OS X :: Why Mac Desktop Not Recognizing HP Printer
Mar 10, 2010
I have a HP Photosmart C4680 and my mac does not recognize this printer when its plugged in i cant add it to my list of printers. Here is what happened: Initially everything was fine but then for some reason the printer went offline. I turned off the printer unplugged the usb cord. Turned the printer back on let it load and then I re-connected the USB cord & after I did this my mac would recognize the printer and let me add it to the computer under the print & fax settings.
Then the printer went offline again after printing several things and now doing the whole power cycle thing proves to be ineffective. Now I am stuck with a printer that will scan but wont print. How can I get my mac to recognize the printer again? I even tried running the hp installer dmg file but when i get to the 3rd or 4th step it tells me that it cant find a printer.
View 5 Replies
ADVERTISEMENT
Aug 28, 2009
I have a Canon PIXMA iP4200, and I want to use it to print things. I have it plugged in to my PowerBook G4 via USB, but it does not show up. When I "Add Printer" (via Print and Fax preferences, or from any print dialog), I cannot find any option for USB printers (it is not on the Canon IJ Network, it is not a Bluetooth printer, etc. it is plugged directly into the computer)
I know for a fact that I have the driver, and that the printer works, because I have printed using this printer via a network, back before my Mac Mini (into which the printer has always been plugged) died. I have also verified that the USB cable and my USB ports are in working order. And yes, the printer is turned on.
PowerMac G4 Al 1 GHz (Mac OS 10.5.8)
View 7 Replies
View Related
Jan 27, 2009
3 iMacs on network (running Leopard) are not recognizing the printer that is connected to iMac running OS X 10.3.9. Attempted to make some changes in Terminal on the Leopard' macs in regards to the CUPS protocol that the 10.3 version of OS X uses to recognize networked printers but it didnt seem to work.
Note: I did attempt to add --- cupsctl BrowseProtocols='"cups dnssd" --- to the Terminal in accordance with an article on Apples support area but the Terminal responded with "unmatched".
View 2 Replies
View Related
Feb 28, 2010
I have a 13" Macbook that, all of a sudden, cannot find my HP 4280 printer on my network. The Printer is plugged into my 21" iMac, and I'm using a Linksys router. I never had any trouble until recently, and when I open up the "Printers and Faxes" option in System Preferences, my printer isn't listed. When I click "add a printer", it's not there. I have cleared my printers and reset everything, but it hasn't fixed it. I can plug it in via USB and it recognizes it, but it won't find it via airport.
View 2 Replies
View Related
Apr 4, 2012
I upgraded to Snow Leopard and now my printer scanner won't work. It says it cannot recognize my computer. I have installed a few updates available and restarted and it still won't work.
Info:
iMac, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 3, 2012
In grad school renting a furnished apt for the summer, and trying to hook up HP printer (4215) to my Macbook that runs Lion. I've noticed on the discussions there are weird things that go on with HP and Lion, so I followed the advice of another discussion and downloaded the software/drivers noted for HP from the Apple website (software update did not detect).
Now, when I go into system preferences to add the printer, the printer shows up to be added, but forces me to click "add" to add and download the software - which I don't need, having already downloaded it. As other people have mentioned, this results in an error "this software is not currently available?
Is there something stupid I'm missing? It's a USB connection, printer is recognized by the computer, but the automatic software won't download and I'm not sure what to do with the software I DID download to get it to be recognized.
View 6 Replies
View Related
Feb 21, 2008
i have a destop pc running windows xp and a macbook running leopard.
i want to be able to print from my macbook to the printer connected to the desktop pc wirelessly.
anyone know how to do it?
View 7 Replies
View Related
Jun 5, 2012
My Canon photo printer does not recognize files on my desktop?
Canon has "never heard of this problem".
Info:iMac, Mac OS X (10.6.8)
View 9 Replies
View Related
Dec 8, 2009
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 11 Replies
View Related
Jun 2, 2006
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 7 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 3, 2014
On my HP printer Officejet4620 I get an error message "waiting for printer to become available".
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
View 3 Replies
View Related
Oct 29, 2010
Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.
Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?
View 8 Replies
View Related
Nov 8, 2008
I have a iMAC running 10.5.5 and have connected a HP Photosmart C6280 Printer to it via the USB cable. Using Bonjour to connect a XP and a Vista box I get a error saying "ERROR You do not have sufficient access to your computer to connect to the selected printer". I am logged in as the administrator when I do it on the XP or Vista computer and have completed this function on other printer installation before so I know the permissions are there. The software for the printer is loaded on both windows computers.
View 5 Replies
View Related
Feb 16, 2012
What is the best small printer to go with an air book and thunderbolt screen and be a great printer?
