OS X :: User Data Location - Leopard - Drive Failing And Trying To Recover?

Jul 6, 2009

I replaced my daughters drive in her Macbook last fall. The move went without any issue and she had an additional 100GB after the upgrade.

Now it appears the drive is dying. It won't boot to get to the login - it gets to the blue screen and mouse cursor in the upper left, then circular spinning countdown in the center, then repeat, then hang at the blue screen. I can hear the drive making a repeated winding/reading type of noise when it gets to the point where the login should be coming up.

Here's what I've done so far:

- I've tried booting off the Leopard disk and verified disk - it passed.
- I also repaired permissions - it repaired about 2 dozen and passed as well.
- I've reset the pram with no impact
- It won't boot in safe mode - keeps getting some flashing text at the top and won't complete the boot.
- I took the drive out and ran Spinrite 6 on it - it got to about 53% and it started making the noise like it was stuck at the blue screen at Leopard bootup. It ran for 3 hours and the drive eventually passed with nothing fixed and no errors found.
- I'm afraid to try an archive and install since I think the drive is failing

So here is what I'm going to do.

- Purchase replacement drive and do a clean Leopard install
- Put the existing failing drive in my USB powered enclosure

I don't have a time machine backup to work from.

Now my question is where is my daughters user data and system files? She is the only user on the Macbook. Once I find them and bring them over - barring any other issues - where do I put them on the new drive/Leopard install and make her desktop, user data, music, photos, network settings, and apps the same again - like it would be with an archive and install? Is it as simple as copying over a user folder or series of folders? What about user login - does it have to be the same or does that come with copying the folders/data over.

View 2 Replies


ADVERTISEMENT

Hardware :: Software To Recover Data From Failing Hard Drive?

Dec 24, 2008

My friend has a black Macbook that is extremely slow. It takes about 10 min. to boot up (literally), and when it does finally boot up, the good ol' beach ball comes up whenever I click on anything to do anything.

I then tried hooking up to a new iMac as a target drive. I was able to read some of the hard drive, but the User folder was empty, so I could not retrieve any of the data. Also, trying to access the target drive and trying to eject it made the new iMac slow way down.

And the hard drive was making a faint chirping sound, and then it turned into a crunching sound (much like that of the old 4200RPM hard drives of years ago).

I tried resetting the PRAM and also reset the power management. I also did a Safe Boot...all to no avail.

The DVD burner does not work. So, I could not do a hardware test or an archive and install. However, since the hard drive is most likely failing, an archive and install would not help any.

So, I'm guessing that the hard drive is going since the hard drives in Macbooks have been known to fail (it happened to a daughter of a friend of mine).

Is there a software out there that will allow me to retrieve the data from the drive? Trying to avoid having to go to a data recovery place.

View 5 Replies View Related

Software :: Recover Data From Failing OS X Partition From Windows XP

Apr 21, 2010

We have a client who has a MAC Mini running OS X. System is not booting into the OS, its freezing up during boot process. Data on the hard drive is critical to the user.

- The hardware utility on the OS X install cd says there's no problems, but when removed from the mini, connected to a PC, and tested using bootable cd IBM Drive Fitness Test and Seagate Seatools, the drive fails both tests.

- The drive has been connected to our data transfer system (running Windows XP) and unsurprisingly XP sees the drive in disk managment, but doesn't see the partition in Explorer.

- Research online led us to HFSExplorer, which dies see the MAC partition and file tree. But any attempt to extract files results in a Java runtime error saying that the source cannot be accessed. Once this error is received, HFSExplorer crashes and must be relaunched, and will not detect the MAC partition again until the computer is hard shutdown and restarted. THe physical drive vanishes from disk managment when the error occurs also.

- Further research led us to MacDrive, which mounts the drive (after reporting that it detected an error and asking if we still want to mount). We can again browse the file tree, but as soon as we attempt to copy anything, it fails and the explorer window with the MAC partiton vanishes. Again, the system must be hard restarted in order to restore access to the partition.

