I noticed that my GPUs fans (either ATI 3870HD or 4870) in my MP 1,1 are considerably louder nonewithstanding nothing CPU/ GPU taxing is running. Anyone else noticed this? Are the GPU drivers not finished yet or is it due SL keeping them under load for Open CL/ Grand Central?
View 1 RepliesMy PowerMac's (G5 Dual 1.8GHz procs) fans seem to run at a solid 4k rpm's regardless of what I'm doing, even with CPU usage set to low. I've taken the whole machine apart, cleaning it with canned air and such, but the problem just won't leave me be. The air coming out of the machine is ice cold, and the temperature readings I'm getting are about 86 degrees F for the CPU's and 70 for the HDD, so I'm not sure what gives.. Slot and Backside fans are running at 255 rpm, but the others are all 4k.
View 8 Replies View RelatedI've just bought a second hand macbook pro, the battery is dead which is easy to replace i guess but worse the fans are running constantly at around 6000rpm.I've tried resetting the smc and pram but that hasn't helped.I tried to run the hardware diagnosis but that freezes when it gets up to testing the logic board and i have to pull the power adapter to turn machine off.I only have the second of the two install dvds and machine is running os x 10.5.8
View 11 Replies View RelatedMy mac just blew out a lot of dust and now the fan is very loud.
Info:
iMac, Mac OS X (10.6.8)
What is wrong with this picture? The fans are running out of control constantly. This machine is sooo loud. The power supply was just replaced, which did little/nothing. Reset all ram/etc.
View 3 Replies View RelatedI need the thoughts and advice from your seasoned Mac people - I have 2 MBP's - 1 15" aluminum, one last years model 17" Unibody (with Black around screen). The 15 has run great since day one. The 17" was ok, but now is locking up and causing me to reboot, fans seem to run on high all the time, and it is very slow to react while using the OS, it gets worse until it locks up. I have upgrade to Snow Leopard thinking that that might fix it, but it has not.
When I got it, I restored from the back up of my 15" using carbon copy cloner. I only imported users and data such as pictures and music. Do you guys think that this is a hardware issue or a or should I back all my stuff up and then blow everything away and reinstall from the ground up with a fresh SL install?
When I called apple they tried to sell me apple care and told me that it was out of the full warranty and if I send it I would to pay for what was not under warranty. SO I am hoping that someone has seen this and has a fix that I can do without having to take it in.
I am having a huge issue with my wireless dropping once connected to my MacBook Pro (Model A1278) 13.3". Wireless connections are not dropping on my iPad/Laptops/Iphone. Running Leopard 10.6.8 and have updated everything. It started about a month ago and is inconsistent in terms of how long I stay connected, but never more than 10mins. Luckily I run an SSD and can reboot in 10seconds.
Info:
MacBook Pro, Mac OS X (10.6.8)
Anyone notice that the fans that used to run silent are now audible? It's not full-blast, but I can hear the fans on my 2008 8-core Mac Pro which is sitting on the ground next to me -- that I used to be so quiet I had to put my ear up to the machine to hear them. Just wanted to confirm if others are noticing this, or if it's just me. It's the same amount of noise under any condition. I've got a 2008 Mac Pro 2.8/octo, just installed Snow Leopard on release day.
View 19 Replies View RelatedThe fans on my 3.06 GHz Intel Core i3 imac run almost constantly and at high speeds. I have reset the SMC, fixed permission, and tested the disk. Also, I downloaded SMC Fan Control. Here are my current readings will the fans are blasting:
ODD: 994
HDD: 5577
CPU: 1200
Temp: 44C
Info:
iMac, Mac OS X (10.7.3)
After installing Snow Leopard, (10.6.8 In 2 GHZ Intel Core Duo) I have had a constant crashing issue. Usually every few minutes. I've lived with this since I upgraded.
[code]...
I've been very frustrated the past couple of days with my 13" MacBook Pro running OS X 10.6.8. Every Mac application (iTunes, Mail, Garage Band, Safari, App Store) becomes unresponisive as soon as it is opened, and stays unresponsive until I finally manage to Force Quit it, which still takes a considerable amount of time. When I use Google Chrome, however, I have no problems at all.
