbook with an LCD that only displays the top 25% of the screen. I've been using an external monitor with it just fine. Today, I reinstalled the OS and ran into a problem. The main OSX startup menu (you know, where it asks for your location, timezone, personal info, etc) is prompting me for information, and I can't see the forms to fill them in! The external monitor defaults to "extended" as opposed to "mirrored", and the forms are embedded, meaning I can't drag them over to my external monitor. Obviously, if I can't fill out these forms and get to the desktop, the laptop is completely useless.
Does anyone know how to force the external monitor to be "mirrored" from startup? Is there a keycommand?
I have been using the latest macbook pro 13.3" since April 2010. Over the last week the monitor suddenly goes completely white and the external monitor goes black. The laptop becomes unresponsive although the programmes opened continue running (e.g a skype voice call would continue without interruption although the monitor is all white).
The only solution at the moment is to press the turn off button for a few seconds then switch the laptop on again. It will then work normally until for no apparent reason this happens again.
I have a 27" i7. I have a 24" DVI Montior hooked up to it via MDP->DVI adaptor. When the 24" Monitor is on, everything is fine. When I turn the monitor off, the magic mouse tracking on the 27" screen stutters. I am not kidding - it took me ages to figure out that to fix I either need to turn the other monitor on OR disconnect the MDP->DVI adaptor.
View 2 Replies View RelatedI picked up a new MacBook yesterday and I noticed a weird issue when coming out of "monitor sleep" mode, not regular sleep mode.
When I move the mouse, the external monitor shows what you see in the picture, kinda like a TV with no signal. The MacBook screen works fine so what I just do is unplug and re-plug in the DVI plug and everything is good again.
My 24 inch Dell monitor worked fine with my M1330 and other computers so I know it's not that. Does anyone have the same issue or maybe give me some light on this?
I have a 22" Dell external monitor on my MBP. I know that I just close the cover to my MBP to shut off the screen. What do I do in those instances that I want to use both screens? There has to be something simpler than restarting the MBP?
View 3 Replies View RelatedAs said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
I've hooked up my Macbook Pro 2009 to my external monitor and everything works. The issue is the mac image on the external monitor is cut off like I can't see the white top bar. Any solutions to fix this issue?
View 1 Replies View RelatedI am running bootcamp with xp on my older non unibody macbook pro. I have it hooked up with a dell monitor, but I want to see things only on the dell monitor and not the macbook one. This works fine booted into OSX, but I can't find a way to do it in windows. Is there a way to disable my laptop monitor?
View 4 Replies View RelatedI have a 24" Imac 2.66 (which i love!), and want to connect my work 13" Dell Laptop to it, so I can use the larger monitor. I can't just use my Mac as I have corporate applications that I need to use. As there is no video-in, I have tried Remote control, but this is too laggy. I hear Elgato eyeTV hybrid may work but I wanted to see if anyone has had success. I have been in email conversations with Elgato but they haven't actually grasped what I want to do yet! It sounds possible as you can connect PS3/Xbox etc through the Hybrid using the supplied s-video/composite cable. So could i just get a vga (pc video out) to s-video (Hybrid) cable to connect through the Hybrid? would the picture on my iMac fill the screen?
View 3 Replies View RelatedCan i use my Imac 27" as a monitor for a laptop?
Info:
iMac
I have an iMac 27-late 2009 (YD03003M5PE) I'm considering buying a macbook air for business travel, but when I'm home would like to use it through my monitor and keyboard. what's the best way to do that? should i connect it directly as a monitor? / keyboard? (hardware connection) can this be done through the video port? alternatively, should i use a remote screen/monitor access of some sort? (software connection)
Info:
iMac, Mac OS X (10.7.3)
I have a Mac Pro and a MacBook Pro. With the Mac Pro I have just the one screen - used to have two, but now just the one as I rarely need it. However, for a job I'm doing at the moment, it would be handy to have the use of two screens. Do you know if it's possible to hook both computers up and use the LapTop screen as a second monitor for my Mac Pro?
Info:
MacBook Pro, Mac OS X (10.6.5)
I have a 30" Dell 3007WFP-HC monitor which I would like to connect to my laptops... I bought a HDMI to DVI cable to connect them.
When using my first laptop: Acer Aspire 6920G with 32-bit Windows 7 Ultimate, it works just fine.
But when trying my second one: Alienware with 64-bit Windows 7 Home Premium (processor Intel Core 2 Duo CPU @ 2.93 GHz), it doesn't work at all...
Wirelessly? Ethernet? USB? Which is easiest to set up? And will speed be an issue?
I have the 17" MBP but need more screen real estate. My mom gave me a $300 dell laptop, so I was hoping to be able to make this work and not have t spring for an additional monitor.
I've tried SynergyKM and can't seem to make it work.
