OS X :: Sound In The Windows Vista Not Active?
Feb 4, 2009I installed vista on my macbook used Parallels, but my problem is the sound not active in the windows vista. Could anyone help me to activate the sound in my windows vista?
View 2 RepliesI installed vista on my macbook used Parallels, but my problem is the sound not active in the windows vista. Could anyone help me to activate the sound in my windows vista?
View 2 RepliesLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
i recently installed a copy of windows vista basic and noticed that i couldn't get sound even after i installed all the drivers on the boot camp cd, i also tried installing the realtek drivers but that doesnt seem to have helped, when i go to the control panel it says that i have a week sound coming out of the speakers but i cant even here that.
View 2 Replies View RelatedI'm running Windows Vista Ultimate using Bootcamp. It runs fine with just a couple of anomalies.
First is that the sound quality is quite poor...almost like AM radio...I've tried installing the latest Realtek drivers but it's made no difference. I've stuck it onto "Rock" preset and that has improved things slightly but I was wondering if there was a proper fix for this?
Also, even though Vista see's that I have dual processors and correctly reports them (and I get two CPU usage graphs under task manager) applications such as dBpoweramp don't see it and run in single processor mode? Aga
I'm running a 24" 2.8GHz iMac with 4GB Ram.
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
Everything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
I recently installed Windows Vista Home Basic through BootCamp on my MacBook Pro. Everything works fine, except for the one thing that there's no sound... At the moment if i start something with sound, you'll see "the green bar jump up and down" But no sound... Tried to search for an audio driver, and installed one, (not sure which one it has to be though) But it didn't help...
Have tried uninstalling the whole lot and reinstalling it again, same thing happened, when i put in the Max OS x for the driver installation i recall it saying removing Realtek Audio or something, so search for that, but didn't help :/
Any ideas to would i could try to do?
I recently installed windows vista (home edition) via bootcamp on my macbook pro.
Everything is running perfectly apart from the sound. I think it might an issue with the computers sound card. When I plug my headphones into the audio output jack, no sound comes through... it still plays out of the speakers. The sound is audible, but just barely.
What may be causing this? Are there any specific drivers I need to install?
I'm trying to run vista via bootcamp. all seems fine except I got no sound (red light coming from 3.5mm jack)
I have no yellow !!!
Am I using a wrong driver?
Sound may not automatically switch to headphones using Microsoft Windows Vista on some Mac computers
Info:MacBookPro, Mac OS X (10.7.4)
My Macbook Pro (purchased Dec 2010) falls asleep when I am in the middle of using it (typing, clicking, watching a tv show).There will be no display or sound, and it will sleep. Most times it will wake up when I click the touchpad alot or close and reopen the screen. However, sometimes I will need to restart. I am not sure why it is doing this all the sudden. It is happening more and more often. How can I fix it? The AC Adapter is plugged in, battery work normally and I set the energy saver so that it would not sleep when plugged in.
Info:
MacBook Pro, Mac OS X (10.6.8)
I need a good soundcard for my MACPRO 8core , the sound from the MACPRO sounds SUCKS and has no settings (Realtek HD - with optical output). I want to be compatible OSX as well as Vista x64.
Can be internal or external, I do not have preferences ... but i need a good sound
I've installed vista 64 on my new MBP unibody, and installed vista 64 ultimate under boot camp, got boot camp update from [URL] for 64 vista, but there are 2 problems: 1st is the overheating issue, it is extreemly hot at the front edge where the radiating holes seems are, got speedfan and remapper software, doesn't work in vista. 2nd is the sound issue, there is NO SOUND at all. anybody having the same problems? anyone knows how to solve them?
Information:
MBP 471 2.8G
I just got my new 2009 13" MacBook Pro. I have installed Vista and loaded my Boot Camp drivers. I am trying to use the built in microphone for Skype. It appears in the Sound menu in the control panel as a working audio input and sound recorder works perfectly as well. However, whenever I select the microphone in Skype, there is no sound. The mic comes up as a Cirrus Logic CS4206A(AB75) device. Skype won't get any input from the mic. Does anyone know how to use Skype in Boot Camp with the new MacBook Pro hardware?