- Found a repair utility in the MACDrive program. Running that results in the error "80070002: The system cannont find the file specified."

- I'm out of ideas at this point.

View 2 Replies View Related

Applications :: Changing Office 2004 Microsoft User Data Folder Location?

Sep 19, 2006

It really ***** me that Office 2004 places the Microsoft User Data folder in your Users/Accountname/Documents folder, and if you move it it just makes a new one Is there any reliable way to move the location to somewhere else and keep it that way? The Documents folder should be the realm of the user and the user alone, damn applications should keep their noses out!

View 11 Replies View Related

Applications :: Unable To Recover Data From Erased Drive - EMac Data Recovery

Sep 6, 2006

I have a EMac with Mac OS X vs 10.3.9 Prior user erased hard drive. Took to ADR data recovery and they scanned the hard drive and were unable to recover any data. Looking for input on other techniques to recover data from hard drive or other companies that specialize in Mac data recovery.

View 6 Replies View Related

OS X :: Recover Data Fom Hard Drive / External Drive Stopped Mounting

Sep 4, 2009

So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.

Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!

View 2 Replies View Related

Mac Pro :: FW Drive Recover Data?

Jun 18, 2009

I have a LaCie Big Disc Extreme that has failed. The drive indicator flashes continuously, and the disk utility can not see it. I have tried FW800 and USB to no avail.

Here's the problem: it is a 500 GB drive, but when I opened it, I found that it is actually 2 250 GB drives with an ATA interface. Is anyone familiar enough with these drives to know how they are formatted, and how to recover the data? I am running an early 2009 Mac Pro 8x2.26GHz.

View 3 Replies View Related

Mac Pro :: How To Recover Data From Crashed Drive?

Oct 23, 2010

So unfortunately, the hard drive on my 2005 G5 crashed, atleast that's my guess. All it does is click when I attempt to turn it on. I'm fairly good with computers, but when it comes to fixing one - I hand it off to someone with a little more knowledge.

I have two hard drives in the computer - one that's got the OS installed (factory 150GB), and another I use for saving videos, pictures, music, etc (750GB). Now, I'm assuming that because the computer doesn't boot up, that the hard drive with the OS is the one that crashed? Is that a safe assumption?

Secondly, is it possible to recover the application files and other data that's been stored on the crashed drive? If so, how much should I expect to pay? Is it something a local 'work from the home' computer tech could do? The reason I ask is because craigslist is full of guys willing to work on the computer for a decent price.

View 2 Replies View Related

Software :: Trying To Recover The Data From Drive?

Apr 30, 2008

I'm so desperate for my hard disk. I have recently lost the partition table on a 300GB Samsung Firewire drive which contains my works. I would like to try to recover the data from this drive, but I can find no (command-line or otherwise) to do this. I have got 5 Journaled HFS+ partitions in my external hard disk.

Before this problem exist; I selected the fourth partition which capacity is 56GB, and choose 'Erase' with as a disk type 'MS-DOS File System' with Mac OS 10.4.11. But Disk Utility failed in 3 seconds, and gives an error. Then all my 5 HFS+ (Journaled) partitions stopped mounting and is not even recognized by Disk Utility which says no partition map found, and drive is unformatted. And isn't even recognized in Disk Utility which shows only disk name.

I think my apple partition map table corrupted by Disk Utility. All my data still in hard disk, but I don't know how can I mount them again. Disk Utility's verify and repairs buttons doesn't appear for Samsung HDD in Tiger & Leopard. I used some applications for repair my hard disk and partitions. But all of them are failed. Desperately seeking a way to repair or recreate corrupted Apple partition map.

Please, could you help me for mounting my 5 partition in my hard disk. How can I have got my all data again?

View 4 Replies View Related

OS X :: Recover Data From Initialised Hard Drive In 10.1?