I've tried creating another account and trying to run the apps on that account, and I run into the same problem: App opens and seems normal for 20-30 secconds, or unless I try clicking a link or try to play a song, then the Rainbow Wheel appears for as long as it takes me to Force Quit. I've updated all the software for the apps and tried many restarts, to no avail.
Info:MacBookPro, Mac OS X (10.6.8)
My fans are constantly going on my g4 powerbook and the noise drives me nuts. I do all sorts of work - graphics (CS2), music recording, multimedia... but even when I am just not doing anything intensive the fans are on.
The fans are at full speed now and the temp reads 37C / 98F. I've used an icurve since I got the machine.I've put up with this noisy sound for a couple years now. One person said I need to clean the air vents, like dust is causing the noise. Does anyone know about this?
its a g4 titanium powerbook 867 mhz 768 RAM (ancient I know but it still works!)
Both my left and right fans are constantly running at 2000 rpm. They have not done this before, but over the last week I have noticed this issue. Heat does not seem to be an issue in triggering the fans. I'm so confused on why they're are constantly on now.No CPU hogging processes or high temperatures.
View 6 Replies View RelatedIt's literally unusable, sometimes will crash immediately after starting, sometimes after a few minutes....
the crash report is too long to post here, but if anyone can tell me which parts of it to post I can do.
I am not able to boot up. It crashes constantly and some time it boots as far as the screen but no applications whats so ever!
Info:
Mac Pro (Early 2009), Mac OS X (10.6.8)
I just experienced something totally weird on my Snow Leopard. It starts suddenly dropping in the free memory (green) in my activity monitor with around 10 MB per second and the inactive (purple) memory grows. And it doesn't stop until it hits 10 free MB.
[code]...
Info:Mac Pro, Mac OS X (10.6.8)
I've had an iMac for just about a year and over time I guess I just didn't notice but the machine always ran very quietly. At the same time the back of the computer would heat up so bad that it would nearly burn my hand if I left it there. Well last week I decided to upgrade to Lion from Snow Leopard and when I did the install failed and froze up the hard drive. I took the computer in to the apple store and they determined that it had to have a new hard drive installed because the old one (only a year old) had a physical malfunction (was broke). So anyway I have my iMac back and get it started up, backed up from time machine, and then finally get Lion istalled - and now all of the sudden I notice that the fans in the computer are CONSTANTLY blowing - I can hear them spinning and can hear the air venting out of the back of the computer - and the computer is STILL really hot on the backside of the screen. Â
So now I am wondering if the originial problem was the computer heating up and if that may have broken the otherwise good hard drive? Also now that I have a new hard drive - should I be concerned about the fans being on ALL the time? I mean they never go off. Even when I leave the computer for hours and come back to it and the screen is asleep the fans are STILL buzzing away at top speed. Here is the stats on the computer at the time that I'm typing this note - there are no other programs running than Firefox and Mail. Also - I don't know what the optical drive is exaclty - but if it's the DVD drive (superdrive) - there is nothing in the DVD disc driveÂ
Info:
iMac, Mac OS X (10.7.3)
My parents have an older 20-inch white Intel iMac that has run great through the years. But about a week ago it just started spinning the CPU fans up to 3500-4000 RPMs and it won't bring them back down. Istat shows that the CPU temp is around 90 degrees and the computer remains cool to the touch.
So it isn't overheating. My parents keep it off most of the time because they don't want to ruin it, but they're planning on using it in their business they're trying to start up. We've done some web searches and nothing seems to fix it.
My WiFi on Snow Leopard on my MacBook Pro is constantly dropping. I went to the Genius Bar about the problem and was told to reinstall OS X, which I did, and now, it just happens more often! The only way to get it to reconnect is to turn the airport on and off. Or, when I select my network, it asks for the password, which it was told to remember.