Information:
MacBook Pro
Windows Vista
Windows Vista Business operating System
Is there a way to close all but the active windows in Mac apps (I'm running 10.6.5). I often end up having 10 Safari screens open and it would be great to be able to close all but the current one I'm looking at.
View 5 Replies View Relatedi just downloaded GIMP and it uses multiple windows and i have to click the window once first to make it active before i can select anything inside it. is there any way to make multiple windows active so i dont have to click before using a window?
View 1 Replies View RelatedIs it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedI've got the latest MBP 13inch with Vista installed on Bootcamp. I've turned the sound all the way up and it's still very low. I've got all the latest boot camp drivers installed, I've tried viewing different videos trying to see if the video was the culprit, but unfortunately it wasn't. I searched around and I've seen others with this issue, but haven't found a fix.
I've watched the same videos in Leopard that I did in Vista and they're a lot louder.
Just recently I purchased a MacBook Air 13'' (1.7 GHz, 4GB, 256GB) with Lion installed in it and I have got an external monitor attached to it. It's been working really well for a couple of weeks, but in the last couple of days I have noticed how my browser windows, and only those!, for either FireFox, Chrome or Safari, keep dimming themselves while I am on other windows from other applications as if they were inactive, when they are not, because I am using the Mac still. And I can only get them to work again, i.e. loading Web sites, only after I click on them to activate them, which is annoying, because I may be on another window, would need to click on a link and it won't load on the browser window till I have clicked on it, on the browser window, that is.
I have searched in Google and found a couple of articles where it was highlighted how the problem may well be with the Settings under "Energy Saver" and I have got unticked in there for "Slightly dim the display when using this power source" and "Automatically reduce brightness before display goes to sleep" and still the same problem. Other articles suggested that I would try Caffeine and install it to get rid of the dimming of the screen, but even after installing I still have got the issues and I am, at this point, running out of ideas.
Info:MacBook Air, Mac OS X (10.7.3), 4GB, 1.7GHz, 256GB
I use MBP Snow Leopard 10.6.2 and use both Safari 4.0.4 and Chrome for browsing, and it is increasingly happening (on both browsers) that I need to click outside the active window (i.e. go to the menu bar and click on it, anywhere on it, to be able to press a link or a new tab buttons inside the open window). If I don't do that the active window buttons or links do not work, they depress or shade or do whatever, but do not actually do the function.
View 2 Replies View RelatedJust a quick rundown of what I'm trying to do here:I have a 1 TB external USB SimpleDrive hard drive that is currently partitioned into three partitions, two formatted with FAT32 and one formatted with HFS+ for Time Machine. I learned how to enable Mac OS X 10.6 Snow Leopard's NTFS read-write capability today and so I no longer need to keep my first two partitions as FAT32 (especially since I have files larger than 4 GB I would like to store on them). I have data on the first FAT32 partition that I would like to transfer to the second FAT32 partition once I have reformatted it as NTFS whereby I will then be able to reformat the first FAT32 partition to NTFS without losing my data.I have nothing important on the second FAT32 partition, but when I opened Disk Management in Administrative Tools in Windows 7, I found that the second FAT32 partition is currently set as the active partition of that volume. When I right-clicked and asked to Format that partition exclusively, I received the following
View 1 Replies View RelatedI upgraded my HDD, I simply used disk Utility to move data for the OSX HFS partition.
I tried to use Winclone to move but that didn't work too well, plus there is a unnecessary image step, so I ended up moving using disk utility again which again went fine.
The only problem is that rather than creating the partition through bootcamp assistant, I created it straight in diskutility and windows is not bootable.
I tried using fdisk to fix but that didn't work.
The partition table is GUID based and the windows partition is NTFS.
I'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedI just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies View RelatedI've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.