IMac :: Snow Leopard Install Hangs On Repairing Volume
Jun 20, 2010
i got a white screen when i booted up last night, so i saw it as an opportunity to upgrade rather than trying to fix it. I popped in a fresh copy of snow leopard, it made my white screen boot up. before installing, i opened disk utility and erased my hard drive, and it automatically made a single partition, titled "untitled" and mounted it. i installed to "untitled" and turned install log, and the progress bar is empty. time remaining: about 30 minutes log: checking catalog file is the last line, and it's been there for over 1 hour. i restarted and now it says "volume headers need minor repairs" "repairing volume" and hangs there now.
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
Whenever I verify disk permissions/disk on Disk Utility, it tells me the volume needs to be repaired, and to do this I must insert the Mac OS X start-up disk
The only problem is, my slot where you put CDs is completely wrecked (I'm very hard on my computer). Is there any other way to fix this?
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I'm trying to install Snow Leopard 10.6.3 onto my imac that has 10.5.8 currently. I put the disc in and it ejects it again. Before the install box did come up on the screen but that did not work either.
I downloaded the most recent safari upgrade for Leopard (Not Snow Leopard). Every time I try to use it, Safari hangs the entire computer before loading the home page and takes a minimum 10 minutes before I can do anything. I just get the Spinning Pinwheel of Death. I tried reinstalling it but that hasn't worked.
So after purchasing a new iMac last month which came with Lion, I have decided I would like to install Snow Leopard. If it is something to do with hardware that Snow Leopard does not have drivers for, why does Apple not supply downloadable drivers?
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.2)
I have random hangs in OS 10.6.6, I have been noticing these hangs *more* after a period of inactivity (screensaver, after inactivity of 20 or more minutes) , but I have had the system hang on me while I am using it actively as well.   OS 10.6.6 has been on this drive since 7/2011 , without hangs but I recently upgraded Firefox to 10.0.2, - perhaps a factor?Â
Energy save set to never for sleep on either CPU or display.  I do put to sleep if I am leaving for a while.Â
FYI On Launch, my MacPro opens Mail , iCal and Firefox. The Mac is a January 2007 Mac Pro Quad core 2.66gh.  I never had a single hang with the computer until this. Â
I have an iMac G5 (circa 2005) with a non intel processor, I recently purchased Snow Leopard to update this, however it advised I need an Intel Processor to install Snow Leopard. Is there a way of getting round this, the main reason being is I want to use the Magic Trackpad - but ive been told this will only run on Snow Leopard OSX? If anyone could answer this asap I would be grateful, today is the last day I can take back Snow Leopard and the Magic Trackpad to the Apple Store for a refund.
I'm purchasing a new MacBook Pro in a couple of weeks and the install discs will be Snow Leopard.
At home I have a 2009 Intel iMac. Will I be able to use the MacBooks install discs to upgrade the iMac or do I need to buy iMac Snow Leopard separately?
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
How do you get a copy of Rosetta to install on 10.6.8? I have a power pc software program and need to install. Rosetta does not automatically install from the Apple servers. Is Apple discontinuing Rosetta support?
I can't install a printer on my iMac. When I go through system prefs, add printer, it sees the printer and manages to make it to looking for installable options then that window just hangs. I can use the computer, but the window stays and it never actually installs the drivers, i'm using a wireless connection. The same thing happened before with a previous Epson printer connecting by USB. In the end I managed to connect it to my Macbook.
I have a unibody Macbook Pro running OSX 10.6.3. Everything is up to date but the computer is now on its second hard drive and fresh install of OSX and is still unusable. After the hard drive was replaced, it worked flawlessly for an evening. However, the old symptoms reemerged the next morning. Symptoms: very slow to boot or freezes on gray screen with status circle frozen grey circle with slash through it on boot
once it boots, if it does boot, the beachball constantly spins/freezes... I have literally no software installed on the fresh install and it still does it when attempting to boot in safe mode Also, the hard drive when checked gives the following errors even after I repair them in drive genius (the same errors the old drive reported):
My iMac has slowed down signficantly recently and sometimes hangs at log-in or very occasionally at other times. The screen grab of the activity monitor shows the amount of memory 'used' at log-in with no software open - is it normal for half the memory to be 'used' already?