May 6, 2009

A friend emailed last night saying he had a drive that had been 'acidentally formatted' (that's a lot of accidental mouse clicks if you ask me), that it took 2 seconds to format so it should have not actually wiped any data on there.

I've used Disk Warrior in other circumstances but never tried on an initialised drive. Nor would I know how to get a copy of such old software.

Does anyone have any ideas as to what software from that time might recover the data?

View 4 Replies View Related

OS X :: Recover Data From Hard Drive That Won't Mount?

Jun 19, 2009

Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.

View 2 Replies View Related

Hardware :: How To Recover Data From A WD Hard Drive?

Aug 17, 2009

my imac crashed last week but thankfully i had back up of all my files via my western digital my studio hard drive. thankfully right? well i royally screwed up and while trying to fix my crashed hard drive on my imac, i guess i accidentally reformatted my external drive, deleting EVERYTHING

I am pretty sure that I can go to a vendor and have them restore the HD correct? If so, what does something like that cost? I had probably 50 gigs lost, mostly photos, MP3, AVIs, and programs.

View 3 Replies View Related

Mac Pro :: Recover Data From A Hard Drive With Bad Blocks?

Mar 27, 2012

An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now.  (Yes, it was on a surge protector and no I did not have a backup.  I was actually preparing for the process of creating a backup when the power went out!)  Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive.  I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block.  how/what software to use to recover the data?  I know there are programs that will avoid the bad block but I've only found them for Windows.  Are there any that will do such a thing in Lion? I can not afford a data recovery service.  Trying to do this on my own.

Info:
Mac Pro, Mac OS X (10.6.8), early 2008, 2 quad-core Intel Xeon

View 3 Replies View Related

OS X :: Broken External Hard Drive/how To Recover Data?

Mar 5, 2009

Our old Toshiba External Hard drive has failed ( approximately 3 years old ). It powers on and the blue light comes on, but the fans don't spin and you can't see it in the finder or on my computer ( we tried on both PC and Mac ).

Any ideas as to how I can retrieve the data... without going to a specialist and pay ���, or would that be the only option

View 11 Replies View Related

MacBook :: Possible To Recover Data From Crashed Hard Drive?

May 29, 2012

My computer had frozen up so I had to restart it by holding down the power button. After I had done this, I kept getting a recurring kernel panic error. I had taken my MacBook the Apple Store and the tech who looked at it said that my hard drive was no longer good and that I would either have to replace it or purchase a new laptop. Regardless of whether I replace my hard drive or just purchase a new laptop, would there be any way to get my data that I lost off my old hard drive. I have some stuff backed up, but not recent data.

Info:
MacBook

View 6 Replies View Related

OS X Mavericks :: Recover Data From Erased External Drive

Dec 6, 2014

I have an external USB HDD that was originally formatted as Mac OS Extended (journaled), it was accidentally erased (using Disk utility) and re-formatted to FAT32. the HDD has not been used since (other than to try and recover the data using various tools), so no new data was been written to it. 

Any methods that could be used to recover the data from the drive?i've tried DiskWarrior but that can't do anything with the drive as it's not a "macintosh disk".

Info:
Mac mini, OS X Mountain Lion (10.8.3), 2.3Ghz Core i5

View 7 Replies View Related

OS X :: Hard Drive Crashed / Recover Data From Corrupted Drives?

Jun 2, 2008

My friends iBook hard drive has crashed and I'm in the process of replacing it. However, he had a lot of important data on that hard drive that he needs recovered. Is there any software that you can recommend (for Windows or OS X) that will recover data from corrupt/bad hard drives? I have software for NTFS/FAT32 but don't know of any good ones for HFS.

View 14 Replies View Related

OS X :: Recover Data From Hard Drive / Logic Board Failure?

Nov 5, 2009

My iMac G5 is basically dead. Logic board failure. Apple is going to replace it by giving me a credit toward the purchase of a new iMac but that is a different story. I need to send my G5 back to them. Can I take the internal hard drive out and transfer the data to a PC and then get that data off the PC onto an external HD?

