I wish to install again my Epson driver.
I went to the Printer control panel as shown in the attached picture.
I can't figure out what is my IP for the printer, and how to convince my system to show the printer list to enable me to choose it?
[URL]
Info:
MacBook Pro, OS X Yosemite (10.10.1), MBP 13 mid 2010
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
I am trying to add a printer to my computer.
I go to the Print and Scan utility, click the '+', and the Add Printer box pops up. My Default option is empty, grayed out, I can't manually add anything to it.
My other options are Fax, IP, and Windows. Neither one of my wireless printers are detected on any of these headings. My "Print Sharing" option is enabled. The printer is online, I can print just fine from my PC. I also tried connecting the printer to my Mac via USB and still it wasn't detected. All my software is updated, including drivers.
I tried calling Apple and they want me to pay $50 to have my computer print. I have spent four hours online with no success. I am about 5 seconds away from throwing my MacBook Air out the window, or ripping my hair out.
Info:
MacBook Air, Mac OS X (10.7.4)
What is the best small printer to go with an air book and thunderbolt screen and be a great printer?
Info:
MacBook Air, iOS 5.0.1
on the nearly empty sheet there is one line printed. It says: "Unsupported Personality: PCL"
how to eliminate this unnecessary print?
Info:
iMac, Mac OS X (10.7.3), HP Laserjet 1010
I have a deskjet 3050a that is installed on my 10.6.8 macbook pro, which is up-to-date on it's software.
I can ping the printer from my router, so I know it is on the network. I cannot, however, ping it from my mac. Sometimes, I can reboot the printer and then I'll see it from my mac and, other times, that doesn't work.
I've tried editing the hosts file, but that didn't work. I've tried setting the IP on the printer to a static, but that didn't work
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
How can I add a Epson Stylus SX445w to my Mac Book Pro...This is the second one I've tried and failing miserably..I've installed poken to the help line at Epson and they say it's down to Apple.
Info:
MacBookpro
my macbook pro wont connect to the printer properly. sometimes it connects and it prints for a few days but most of the time it wont work. it says that it is connected but when i try to print it says printer offline. how do i connect it to the prtiner permanently?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
I installed the cannon driver for my cannon mp550. My sister didn't even have to to anything it just automatically found hers?
Info:
MacBook Air (11-inch, Early 2014), OS X Mavericks (10.9.3)
No updated driver from apple. The all in one wireless lexmark (X6570) printer is a few years old. I had a working driver with snow leopard which carried over to lion,but I deleted it trying to go wireless (mistake).
Info:
MacBook Pro, Mac OS X (10.7.3)
My Macbook can't locate my HP printer on my network consistently.
Info:
macbook, Mac OS X (10.6.2)
I have a MacBook Pro on 10.8.5 and I cannot find or connect the MX870 printer wirelessly. It used to connect perfectly and now doesn't at all.
I have an iMac on 10.9.3 that runs the MX870 without issue.
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
On my HP printer Officejet4620 I get an error message "waiting for printer to become available".
Info:
Imac with Intel Core Duo, Mac OS X (10.4.11), 512 MB memory 160GB
Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.
Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?
I have a iMAC running 10.5.5 and have connected a HP Photosmart C6280 Printer to it via the USB cable. Using Bonjour to connect a XP and a Vista box I get a error saying "ERROR You do not have sufficient access to your computer to connect to the selected printer". I am logged in as the administrator when I do it on the XP or Vista computer and have completed this function on other printer installation before so I know the permissions are there. The software for the printer is loaded on both windows computers.
View 5 Replies View RelatedI have a pre-Intel iMac G5, running OS 10.5.8. I have been using an HP LaserJet P3005, connected with a USB2 cable, with no problems. The fuser got "muddy" on the 3005 so I bought a new HP LaserJet P2035n. I've loaded and reloaded the printer software from the provided CD, downloaded the driver software from the HP support website, but the computer doesn't recognize the printer. Called HP support and everything they suggested came up empty; they told me to exchange the printer for a another new one, but I get the same results with it. I'm using the same USB cable I used with the 3005 -- it worked perfectly with that printer as recently as this morning. What's wrong with my iMac or setup?
View 5 Replies View Relatedthis may be sort of a noob question but I was hoping someone could help me out. I have an HP photosmart 8050 printer hooked up to my iMac via USB. The thing is my girlfriend uses my other 2 dell laptops mainly for school while I use my iMac for school. All of these computers are on the same network and are scattered around my house.
So being in school we need to print out a lot of documentation and wanted to just have the printer setup wirelessly. I have a modem w/ the wired/wireless router, and all my computers have internal wireless cards.
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
I have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.
I can't find my HP PSC 1350 printer. The printer is connected to Windows Vista sadly. Two of my Windows XP computers can connect and print. I have even downloaded an HP setup assistant and that can't even find it.
btw im new to the mac world, trying to figure out the basics.
I have been given an iMac g3 with osx 10.4.11 installed and airport card. My son will have this as his first computer. It is up and running and surfing the net using the airport connected to our home network. I have searched the forums and tried all the results I could find but am still unable to print from the iMac to my network printer.
iMac G3 10.4.11 osx slot loaded, airport wireless. Officejet all in one 6310 usb to pc running Vista. I have tried all the usual SAMBA and LPD methods listed going for generic printer, but get error 256 using printer utility, and NT_status_no_memory when using samba with all the settings, when trying LPD the printer service just stops.
I use LPD://user:password@workgroup/server/sharename and same for smb. I have set up a seperate account for the mac on the vista pc with password and started lpd service I've also edited the registry for lmcompatibility, printer sharing is enabled and both machines have the same workgroup name (WORKGROUP).
I got a new HP wireless printer, and the mac suggested setting it up with the USB first, and then disconnecting once it was configured. I did all that.The mac asked to choose a wireless network for the printer, I did. Then the set up CD asked me to add a printer to the qeue from system preferences from the menu- when I clicked my printer was already added. None the less I followed the direction, and then got the message "You already have a similar printer set up, would you like to add this too?" I clicked YES, and then continue.
When I clicked on continue, the set up cd (or mac) told me that I had NOT set up a printer from the Queue (sorry about spelling), even though I had. So when I clicked continue, it told me the printer was not recognized in the wireless network, and now I'm stuck with plugging it in the usb. Please I know this sounds confusing, but why is this happening and what do I do to get the mac to recognize my printer? Apparently its not.My wireless signal is fine, I checked.
message: Incompatible printer. The Connected printer cannot be used. The Canon LBP3100 is connected via USB and registered on the system detailsI have installed the latest driver from canon.
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
How do I delete an old printer from the Detected Printer List?
Info:
iMac, Mac OS X (10.6.8), early 2009 model imac 20 inch
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I have recently brought Apple MacBook pro 13 inch, iam trying to add my printer Hp laserjet 1018 ,but my macbook identified the printer but DID NOT PRINT. I did not understand why it did not print.
View 1 Replies View RelatedI had to put a new hard drive in my Mac G4. I lost my print driver and can't find it. I use Asante Talk to connect to my Apple Laserwriter 4/600.
View 1 Replies View RelatedI've been trying all day to get my new wireless printer to find my wireless network. No joy.
I have an airport extreme router connected to an AT&T 2WIRE modem. The guys that installed the AT&T stuff recently said I normally wouldn't need the airport extreme because the 2WIRE serves as both modem and router, however it does not work with an airport express, which I have in another room to boost the signal. So when the printer looks for the (SSID) network, it sees my apple network, which is what my macbook and windows vista laptops also see and connect to. After that, I'm entering the wireless network key from the 2WIRE.