I have a applescript that sometimes hangs (this is on a blind server). reason is that the application (JSMS, it sends text messages via my mobile phone account) can not connect to the server. it than pops a message saying so, but as a result the script does hang and interferes with other stuff.
is there a way to have the script stop (would 'try if' do this?) or alternative is to force quit this script after 10 minutes with an other script.
Info:MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
Looking for the way to install my purchased copy of final cut pro x onto another Imac that I have at home. The app is not showing up in my account to access. Shows that I purchased it and the date, but no app. It is currently installed on my Mac Book Pro. No problems there.
After recently doing a fresh install of Snow Leopard, it was working great for about a week, and now it hangs at boot and flashes the Apple Logo, a NO sign, and a folder sign. I booted in verboose mode and it say that it could not load drivers.
I had this problem before and I used Leopard's (10.5) Archive and Install feature to fix it.
Where is this located on SL (10.6) ? I DO NOT want to loose my data
A few months ago I had a problem with my Macbook Pro, (late 2009 model, 15" 2.53 ghz) that many users with Snow Leopard have, the random 30 second freezes. I simply reset the PRAM and SMC and I never encountered it again. Now, out of the blue, on Sunday (yesterday), I started experiencing these hangs again, but worse. The night before I had been browsing the web and my battery went to reserve and shut down, so I plugged it in and when I awoke and turned it on I started experiencing problems. I figured I would try the same fix, and it almost seemed to make the problem worse. Now if I shut down the computer via "apple -> shut down", then turn it back on and log in etc., from the first few seconds the machine hangs. If I open a folder I get the immediate beach-ball and the machine is un-responsive for anywhere from 1 minute - 5+ minutes.
I have read a lot of fixes for this problem, but most of the people's problems resulted from using Safari or Spotlight. I strictly use Firefox and very rarely even open Safari, and I think I've used Spotlight maybe 3 times total, none in the past few months. So far the things I've tried are:
- Reset PRAM - Reset SMC - Run Disc Utility and verify, repair etc. (from SL install disc)
So I'm wondering right now what can I do? Its finals week right now and im in college so wiping my HD is not an option. I feel like there is just something hanging the computer but I can't find the culprit.
Recently Snow Leopard has become one slow ass OS, and I originally though it was because I was going low on HDD Space I was at 11GB free, went and deleted a lot of stuff and it was still slow, currently on 13GB, but it doesn't seem to of been that. I am now thinking it may have something to do with deleting the preference files for Spotlight because it wasn't working correctly (but that made it worse, won't find Apps).
But I am not sure if that is it either, CPU is not really used much either, and all that is happening is Beach Balls 24/7 so is there anything I can do to find the root cause of the issue before doing a fresh install of Snow Leopard (which will take hell of a lot of time as I need to ask my parents to send it back, so would rather there is a fix without reinstallation).
I've got this peculiar problem with my MacBook Pro Intel Core i5 running 10.6.8 with all the updates. Whenever I open the computer after logging out, the login window hangs. The insert bar in the username field doesn't blink and I get the spinning beach ball. Sometimes there's no cursor at all. If I close the lid without logging out there's never a problem. But of course that's not an aceptable solution.
I can not reproduce the problem with a fresh account, so I assume there's something wrong with my account. I've had this problem ever since I setup my original account. I've gone through the system.log and I do see some errors during the time the computer goes to sleep after I logout, but I don't know if they are serious or normal warnings.
My Mac Pro hangs up midway through loading Excel spreadsheets, small and large. I've tested the 14GB of ram with no faults. Tried two different new versions of MS office - school and business to no avail. Maybe video card?
Info: Mac Pro, Mac OS X (10.7.4), Brand new MS Office - business
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
Over the past month I have encountered a number of bugs with Snow Leopard on my MacBook Pro (mid 2006). Ever once in a while, usually during high performance task (like watching flash or encoding with handbrake) the temperature of my cpu will spike to 85-90 degrees celsius and then the system freezes.
During this freeze, I can still move my mouse, but I am unable to click on anything on the dock or any program. Moving the mouse over the dock does not invoke the magnification either. I have to do a hard reset to fix the problem.
Also every once in a while, a long blue horizontal line will appear in on the screen. (sometimes their in iChat windows, sometimes safari, and sometimes the desktop as shown in the photo).
