I just got my new 2009 13" MacBook Pro. I have installed Vista and loaded my Boot Camp drivers. I am trying to use the built in microphone for Skype. It appears in the Sound menu in the control panel as a working audio input and sound recorder works perfectly as well. However, whenever I select the microphone in Skype, there is no sound. The mic comes up as a Cirrus Logic CS4206A(AB75) device. Skype won't get any input from the mic. Does anyone know how to use Skype in Boot Camp with the new MacBook Pro hardware?
Information:
MacBook Pro
Windows Vista
Windows Vista Business operating System
I am running the latest skype on my macbook pro, everything is working except I can't hear the person talking, they can hear me fine, any ideas? I have been through the sound preferences on skype and the sound in system preferences trying things with no luck.
I've installed vista 64 on my new MBP unibody, and installed vista 64 ultimate under boot camp, got boot camp update from [URL] for 64 vista, but there are 2 problems: 1st is the overheating issue, it is extreemly hot at the front edge where the radiating holes seems are, got speedfan and remapper software, doesn't work in vista. 2nd is the sound issue, there is NO SOUND at all. anybody having the same problems? anyone knows how to solve them?
I've got the latest MBP 13inch with Vista installed on Bootcamp. I've turned the sound all the way up and it's still very low. I've got all the latest boot camp drivers installed, I've tried viewing different videos trying to see if the video was the culprit, but unfortunately it wasn't. I searched around and I've seen others with this issue, but haven't found a fix.
I've watched the same videos in Leopard that I did in Vista and they're a lot louder.
I recently installed Windows Vista Home Basic through BootCamp on my MacBook Pro. Everything works fine, except for the one thing that there's no sound... At the moment if i start something with sound, you'll see "the green bar jump up and down" But no sound... Tried to search for an audio driver, and installed one, (not sure which one it has to be though) But it didn't help...
Have tried uninstalling the whole lot and reinstalling it again, same thing happened, when i put in the Max OS x for the driver installation i recall it saying removing Realtek Audio or something, so search for that, but didn't help :/
I just got my motherboard on my MBP because I had the black screen problem due to the graphics card. Now I have problems w/ my sound. It keeps skipping after once in awhile for some reason. I installed the latest Realtek sound drivers. This happened with the original driver too. It plays music fine but every minute, it skips like a bad CD player. What's going on here?
My mac os x output sound doesn't work when i skype someone, they only can hear me type and make thumping sounds on the table but they cant hear me speak and when i speak she can't hear me?
i recently installed a copy of windows vista basic and noticed that i couldn't get sound even after i installed all the drivers on the boot camp cd, i also tried installing the realtek drivers but that doesnt seem to have helped, when i go to the control panel it says that i have a week sound coming out of the speakers but i cant even here that.
I need a good soundcard for my MACPRO 8core , the sound from the MACPRO sounds SUCKS and has no settings (Realtek HD - with optical output). I want to be compatible OSX as well as Vista x64.
Can be internal or external, I do not have preferences ... but i need a good sound
I installed vista on my macbook used Parallels, but my problem is the sound not active in the windows vista. Could anyone help me to activate the sound in my windows vista?
On the right hand side of my desktop when I download a program it seems to put an icon or doc on the right hand side. Like right now I have a skype dmg file I can't delete as it says Skype is in use, then right above that is a seperate skype icon that even if I drag to dock it still stays on the right hand side (like a copy), then I downloaded open office again and it put the install icon there (like when you open and you drag your program to teh applications folder)
I'm running Windows Vista Ultimate using Bootcamp. It runs fine with just a couple of anomalies.
First is that the sound quality is quite poor...almost like AM radio...I've tried installing the latest Realtek drivers but it's made no difference. I've stuck it onto "Rock" preset and that has improved things slightly but I was wondering if there was a proper fix for this?
Also, even though Vista see's that I have dual processors and correctly reports them (and I get two CPU usage graphs under task manager) applications such as dBpoweramp don't see it and run in single processor mode? Aga
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
Everything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
I recently installed windows vista (home edition) via bootcamp on my macbook pro.
Everything is running perfectly apart from the sound. I think it might an issue with the computers sound card. When I plug my headphones into the audio output jack, no sound comes through... it still plays out of the speakers. The sound is audible, but just barely.
What may be causing this? Are there any specific drivers I need to install?
I have reached this website after scrawling to find a solution on the internet. I hope someone can help me with this problem.I have a 4 years old G4 ibook (OS 10.3.7), and have been using it for internet, skype and foto-storage mainly.Situtation:Yesterday I tried to use the internet (Firefox browser) and skype, but the skype didn't work at all. Since firefox was not working properly either, I did force quit and restarted the computer. I attempted this several times until I could use both applications (never had any problems before). However, Skype didn't work, and in the end, I could not quit firefox at all. At last I did force quit again, and saw white screen with apple icon at the centre when restarting. No time-spinning mark, the apple just sits there.
Troubleshooting that I have done: I called up support center, and they told me that it's very likey that the computer is stopping at "'carnel" stage (I'm sorry but I don't know what this is). The possibility that it's got something to do with HD is 50/50, so I may have to send it to repairing service in the worst case. They told me to try using Disc Install CD1 to check/repair something wrong in my computer. So I followed the instructions and inserted the install CD and restart the computer with "c" key. The computer read the CD and Installer window showed up. As instructed in a manual, I used First Aid in Disc Utility, and tried "repairing disc". After a while it said "1 HFS has been repaired". It also said that Macintosh HD doesn't seem to have a problem", so I quit the disc utility and restarted the computer.
Against my expectation, the same white screen with apple came up on the screen and sits there with no other movements.I'm afraid of trying somethinig without further so I hope I can get the same story or ideas that someone here might have.
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I know that the Vista score thing is pretty useless, but I am curious what mine is. Is there a way to get a Vista score without having to actually buy and install that rubbish?
This started happening randomly earlier tonight, and I haven't managed to find a fix just yet.I was encoding a video file for quite awhile (I don't think that parts important, but I thought I'd include it anyway) and then I tried to play a youtube video. I noticed there was no sound, so I tried to up the volume using the Volume Up key on the keyboard. The volume visualisation appeared on the screen like normal (albeit a bit laggy), but the sound still didn't change, neither did I get the usual 'click' noise you get when you change the volume.I went looking into the sound options in the system prefs. only to find that the Output Sound device was headphones. For a test I plugged in some headphones to see what happened and, low and behold, the Output Sound device changed to the Internal Sound and my speakers were working again, but only with the headphones plugged in.
When surfing the net (like right now) or just letting it idle, my hard drive makes a slight "clunk" sound like the HD arm is hitting the edge of the case (or maybe starting up and shutting down?). There seems to be no loss of performance. I did a disk verify and everything is OK. Should I be concerned?
I have a person that sent along this video and it concerns me that a hard drive would make such a noise. It's unlike anything I've heard in a drive. He claims the original owner installed a new Seagate 7200rpm in the book, and that it mostly happens when loading a web-page on Safari.
Every time I look up "hard drive click" I get the SMS triggered "tink" but this notebook is not in motion and instead makes a "ca-chink".
For some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag. Any ideas?
when using iChat or Skype, only one speaker (R) works. I was told that it was designed this way to save battery power and bandwidth and that it was originally designed this way when most users were on dial-up isn't this called designing for the lowest common denominator?