View 3 Replies View Related

Intel Mac :: Recover Mac OS X Hard Drive Partition Deleted Data

Mar 9, 2012

I am using mac OS X 10.6, during the time to create a installation disk using disk utility by mistake I have selected my partition drive and after that I couldn't find any data in that drive, how to get it back data.

Info:
iMac, Mac OS X (10.6)

View 1 Replies View Related

MacBook Pro :: External FW Hard Drive Is Unreadable - How To Recover The Data

May 14, 2012

I had mounted my drive to a G5 tower and it was severely frozen and would not let me shut down. I forced the computer off while the drive was still running and now when I try to mount it it, every computer tells me that the drive I inserted is not readable, and it gives me the option to initialize, ignore, or eject. I don't want to lose any of that data, is there anyone that knows how to recover these files?

View 10 Replies View Related

Hardware :: Hard Drive Making Grinding Noise / Unable To Recover Data

Sep 24, 2009

I have a student who put most of her project work for the past few semesters on an Western Digital hard drive which was in a I/O Magic shell. It was dropped and immediately started a grinding noise. She took it to the local mac guru who has been unable to recover any of the data. My gut tells me it's a goner but I wanted to run it by the gurus here to see if they might recommend anything that we might try before giving up.

View 8 Replies View Related

Hardware :: Recover Data From Dead Lacie Hard Drive / Unable To Mount Hard Drive

Sep 6, 2009

Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.

Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.

Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.

I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.

View 3 Replies View Related

Applications :: Recover Data From Fat32 Drive / Photorec Unable To Navigate External NTFS

Dec 16, 2009

I am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).

Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.

View 4 Replies View Related

OS X :: Major Bug In Snow Leopard Deletes ALL User Data

Oct 12, 2009

Reports have been cropping up on the Apple Support forums that users have been losing all their data due to a nasty bug in Snow Leopard, Apple's latest Operating System. Many users are reporting that all settings are being reset and most data is gone, according to iTWire.

The problem, can easily be reproduced when a user logs into the 'guest' account, either on purpose or by accident, and when they log back out of the account and back into their normal one, they find that their account has been fully reset with all data wiped and lost - the account is like a brand new one. The home directory still exists under "/Users/username" but is completely empty.

Users are reporting that the data is unrecoverable and cannot be found anywhere on the hard drive, and the only way to restore it is if the user has been performing backups on a separate hard-drive. Apparently the problem has been present since a few days after launch, as the forum post dates back to 12th September, but as of yet, Apple has been silent.

It seems the only work around at this stage is to disable the Guest account, or at least disable it and then re-enabling it so that it's a native Snow Leopard account. Another suggestion is to create a new account and enforce parental controls, if you really need a temporary account.

It's not clear how many users are affected, but it seems like any user who had Leopard before the upgrade, and had the guest account enabled are affected and are at risk.

Luckily... I'm a Win 7 guy.

View 3 Replies View Related

OS X :: Snow Leopard Guest Account Bug Deletes User Data

Oct 12, 2009

Reports of a potentially critical Snow Leopard bug that can erase a user's account data have continued to surface since the operating system's debut [Updated with Apple official comment].

Since Mac OS X 10.6 launched in late August, numerous reports online have detailed the issue, which is triggered by logging in and out of a guest account on a Snow Leopard machine. Upon logging back in to their regular account, users will find that it has been wiped of all data.

The issue has prompted numerous threads (1, 2, 3, 4, 5) on the Apple Support Discussions, with reports suggesting the issue cannot be reproduced with any exact certainty. Apple has yet to publicly acknowledge the issue.

"When I logged into my MacBook Pro this morning, it was as if I had logged into my Guest Account and not my standard user profile," user parshallnet said. "No icons on the desktop, the desktop wallpaper was the default 'space' photo and not the one I had assigned, no documents in the docs folder, apps behaved as if I'd never opened them before."

