OS X :: White / Blank Screen With Sound On ITunes Video Downloads
Aug 2, 2009
I'm having a rather annoying problem playing videos on itunes. Instead of the video, I'm getting a white screen with sound. In full screen mode, I'm getting a blank screen, also with sound but no controls pop up when I move the mouse around. I'm getting this with episodes of Lost I downloaded from the itunes store (as well as previews on the itunes store), as well as the "Jake and Amir" podcast. Curiously, if I open the Jake and Amir podcast in VLC it runs fine, but if I try the Lost episodes in VLC they come out without sound OR video. The Onion podcast, on the other hand, works just fine in itunes. This problem, I think, only goes back to when I got the latest version of Itunes.
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick, that I can see best behind an all white screen, i.e. a blank page of a word processing document.
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick,that I can see best behind an all white screen, i.e. a blank page of a word processing document.
Anyone seen anything like this before. I can actually see part of it right on the white of the page I am typing in this thread.
When I go to front row, all my video content plays sound, but the picture is just a pure white screen (shows the slider to move chapters, etc., but the screen is just white).
Any ideas for solutions? I did google searches, etc., to no avail. I have a MP (not early 08), which I upgraded the graphics card to a 2600XT, and it's running Leopard.
From time to time, now, on my recently-acquired 2008 2.8x8 Mac Pro, it'll boot to a blank white screen, no Apple logo, no spinning indicator. It does not have Boot Camp set up. A single press of the power button will turn it off and it'll boot fine the immediately subsequent try. The console doesn't show anything.
For some reason, a friend of mine is having issues with her new iMac (one generation back). Here is what she emailed me about the situation:
Here�s what happens in greater detail. I quit or force quit all open applications. I press the ON/OFF button until the screen goes black. I wait several minutes and press the same button ON. I get the Apple cord sound and a blank white screen. The Apple icon does not come on; nothing happens. That�s when I close it down again and disconnect it from the back and reconnect it (a few seconds). Then I press the O/F button and the Apple cord sound AND the Apple icon come back, the system revs back up. All all is well � except for the ball coming back...
A small (about 1 inch square) blank, white box has appeared at top left-hand corner of my screen. Nothing seems to shift or remove it - cursor doesn't seem to recognise or register on it. I first noticed it soon after I'd had to re-start the Mac (it failed to 'fire up' as usual the other morning), but I can't remember exactly what I was doing when I first saw it.
All of a sudden my 13" MacBook pro (2011) takes a long time to shut down. And on boot up it remains on a blank white screen where all I can do is move the mouse around. It may or may not boot to the desktop. At the moment I'm leaving it on sleep and it performs fine, apps load like normal but I'm afraid to shut it down incase it won't boot up again. The shut down takes so long that I need to hold the power button to shut it down. I've read around that it could be hardware failure but like I said I have it on sleep and it performs fine when I wake it.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
My MacBook Air just started messing up yesterday and I'm not sure why? When I turn the power on, it will make the startup sound and go to the log in screen as it should but after my password is entered the screen goes white and it never loads.
My problem is taht when i installed windows xp, which im thinking is SP1 cuz its so old, i think i partioned mac os x and now when i try to turn on my MBP all that happens is a white screen. and if i press option key no hardrives or systems show up even Mac OS X please im stuck:/. Also windows xp or mac os x is not loading up so im stuck on a white blank screen
a blank white screen appears whens i start the imac up, it doesnt seem to respond to anything i press on the keypad or the mouse. it just simply stays on a white screen and wont let me log in or anything. when i turn the imac on it just pops up straight away without the loading sign and bluescreen that appears after the white.
My MacBook Pro is turning on to startup screen with apple icon and loading signal, but then after a few minutes the screen just turns white. What is wrong?
I turn on my computer and all i get is a blank white screen. No logo, no loading symbol, just a blank screen; though the start-up music still plays. I have tried almost all the solutions.
I just got my IMac. I have no clue what happened it was working fine. In the morning when I turned it on it just went blank turned on to a white screen with an apple on it and nothing else is happening.
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
My screen had black and white vertical lines pop up over the entire screen then went blank and now at a restart the password then loading spinning circle happens then I get a blank white screen.It's a 27 in Intel iMac that is about 2011/12 purchase
I've got an 800Mhz iBook G4 (640MB RAM, latest update for Tiger 10.4) which has worked without a hitch for the last 2 years. Suddenly it has started going dead while in use - the screen goes completely blank (although the backlights are still on) and all sounds cease. It doesn't matter if the machine is idle, or playing World of Warcraft, or encoding a DVD in DVD Studio Pro. It is completely random. The only way to get out of it is to hold down the power button to force it to shut down. Powering up is also becoming difficult - 9 times out of 10 the machine boots but I get no startup sound. Instead the screen stays dark and the fan goes on full throttle, and nothing happens. Sometimes I can force it to shut down by holding down the power button, sometimes I need to take the battery out. When the machine does boot and I get back into OS X, sometimes it displays a message saying my clock and time/date are set before 2001 and I may have problems.
