I'm trying to connect my windows pc to my mac through vnc viewer on windows. I follow these steps to enable vnc sharing from the mac side: [URL] But it doesnt work, vnc viewer on windows just closes the window when trying to connect... Do I need another third part application (vnc server) for the mac to connect from a windows computer? mac to mac vnc works great with these settings.
View 1 RepliesI've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
i was wondering if it is possible to connect wireless mighty mouse to Windows XP! If so, how?
View 15 Replies View RelatedI have just got my mac and I enabled smb but I can't connect to windows computer. Does anybody know how to do it I called apple they didn't; know.
View 2 Replies View RelatedI just moved into a new apartment, set up new internet and router, but I have trouble accessing a lot of websites, like [URL]. All my friends are using PCs, and I'm the only one on Mac. None of their computers have trouble going to the same sites, but I'm stuck watching a blank screen.
I researched around, but I cannot find a solution to this. I've tried pinging websites, running the command line to flush the DNS cache, but nothing has worked. Is there some sort of system preference I have to set on my Mac, such as lowering security features, to access the sites I use the most?
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I have a Macbook Pro 13" (Mid-2009) running Windows 7 32-bit via Bootcamp. I was trying to figure out how to get my Motorola S805 bluetooth headphones to work in Windows 7, and the difficult part was that Windows 7 doesn't include the necessary A2DP bluetooth profile in the stock bluetooth stack. You're supposed to get it from your bluetooth adapter vendor, which apple doesn't seem to include in the Bootcamp drivers.The solution was to install the Broadcom/Widcomm bluetooth driver version 6.3.0.3800. I found a number of websites with this driver, but I wasn't sure if they were reputable or not. I eventually found the driver I needed from Gateway, which I was willing to try
View 4 Replies View RelatedI have got a problem with the connection between my Macbook Unibody Late 2008 and my Sony TV. I've bousht an adapter (MiniDispport->HDMI), which is connected to the HDMI wire that's plugged into the TV. The point is that when i go to HDMI 1 into the menu, macbook's screen goes blue for few seconds, but then goes back as it was, and i haven't got any image on the TV.
View 7 Replies View RelatedMy Internet connection is working fine, I can connect to adium, download a torrent, use an FTP client etc without problems. When I use Safari or any other browser I can't connect to any sites. I us usually get an error stating that it can't establish a connection or find the server. I'm using a Time Capsule as my router, I've tried resetting my modem, the Time Capsule, restarting the computer. The internet is fine, I'm connecting to adium etc, but the browser won't connect, when it does I can use the browser for a hour or 5 minutes, it's random. I've ride resetting the DHCP numerous times, the majority of the time it does nothing.
View 16 Replies View RelatedMy airport doesn't seem to be working. It's completely connected--I even ran through the diagnostics and it said nothing can be done for it--but it won't pull up a Safari page, let me log into AIM, or check my Mail. It works fine when I plug an ethernet into it, and I've tried restarting my computer multiple times, and I reset the DHCP, too, and nothing.
View 1 Replies View Relatedi just installed windows 7 on my mac last night over my vista partition, but now my avg firewall was disabled to i had to reinstall avg, got that fixed, but my next problem is vmware fusion. it just doesnt work, it boots into windows 7 but then i get the blue error screen saying something like windows has shutdown due to a blah blah blah...anyway i need this fixed right away, do u guys know how to fix it or know any alternatives besides parallels?
View 2 Replies View RelatedI have had problems with my macbook for a while now. When I am at school I need to log on a 802.1x wlan with a certificate. For some reason I decided to change the trust settings, and after I did that my internet has become very unreliable. It is like the airport turns on and off all the time. I use iStat and when I look at the Network in and out values they keep changing from 0 to normal speed every second.
Today I tried to delete the certificates from school, and I think I made it work. I added two DNS numbers and a domain search address. But when I got home and started Firefox, it wouldnt work. If I went on a site, it would work, but if I clicked something, it would say that I wasnt connected.
