i had logic pro on my computer but then i deleted it. now that im trying to install it again im getting an error message saying 'unable to install logic pro on this volume. a newer version of this software already exists on this volume'.
View 1 Replies
I am no longer able to Enter Time Machine. Therte are no changes in the software (or hardware). It continues to backup with no apparent problems.
Info:
MacBook Pro, Mac OS X (10.6.1)
I`m going to format my macbook completely and wonders if there would be any problem with authorizing/installing/registring Logic Pro 8 after a format? Is there something have to deauthorize before i delete everything?
View 1 Replies View RelatedLike it says. I don't want to use up 40GB on my MBP's HDD on just loops, but I do want access to all of them. I know I could install the entire Logic package on my external, but I'd rather have the application on my hard drive and the loops on an external.
View 1 Replies View RelatedI just got logic express 8 and i'm using it with axiom 25, i'm trying to figure out when making drum beats, is there away that i can see my drum kit sounds and use my mouse to punch in where i want the notes, cause i'm not too good at using the 25 and trying to hit cymbals and hit hats and the rest, if anyone could let me know,
View 1 Replies View RelatedI've got a 20" 2.1GHz iMac G5 iSight on my bench that doesn't power up.
I've tracked down the issue to a grenaded IC on the logic board.
The IC is an 8 pin SOIC chip, to the right of the power connector, just above the ALS connector. It is labeled UE300.
If you know what this guy is, can send me a good picture of one, or can provide me with the numbers from the IC, I can get this mac back to life.
i've been using Logic Express 9 for a few months now and started today messing about with the included demo project "The Numbers Game".Unfortunately, I accidentally hit save on a change and now have fundamentally affected the demo.
If I do a re-install of Logic Express 9 will this wipe out or affect my other projects in any way? I really don't want to lose any of the work I've done so far, but would really like to have back the original demo project as a learning tool.
I have a PowerMac G4 I'm trying to install safari 5.0.3 but it has this error message. I looked everywhere but there is no other version of safari?
Info:
PowerMac, Mac OS X (10.5.8)
Mac keeps powering down on startup. I am able to get to the Lion Recovery and verify the physical disk but I am not able to verify the volume "MAC HD" I get errors. The physical disk verify looks good.
Info:iMac, Mac OS X (10.7.3)
I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, I get a message saying I need 10.7. to install Lion.
Info:iMac, Mac OS X (10.6.8)
I use a lot of plug ins for music production in Logic. Like an idiot, i upgraded to snow leopard, after having this problem with the upgrade to leopard from tiger. Of course half of my plug ins dont work.So i Time Machine backed up everything on my HD. I put my old leopard install disc in and restored to my Time Machine volume. It took about 2 and a half hours.
At the end of that, it asks you to restart, and i do and as soon as the apple pops up on the off-white screen, kernel panic and i have to restart. this is never ending
Ive tried repairing and verifying disk permissions from the leopard disc of my HD and still nothing.My final guess would be to just do a clean install of Leopard and then restore from time machine again. This seems SUPER risky to me as there are TONS of important project session files that i CANT afford to lose.Everything is backed up on my Time Machine drive, im still just a little nervous about doing this.Anyone have any other ideas and does this sound like a secure plan?
i got a white screen when i booted up last night, so i saw it as an opportunity to upgrade rather than trying to fix it. I popped in a fresh copy of snow leopard, it made my white screen boot up. before installing, i opened disk utility and erased my hard drive, and it automatically made a single partition, titled "untitled" and mounted it. i installed to "untitled" and turned install log, and the progress bar is empty. time remaining: about 30 minutes log: checking catalog file is the last line, and it's been there for over 1 hour. i restarted and now it says "volume headers need minor repairs" "repairing volume" and hangs there now.
View 9 Replies View RelatedOS X: Cannot install on a volume used by Time Machine for backups
Info:
MacBookPro, Mac OS X (10.6.8)
Does anybody know what the specific differences are between Logic Studio and Logic Express?
Also, is there any place where I can get Logic Studio for cheaper than the $499 retail price? The cheapest place I found I was at MacMall for only $49 cheaper.
Can anybody find anyplace cheaper, preferably around $350 or lower?
I want to save the hassle of trying to install using the DVDs as I'm anticipating that this won't be as simple as it should be and is likely to be less trouble with a download.
View 1 Replies View RelatedI'm unable to erase a disk/volume so that I can migrate. The only thing it's allowing me to do is erase free space. I am using MacBook 10.6.8 and migrating to a different MacBook using 10.6.8.
Info:
MacBook, Mac OS X (10.6.8)
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I have my iMac and PC connected to each other through the ethernet. The iMac is set to read/write the shared network volumes on my PC. The Finder is used to set up the SMB connection. Everything works fine. Mac applications are able to read and write files to the PC.
However, after a day or so (during which the PC has been kept on, while the Mac has slept) problems occur. It seems as if it is possible to access the network volumes and even view the root directory. However, clicking on any directory will show a blank directory.
Any clues to this error... I've been getting it fairly frequently as of late. Probably every few days.
Unable to complete backup. An error occurred while copying files to the backup volume.
I've spent a good deal of time over three days trying to do something that I think is both doable and shouldn't be all that hard. I have a 750gb external HD attached to a Mini, and I'd like to use that drive to do TM backups for the Mini, as well as three MacBooks.
But I can't seem to get access to the backup drive from the laptops to either get going in the first place, or to remain available for TM. I get "volume can't be mounted" errors, "image can't be mounted errors", etc. I find that I can't ever eject the backup drive from the Mini (always told an application is using it...even if I've just booted up the Mini). And with one of the MacBooks, even a direct FW connection to the drive doesn't result in the drive showing up in Finder.