I understand this message comes up if you reset the power management unit, but on checking the time/date it is set correct. I have tried resetting the power management unit, but it doesn't make any difference. I have run the hardware test CD, and all items pass on the extended test. The iBook's battery is almost dead - this I know! But would that make any difference? With the time/date error that sometimes comes up on restart, it's almost like the internal battery that stores data like the time has run flat. Is this charged by the big battery? I haven't booted into open firmware, but I've read I can run the reset -nvram and reset-all commands from there (not sure what they do). It's not hardware, as the hardware test CD works. It doesn't seem to be a software error (although I haven't reinstalled OS X). Has my RAM gone bad or become unseated?
First of all, I have a Unibody MBP 2.4 GHz from October 2008. Today my sound card died. Or half died. My left speaker doesn't work anymore, and the sound card must have fried my headphones too, because the right speaker in those also doesn't work anymore (with any ipod / computer).
But this is only one of the many problems I've had with my logic board. I've had my logic board replaced twice for graphical issues, and now I'm experiencing even more issues. Every once in a while, the top 1/4 of my screen flickers black for a couple milliseconds. This happens on only the 9400. But, when I'm playing games using the 9600, it will overheat and my screen will go black and the sound will start looping. To fix this, I have to manually adjust the fan speed before I start playing. And finally, I've had some USB problems too. Whenever I plug in a USB device into my computer, it doesn't get recognized, get powered on. NOTHING happens. I have to wiggle it around for a couple minutes to find the "sweet spot" where it will connect.
All of my problems have been with the logic board.I'm going into the apple store tomorrow. I'm pissed. I shouldn't need to get my logic board replaced every couple months.
Any suggestions? Should I ask for a new MBP all together? Should I just keep putting up with this BS? Anybody have any permanent solutions to any of the problems I've mentioned?
I tried to install Windows 8.1 using bootcamp assistant on Yosemite. After installing Windows 8.1, it asked me to restart.
When I restarted it stuck on blank screen. I've heard the startup noise but nothing happened. I tried many startup key combinations such as; Command(Alt), cmd+R,cmd+V,T, but the screen is always blank. Although the screen light is, on the screen is totally blank.
I did resetting SMC, and also I did cmd+alt+P+R (I've heard 4 times startup sound) but the screen is always blank. Nothing happens. I can only shut down by pressing the power button for 4 seconds. As a result when I power on, I hear the sound but nothing happens. Nothing on the screen.   Â
What I did before was: The system is a brand new mac. I bought it 1 week ago.
1- I tried to install windows 8.1 using bootcamp. But failed. Because windows installer gave me an error that windows can not be installed on GPT partition.(I have also MacBook Air and MacMini with bootcamp Windows 8.1 working fine.) 2- Then I rebooted using Alt key then booted to MacOSX and deleted the windows part and many combinations. But failed. The error was always the same GPT error. 3- I reinstalled Yosemite tried all the steps but failed with the same error (GPT error) 4- We had another same macbook pro. And we could install windows 8.1 easily. 5- I compared the two machines in windows setup. The problematic mac had first partition labelled EFI. 6- Then after a few hours. I tried to install again. And saw that the EFI label was gone!. But I don't know how this is happened. 7- I was happy and started to install windows. After installing the system gone!!.
Info: MacBook Pro with Retina display, OS X Yosemite (10.10), 13' 256GB SSD 8GB RAM i5 (Mid 2014)
On my iMovie, mov video files doesn't work it shows up as a white screen also on my quicktime. But mpg files works prefectly on my imovie. Can someone help me find a codec or a mov a mpg converter for Mac OS X 10.3.9?
Does the new Quicktime capture on screen video with sound? If not is there a way to do it? Other good reliable programs out there that do what I am looking for?
When selecting the iTunes Artwork screensaver and running "Test", the screen is Black or Blank (no Artwork). I left it running for over and hour and the artwork never appeared. I have tons of artwork in my iTunes library and checked it after launching iTunes. The preview window for the screensaver is also blank and does *not* say "Your iTunes library does not contain any songs with artwork".
- Consolidating / Rebuilding Library from iTunes. Then trying the screensaverÂ
- Launching iTunes while holding "Option" key. Selecting the correct ~/Music/iTunes library again, then trying the screensaverÂ
- Deleting the ~/iTunes/Album Artwork folder. Launching iTunes again. Downloading some album art. Trying the screensaver.Â