I checked the network settings, and it said approved instead of connected. I deleted the DNS settings, and now I think its working again at home. But now it probably wont work at school. Does anyone know what to do? Has anyone had this problem?
On April 2nd I downloaded mail from my ISP mail server using Mac Mail. A couple of days later while downloading mail in Mac Mail all I get are the circles with the triangle. Safari will not connect. I worked with my ISP yesterday, and they think I have a bad cable(s). Today I connected a known good Ethernet cable from the computer to the DSL modem with the same results of no connection with Safari. I am therefore thinking something is wrong with the built in Ethernet. In an iMac PPC G4 flat screen, is Ethernet on a card or part of a chip? Any idea on the cost to fix the problem? There is an Apple Store close to where I live. Once all the cables are reconnected Wi-Fi does work. This leads me to believe that the problem is in the computer, and not the cables.
View 1 Replies View RelatedDevice: macbook pro, 13-inch mid 2010 model
OS X 10.9.2
Earlier today, this computer stopped connecting to the internet. I am still able to connect to the local wireless and check the status of my airport extreme (current model). But, all attempts to reach the internet fail. I've tested other devices (iPad, iPhone, and my mac mini) and they are all still using the wireless to reach the internet without issue. I even tried plugging the ethernet cable from the wall directly into my macbook (no modem in use, just wall to airport extreme, as we're in an apartment building), but that does not work for the macbook pro either. I reviewed the network settings for the macbook pro and the mac mini, and noticed that the DNS settings are different between the two - the macbook pro is listing an entry for Search Domains - westell.com, but my mini is not showing any search domains in that setting. Additionally, the ipv4 addresses are fairly different between the 2 computers, as well as the subnet mask (255.255.255.0 on the macbook, 255.255.252.0 on the mini) and router settings (192.168.1.1 for the macbook, 192.168.80.1 for the mini). Not sure what I can do to force/clear these settings on the macbook or anything else to check.
I recently put XP on my mac with bootcamp. When I put the OSX install disk in, install all of the drivers up to the sound driver and then restarts without finishing. I have no sound probably because of this. Any ideas?
View 1 Replies View RelatedI need some help. just recently got a new macbook pro. 15 inch 2.66 i7 model. i partitioned my harddrive and installed windows with bootcamp... windows loads just fine, only issue is my keyboard and track pad are not working. i've tried plugging in keyboards and a mouse via usb and they still dont work. i've started in safe mode and still nothing. has anyone had this issue before? know any way to fix it?
View 6 Replies View RelatedIt took me a lOOONG time but I finally bit the bullet and bought a macbook. So far so good, I will be giving it a memory upgrade in a few weeks but right now I could use some serious help.
The computer won't connect to my Netgear WGR614 wifi router. I called Apple, they said the airport works and I may need a router firmware update. I updated the Netgear router. I have tried using the WEP, the WPA and also tried with the router set to zero security. The macbook still won't connect. Here is the kicker, my old windows based laptop and my wifes newer netbook picked up the new upgrade without issue.
The macbook (I loaded all the macbook updates with hardwire) will go through the network diagnostics and end up being unable solve the problem.
I got my motherboard replaced a few months back and i am now just noticing that my backlit keyboard is no longer working. Is there away for me to connect it as i no longer have warranty.
View 1 Replies View RelatedI have been scouring google for hours to this solution and cannot find a solution.
I have an Airport Express acting as the router, connected to the ethernet jack in my dorm.
Now, my NAT is OPEN.
But I cannot connect to my friends online.
DOES ANYONE have a working configuration????
2.8ghz Al iMac running Leopard 10.5.2 I can see my windows PC under "shared", but I cannot connect to it. After entering the username and password used on the PC, I get "connection failed". If I try to connect using the "command-K" method, I get an message saying "you do not have permission to access this server" after entering my username and password. I also cannot connect as a guest even though I have enabled the guest account on the PC. The PC and iMac are in the same workgroup. I have file sharing turned on the iMac and can access the iMac from my PC with no problems at all. In Tiger, I was able to access to the PC using "command-K". Any ideas? I'm stumped. I feel like I've tried everything.