Isn't this a pretty straightforward thing to do? Is there a step by step somewhere that might help me figure out what I'm doing wrong, or what I need to fix? Should I reformat the drive again and start over (there are no important backups on it yet)? By the way, the drive is formatted Mac OS Extended (Journaled).
I'm having trouble backing up with Time Machine. Here's the setup:
1. Three, 1TB external hard drives in a concatenated software RAID. This means that they are treated as one large drive. There is no mirroring, no increased data rate, blah blah blah. It's just three hard drives in the place of one. I am aware that this means my backup is three times as likely to fail with the hardware, but that's OK.
2. These three are connected to a USB hub.
3. This hub is connected to a G5 tower. The G5 tower can back up to the concatenated drives (I'll call them just a RAID from here on), and also all additional external hard drives that I connect to the G5 tower have been backing up to the RAID no problem. This is great.
Here's the problem:
I'm trying to get two more computers to back up to the RAID wirelessly. I read a lot online about how this didn't used to be a supported feature (backing up to an external hard drive over a network with time machine), but that Apple has recently upgraded Time Machine to support this functionality.
The first computer I started with to try to backup over the network was a Macbook Pro, trying to get it to backup to this RAID. It can see the RAID over the network, mount it, copy files to it/read it, but CANNOT time machine backup to it. I select the network RAID as the backup device, hit "back up now," then get this message:
"The external volume cannot be mounted."
This is really bizzare, considering that it is mounted, and that I can copy to it. Just for your information, I have an airport extreme wireless network that has been working beautifully, no Keychain access issues, no 3rd party firewall, nothing. I've run through Applecare on this issue: the MacBook Pro has never done ANY time machine backup on the RAID, not even a partial one, so there's no dangling sparse bundle or backup folder or anything like that. All network permissions check out, etc. I've tried repairing the RAID with disk utility, as well as repairing permissions (although I have not done either of these things to the MacBookPro).
The latest thing I tried was plugging the RAID directly into the Macbook Pro. Here's where I got the first clue (at least I think so)...Plugged DIRECTLY into the MacBook Pro, the RAID will mount, but the MacBook Pro WILL NOT backup to the RAID. It gives me the same message: the selected volume cannot be mounted. Again, this is strange considering that, just like when I am viewing the RAID over the network, plugged directly into the MacBook Pro the RAID will mount, I can read it, copy files to it, etc.
I have considered plugging the RAID into the Airport extreme directly, but first of all this would mean much slower transfer speeds with the G5 tower, which is a big issue considering the files I am backing up every day, and two, since it seems that the RAID won't be recognized by the MacBook Pro even when plugged in directly, I'm thinking that this is a more fundamental issue.
Is it likely? Aperture is a pro app and is on there, and it'd make sense if they also added Logic and Final Cut - it'd be like a professional version of iWork with the whole set.
View 18 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I have a new iMac with Leopard. When my files were transferred from my older iMac, Safari didn't load. I downloaded Safari, but two days later it disappeared. Now when I try to download Safari from the web I get the following message when I select the Hard Drive as the destination:
"You cannot install Safari 3 Beta on this volume. This volume does not meet the requirements for this update."
Trying to resize and existing volume using disk utility on Leopard. Have a 1TB internal Drive with 1 Partition (extended Journal), not a boot drive this is just for data, now want to add another partition (2 Volumes), in effect shrinking the size of the original so I have 2 equal sizes.
So Far I have used 450GB, so there should be enough room to do this right? Although when I go through the process, I get the message 'not enough space on drive'.
I am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code:
Requires Samba to perform SMB lookup features.
Requires the following perl modules:
Net::Pcap;
NetPacket::Ethernet qw(:strip);
NetPacket::IP qw(:strip);
NetPacket::TCP;
NetPacket::UDP;
DBI;
Unicode::String qw(utf8 latin1 utf16);
Proc::Daemon;
Proc::Simple;
FileHandle;
Unix::Syslog;
GDBM_File;
well where do i begin ?? basicly i purchased a ibook g4 14" 1.33ghz that had its harddrive upgraded by a apple service provider. About two weeks after this upgrade took place the harddrive started playing up and the machine would not see the boot volume on the drive when restarted or every now and then the machine would freeze after some time of use, a few hours maybe. i ran apple hardware test and it came back clean after zapping the pram and disk warrioring the drive it fixed this for a day then it started again oh well.
so i sent it back to the service provider who said yep its the hadrdrive goody !!! oh NO he calls back the next day and says the new harddrive is not reconized and that they tried a new ribbon cable WTF when i sent it in the machine saw the harddrive via target disk mode all the time it just didnt see the boot volume.
NOW his saying its the logicboard **** sake !!! so my question could this machines logicboard be fried when it was fine before i sent it in , i mean the ide controller was fine i checked it and now im faced with a brick !!!what do i do ????
I'm looking for a FREE data recovery app for os x to recover data from a NTFS hard drive. The hard has lost it's volume and will not mount and I've tried some other programs and I can see the files but I can't get them off because every program I've tried isn't free and won't let me copy them off. I've tried looking for one but I can't seem to find a good one. I just want to copy off the files and then I'll wipe the drive and fix the parition.
View 5 Replies View Relatedi have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work
2. erased hd..still did not work.
3. made partition to install from external hd...now just made a total mess with computer.
4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
please help i dont know what to do!!!!!
love my mac. buy i messed it up....
i just bought it and am having a little trouble exporting a track i made. i didnt do much to it, just cut it and can not figure out how to export. i go to the export option and then try and save it to the desktop but it is not there when i go to find it
View 3 Replies View Related