Hardware is not my forte, so please keep it simple.
I just had the laptop on one hand, and was carrying my dog on the other hand and as soon as I turned around it hit a door. Now that's how that scratch got there. I'm so sad because I was so taking care of it! It's under the mini monitor port as you can see. Does anybody know how I can get that scratch off? [URL]
View 16 Replies View RelatedI know this is a little strange but my business partner wants to see if he can get a mac mini, and hook it up through his pc laptop, using it as the monitor.
Is this sort of thing even possible?
He mentioned using a laptop docking station, but I just don't know if its possible.
I received a 27 LED apple/mac monitor --not the 2011/12 version though.I want to use with my work computer--a dell laptop. I can't seem to find the right adaptor to connect the two.I need a dvi port converter that also connects to my vga on my laptop (so need the male end of hte vga since my laptop has the female end).I only found 1 adaptor but it ends with a dvi on a vga. I don't have hdmi on my laptop either--tried that adaptor as well when I couldn't see on the pic when I ordered that it was hdmi not usb). Please help. I have read so many blogs that say it can be done.
Info:
iMac
Is there anyway to connect my Dell Latitude laptop to my 27" iMac to use as a monitor.I have been told that it is only possible to connect mac to mac.
Info:
iMac, Mac OS X (10.7)
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
I have a macbook pro from 2007, and I just popped into a tagsale and picked up one 2001 Mac Studio Monitor and a 2001 Fomac Gallery monitor.. So I was hoping to use the monitors with my laptop because the small screen on this laptop is KILLING me, and i'm not yet prepared (financially) to get a powermac.. Paid $10 for both of them..
my issue right now is, the monitor's cable doesnt match the input on my compuer. I need a ACD DVI clip cable.. Now, i looked them up and the price is $100! Call me naive, but i had no clue a connector cable would ever cost that much..
So basically, I am curious if there was a different option to get this to work with my computer OR if there is a place to get a used or "extra" cable
I have a G5 Quad with an Ati x1900 graphics card running into a 52" Samsung LCD. This was working fine through a dvi-vga adaptor until I switched the monitor resolution from 1920X1080 to 1360X768 which is not supported by the monitor .....blank screen. I plugged another 19" monitor into the other output on the card and both work fine but as soon as I remove the 19" the 52" reverts back to the unsupported mode. I have reset the pram and tried booting in safe mode but that did not help me. From bootup the 52" works fine until just before the login screen, then it switches resolution......blank screen. Would anyone know where these settings would be housed in OS 10.5.1 so I can modify (delete) them?
Information:
G5 Quad
Mac OS X (10.5.1)
i don't know what I did, but for some reason, new windows on firefox opens on my laptop monitor (instead of my 20 inch LCD, I am running dual screens).
1. I am running dual screens, but my EXTERNAL monitor is the primary one (top menu bar is on the external monitor)
2. All applications open by default on my main monitor, except for FIREFOX.
3. I have tried dragging the firefox window back to main monitor, both in spaces view as well as normal view, to no avail.
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies View RelatedIs there a way to have VLC fullscreened on my second monitor (my TV, fyi) while keeping the first monitor active and clickable without unfullscreening it?
View 1 Replies View RelatedI have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
I've got the older white macbook laptop. Just got delivered was my brand new Dell U2410 monitor (drool) and the adapter from apple that converts mini dvi to dvi-d. The monitor is sitting here and i plug it into my mac via the adapter using the dvi cable provided by Dell and the external monitor displays the default apple background and I can move my mouse around on the screen but that's it. How do I get it to work properly? Do I have to use a separate mouse/keyboard or can I use the macbook keyboad?
View 3 Replies View RelatedI know this is a basic question, but for some reason i just can't seem to figure out how to use my 24" Apple cinema display with my 13" MBP as a second screen. I obviously want to use the 24" display as my main screen (when connected to my 13" macbook) but for the life of me I can't seem to figure out how to use my MBP as a secondary iTunes, etc. screen. I typically use my macbook in "clamshell" mode with my 24" display and when I open the lid of the macbook, it's just black as if the computer was asleep but it fails to wake up when I press any buttons on the keyboard . When I unplug the mini display cable, the external monitor goes black and I'm reverted to using just my macbook. I know this can be done. Does anyone have any experience with the 24" Apple cinema display and MBP?
View 8 Replies View RelatedI have my MacBook Air hooked up to a 46" HDTV so that I can play games on the big screen.
Problem is, I notice a slight lag with the mouse when looking around in the game on the big screen.
When I look at the game from my MacBook Air there is no lag with the mouse.
I heard theres a mode called "clamshell" that would fix this but don't know where to find it or enable it.
Info on fixing the lag from the big screen so that games could be playable when watching from the big screen.