View 24 Replies View RelatedI'm a mac noob. Actually I'm pretty technologically challenged full stop. But I got a mac about a month ago. There's not problem connecting to the internet, it picked it up straight away. However I live in a house full of windows computers which are all wirelessly networked. Sometimes I can connect to them (for no rhyme or reason) and sometimes I can't. I don't particularly care that I can't reach them but I need to be able to connect to my printer. I just plugged my printer straight in the USB and it worked so they're compatible.But my network and computers aren't in the side bar of the finder at the moment. I try clicking "go" and then "connect to server" but I have no idea what my server address is. Is it my IP address or what? as I said I'm technologically challenged.
View 6 Replies View RelatedI just installed it from bootcamp, and there seems to be no way for me to connect to my internet. Windows XP only came with one disk also.
View 3 Replies View RelatedI've recently bought my first mac (mac mini) and frequently access a shared driver that is hosted on a Windows server. Until today I have no issues by going into finder and typing
smb://ip or hostname here
However, today I get:
"There was an error connecting to the server "server". Check the server name or IP address and try again".
The same problem occurs when I try to access it by IP address. I can ping the particular Windows computer just fine in terminal by both host name and IP. I know that sharing works because it's fine on other Windows computers. It seems the problem is in Finder. I have made no changes at all since the last time it worked.
I've looked high and low for the answer to this with no luck. I've mapped a lot of my windows network shares at work on my MacPro running leopard without problems. However, I'm extremely stuck trying to connect to the last one which is located on a special DMZ (demilitarized zone) server.On my windows machine I simply use the ip method and I'm prompted for login credentials. It's important to note that the login credentials for this DMZ network share are different than my usual work domain login (the Mac uses that same login with no issues).
View 5 Replies View RelatedI used to be able to connect my old Mac Pro and the Windows 8 machine. It was quirky and not especially reliable, but I could make it work most of the time. They are plugged into the same router. I have set all the preferences in "Sharing" as prescribed and as they used to work — File Sharing is on, SMB and AFP are both selected for my user account. The other computer shows up in "Network" on both machines, but they just won't connect.
Info:
Mac Pro, OS X Mavericks (10.9.4), The new Mac Pro
I have a MacBook with 10.6.4 and trying to connect PC with Windows 7 wirelessly, computer to computer. I'm trying to go into MacBook from PC laptop to copy files. Is this possible? I tried "Creating Network..." under Airport menu on MacBook, but couldn't get it to work. Is it possible with ethernet cable? I could always burn CDs but trying to learn little bit about network and stuff.
View 1 Replies View RelatedI've added the MAC address to my MAC filters changed the IP address, Subnet mask and default gateway along with the Physical address. I've checked and double checked the settings and still can't connect.
View 14 Replies View RelatedSo basically, I was given a decent windows machine for free, and I'm trying to convert it into a place where all our family's files can be accessed.
However, I'm having a real tough time trying to connect to the windows 7 computer. I've tried Go>Connect to Server and put in "smb://" then the IP address (192.168.1.105 in this case), and I get the error message saying I should check my IP address and contact my system's administrator.
Now, the part that baffles me the most is that in the finder left hand sidebar, I can see the homeserver and the other computer on the network. When I try to connect to either one of them, it takes a good 15 minutes then the computer gives up, even when I connect with the administrator username and password.
Is it a problem with my computer? I've got them all on the same workgroup (MSHOME) and are connected to the same router.
I have installed windows XP in my MACBOOK. Everything went well except internet connections. I am unable to connect with my wireless network. But able to connect when logged in mac OS. Do i need to install any drives for this.
View 2 Replies View RelatedI cannot connect to my HP7150 on my windows network from my MBP. I can see all of the files that are on that computer, and other windows computers on the network can print just fine. Is there a tutorial somewhere that can help or can someone please tell me how to get it working? I've tried just about everything.
View 6 Replies View Related