View 1 Replies View RelatedI recently did the mobileme to icloud swtich to keep my me.com email.Since Snow Leopard doesn't have an iCloud option and the MobileMe account option no longer works, I had to switch to create a new IMAP account with all of iCloud's server info.Ever since, the mac mail.app has been downloading messages practically non-stop.Every few minutes it will download 5000+ messages and growl notifications will fill up my screen. My mail folder is currently at 20gb and growing. I know there isn't that much mail data on the server as I originally had my mobileme limit set much lower. I tried deleting the account and creating a new one again, however it still happens.Â
Info:
15" MBP 2.53ghz 8gig ram, Mac OS X (10.6.6)
I have just upgraded my Macbook 2.2GHz Intel with 2 GB RAM and 250GB HD from 10.5 to 10.6 My Epson stylus photo R1800 printer has stopped working. I have downloaded the 'drivers & utilities combo package' from the Epson website, installed, restarted etc but still nothing being printed.
View 1 Replies View RelatedI have a USB audio interface... will it require new drivers to work with Snow Leopard?
View 3 Replies View RelatedI just installed Snow Leopard successfully, but it doesn't know my HP2600N network laser printer. It's not in the support document and the closest printer, a 2605N is supprted. But HP's site says "HP LaserJet - Software Information for Mac OS X 10.6" and "Obtain Software", but there's nothing there. Any idea of when HP will support the 2600N? (All other upgrades had no problem with the 2600N).
View 10 Replies View RelatedSL has included drivers for HP devices, but the scan features are limited (Preview or Image Capture.) Past versions of the drivers could be set to automatically open Adobe Reader upon scan completion. This no longer seems to be possible. Has anyone found a work around?
View 9 Replies View RelatedTitle says it all? Are new Nvidia drivers included with Snow Leopard? What about the ATI drivers?
View 1 Replies View RelatedAfter I installed Snow Leopard, I installed all of the printer drivers on the disc. It was a rather hefty size, over 1GB. Is there a way, manually or automatically, to delete all the ones I don't need? I've done a search, and a couple of places (possibly outdated) have pointed me to Library > Printers, and that all the printer drivers should be there. When I do that, I only see the application for my own printer.............
View 1 Replies View RelatedI went a couple weeks ok with the Scanner and Image Capture. And then kaput, it doesn't work. I thought about it some and it seemed to stop working after I did Software Update on March 17th, 2012. In that update was a "Digital Camera Raw 3.1.0" update. Which makes me very suspicious. Here is the error I get when I open Image Capture: So, it recognizes the scanner but can't do anything in Image Capture or the with the scanner buttons. I ran Software Update again, just to see if there was a new updated scanner driver but nothing came up. I really want to avoid using the manufacturer's SW drivers etc.Â
Info:
MacBook Pro, Mac OS X (10.6.8), 2.4 GHz Intel Core 2 Duo, 4 GB Ram, 250 GB HD
If drivers for your printer do not show up in Snow Leopard, and there is no option for a generic driver (that you can use until original ones arrive), then you might be in luck if you've got your Leopard disc handy. Insert your Leopard disc, and then click on Optional Installs. Then in the next window you might have to click on Optional Installs again. From the new Window, select Printer drivers. Select the appropriate brand, and then install. So really, we're trying to use Leopard drivers here, moved from your Leopard disc onto Snow Leopard. If you're in luck, usable drivers might show up in your System Preferences, or perhaps a generic driver that will work.
View 2 Replies View RelatedApple this week released new drivers for HP printers in its latest operating system, Mac OS X 10.6 Snow Leopard. The file, labeled version 2.2., is a 383MB download available from Apple. A number of HP printers, including Photosmart, OfficeJet, DeskJet and LaserJet models, are affected by the driver update. A complete list with numerous HP printers is listed on Apple's Web site. The update requires Mac OS X 10.6.1 or later.
Since the release of Snow Leopard, Apple has advertised new printer-related features in the operating system upgrade. Apple's Software Update will automatically provide you with third-party printer software and updates, "Nearby Printers" is a list of available printers that will appear right inside your printer dialog box, and you can simply connect a USB printer and the print queue will be automatically created.
Are the drivers updated/different on this new release?
View 7 Replies View Related