Info:
MacBook Air, iOS 5.0.1
View 4 Replies
View Related
Aug 27, 2010
I have a pre-Intel iMac G5, running OS 10.5.8. I have been using an HP LaserJet P3005, connected with a USB2 cable, with no problems. The fuser got "muddy" on the 3005 so I bought a new HP LaserJet P2035n. I've loaded and reloaded the printer software from the provided CD, downloaded the driver software from the HP support website, but the computer doesn't recognize the printer. Called HP support and everything they suggested came up empty; they told me to exchange the printer for a another new one, but I get the same results with it. I'm using the same USB cable I used with the 3005 -- it worked perfectly with that printer as recently as this morning. What's wrong with my iMac or setup?
View 5 Replies
View Related
Mar 7, 2010
this may be sort of a noob question but I was hoping someone could help me out. I have an HP photosmart 8050 printer hooked up to my iMac via USB. The thing is my girlfriend uses my other 2 dell laptops mainly for school while I use my iMac for school. All of these computers are on the same network and are scattered around my house.
So being in school we need to print out a lot of documentation and wanted to just have the printer setup wirelessly. I have a modem w/ the wired/wireless router, and all my computers have internal wireless cards.
View 2 Replies
View Related
Aug 22, 2009
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
View 2 Replies
View Related
Jun 16, 2012
I have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.
View 4 Replies
View Related
Dec 3, 2010
I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
View 2 Replies
View Related
Jan 15, 2010
I got a new HP wireless printer, and the mac suggested setting it up with the USB first, and then disconnecting once it was configured. I did all that.The mac asked to choose a wireless network for the printer, I did. Then the set up CD asked me to add a printer to the qeue from system preferences from the menu- when I clicked my printer was already added. None the less I followed the direction, and then got the message "You already have a similar printer set up, would you like to add this too?" I clicked YES, and then continue.
When I clicked on continue, the set up cd (or mac) told me that I had NOT set up a printer from the Queue (sorry about spelling), even though I had. So when I clicked continue, it told me the printer was not recognized in the wireless network, and now I'm stuck with plugging it in the usb. Please I know this sounds confusing, but why is this happening and what do I do to get the mac to recognize my printer? Apparently its not.My wireless signal is fine, I checked.
View 3 Replies
View Related
Feb 18, 2012
message: Incompatible printer. The Connected printer cannot be used. The Canon LBP3100 is connected via USB and registered on the system detailsI have installed the latest driver from canon.
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 25, 2012
How do I delete an old printer from the Detected Printer List?
Info:
iMac, Mac OS X (10.6.8), early 2009 model imac 20 inch
View 2 Replies
View Related
May 12, 2012
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 8 Replies
View Related
May 14, 2012
How can I add a Epson Stylus SX445w to my Mac Book Pro...This is the second one I've tried and failing miserably..I've installed poken to the help line at Epson and they say it's down to Apple.
Info:
MacBookpro
View 2 Replies
View Related
Jun 5, 2012
I have recently brought Apple MacBook pro 13 inch, iam trying to add my printer Hp laserjet 1018 ,but my macbook identified the printer but DID NOT PRINT. I did not understand why it did not print.
View 1 Replies
View Related
Jun 25, 2012
my macbook pro wont connect to the printer properly. sometimes it connects and it prints for a few days but most of the time it wont work. it says that it is connected but when i try to print it says printer offline. how do i connect it to the prtiner permanently?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Dec 1, 2014
I wish to install again my Epson driver.
I went to the Printer control panel as shown in the attached picture.
I can't figure out what is my IP for the printer, and how to convince my system to show the printer list to enable me to choose it?
[URL]
Info:
MacBook Pro, OS X Yosemite (10.10.1), MBP 13 mid 2010
View 1 Replies
View Related
Apr 28, 2012
Have just added a wireless Canon printer to my local network. Have a shared print queue on a Mac Mini. Have modified the printer options for this printer/queue using CUPS on the Mini.
Identified as a shared printer. Expanded options using CUPS, these options appear in the Mini "print" panel. Can see printer over network on another Mac.Cannot see printer presets, or expanded options on this machine "print" panel.Copies presets .plist from Mini to local machine, now see presets {this is suboptimal - the OS should see the shared presets).
Cannot see epanded print options on local machine. I would expect the expanded options would be visible to
any network machine connected to this printer/queue. What am I missing?
Info:
PowerMac, Mac OS X (10.5.8), plus other Macs
View 4 Replies
View Related
Dec 31, 2010
I'm trying to use a Blue Snowball USB microphone to record in Garage Band (run on Mac OSX Snow Leopard). However, Garageband is not recognizing the Snowball when I go to Preferences.
In addition my mac is not recognizing the snowball when I go under sound within system preferences.
The power light is illuminated on the Snowball. I tried the Blue on my friend's mac computer and it also did not recognize the mic.
View 2 Replies
View Related