The issue was initially reported when Snow Leopard first launched, but complaints have grown as adoption of the platform has continued. Monday, Engadget highlighted the issue.

A month ago, CNet detailed a potential fix for the issue, which is reportedly caused when users have had a guest account enabled for login prior to the install of Snow Leopard. The easiest way to avoid the issue is disabling the guest account.

If afflicted by the bug, the home folder can be restored, though without a backup, the loss of data is likely permanent. If a user has Time Machine running, they can restore their Snow Leopard installation while holding 'C' at startup and choosing "Restore from Backup" from the "Utilities" menu.

Update: In a brief statement, Apple acknowledged the issue Monday evening, according to CNet

"We are aware of the issue, which occurs only in extremely rare cases, and we are working on a fix," a spokesperson said in a prepared statement.

Since its launch in August, Snow Leopard has been received with positive reviews and strong sales. A quick update, Mac OS X 10.6.1, was released soon after, but apparently did not provide relief from the guest account bug.

Mac OS X 10.6.2 is currently in beta and only available to developers. It has nearly 150 general focus areas.
[ View this article at AppleInsider.com ]

View 39 Replies View Related

OS X :: Leopard - Admin Reset - Data Recovery From Main User?

Jan 31, 2010

Recently I lost my admin identity password and consequently I was unable to trash applications or any file requiring the admin password. And so I reset this by reinstalling the setup (this is a bit of a hack I learned about through Youtube). After rebooting the system I was asked to create a new admin which I did and then I was asked whether I wanted to transfer the data � I answered no to this option.

All my data (files, folders, photos, music, etc. now resides in an identity called Main User. How do I import all this material into my new admin identity or manage this such that all the preferences, bookmarks, Microsoft email user identity and all privileges are restored to how they were before?

View 1 Replies View Related

OS X :: Unable To Recover Lost Data / Data Recovery Stucks At 33%

Sep 26, 2010

So, I'm trying to recover some lost files. I put it on Data recovery 3. Everything went fine until the power in my house went out, stopping the entire process. NOW when I try to run the process, it just stalls at 33,3%, with no indication of how much time left...

View 1 Replies View Related

OS X :: Data Rescue 3 Seems To Be Finding Lost Data But Doesn't Recover It?

Nov 1, 2010

Need some help here. My friend is a DJ and had an external drive with tens of thousands of songs on it. The plug broke on it and I think that corrupted it since Eject was not used. I pulled the 3.5in HDD out of the case and hooked up up with some other external plugs I have.

When I run Data Rescue 3 on it, it shows that it sees almost all of these and the only two formats it counts up are mpeg and mp3s. Data Rescue then finishes the scan and has a bunch of crap files that are not needed, but none of the songs show up. What is going on here? Did I miss something in Data Rescue 3.

The drive is a 1TB drive and the backup drive we are using is 640GB, but there was only about 250GB of music on the drive to begin with.

View 6 Replies View Related

Applications :: Transfer Personal Data From Home User To New User On Same MacBook?

Sep 3, 2009

I have tried very hard to find the answer to my transferring question, but nowhere do I find my answer nor does Apple offer free help or even help by email.

So here is my issue. I want to transfer all my personal data from my HOME user account on my MacBook to a NEW user account on the SAME MacBook. The reason is that my Microsoft Office has a certain issue that is only solvable by starting up in a new user. So now I want to transfer all the personality, data, files, and all that from my home user to the new user on the same computer. After that, I want to delete the old Home user and make the new user the default home user account.

View 2 Replies View Related

MacBook Pro :: SMART Failing Caused By Data Cable / Logic Board

Aug 21, 2010

So I took my MBP into the apple store today and explained that my original hard drive was showing as failing after my two momentus xt drives were apparently failing as well. He said it was really strange and hooked up the drive to their external interface and low and behold there was no errors on the drive. He said it's most likely being caused by IO errors due to a bad SATA cable or possibly logic board. We had my MBP sent in for testing. So basically if you see SMART failing status it may not be the drive after all.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved