I decided I want to make my Mac HD one whole partition again but I don't know how to do it. I had tried using boot camp, but it was giving me an error. So I cloned my HD and now I've booted into the clone and am wondering how I can delete everything on the Mac HD and reformat it into just one partition. I tried searching but couldn't find it.
View 3 RepliesI'm planning to reformat the osx partition and I'm wondering if the bootcamp (or any other) partition will be affected. I'm not sure how it works... Or can I only reformat the whole hard drive?
View 1 Replies View RelatedI've got a Mac Pro (early 2008 edition) and I installed Windows 7 via boot camp. I no longer use the OSX on the main partition because I boot OSX on this computer from an external drive.
I would like to format the main partition (where my old OSX is) so I can use it for file storage from both OSX and Windows, but I'm afraid I might screw up the boot capabilities by doing so. Can anyone confirm that my Windows 7 boot camp partition will still boot successfully after formatting my old OSX partition to FAT32 (or whatever makes the most sense)?
I've always just read them, but I need specific help this time! I have a 1st generation 13" white macbook with 2gb of ram and a 2ghz processor. I upgraded my internal hard drive to a 500 gb hard drive, and when I did that - for some reason, the default partitioning table was an apple partition. Now that I'm trying to install Snow Leopard, it says I need a guid partitioning table. I've cloned everything to an external drive, and I'm ready to reformat the partition table of my internal hdd to guid, but disk utility can't unmount the disk.
View 2 Replies View RelatedA while back i decided to get bootcamp up and running on my macbook. that's all and good except i made it a 20gig partition, which is good for practically nothing. i would like to increase it to 50 gigs or so and my computer wont let me do that. So i've decided to go with a back up on a 500GB western Digital Elements and start over new.
View 2 Replies View RelatedDespite reading several post saying its not supported by Apple, i decided to give a try on installing Win7 on my MP 1,1 and stumbled through some unexpected problems. First I used BootCamp3 and split one of my HDs into winBC partition/Mac partition, then restarted Windows 7 install. I stumbled into the first problem which was the installer, after reformating the BC partition, displayed an error code, 0x80300024, a hard drive problem error in fact. The solution to this was quite simple, the BCpartition was on drive#4in slot #4, i had to move this drive to slot#2, then the installation runned smoothly. When rebooting and starting Windows for the first time (finishing the installation), I saw the Windows animated logo then the screen went black and hanged and lead to a BSOD. The message is 0x00000116, a graphic problem. I tried booting in safe mode but it says I need to let Windows 7 installation finish before booting safe mode and since i cannot finish it, beacause of that BSOD... So its a no go for now. I ran into instructions 'Instead, restart and press a key to boot from the Windows 7 disc when prompted. Rather than running the installation again, choose the little option at the bottom to Repair your computer. Decline any suggestions that pop up until you see a list of options with Command Prompt at the bottom. Choose that option. At the Command Prompt, type DEL C:WINDOWSSYSTEM32DRIVERSATIKMDAG.SYS to delete the default ATI driver, then close the window and reboot. This time, Windows should successfully initialise a more appropriate display driver, allowing you into the desktop.'at [URL:...]These instructions are for the BC problems on the Imac, not the MacPro. However i ran into the same problems, so i tried the same solution. Unfortunately, the Dos command does not work. I feel the installation is close at hand, and very possible, we'll see later for the Bootcamp xtensions, Has anyone stumbled upon the same problem/ or has a remedy?
View 24 Replies View RelatedI have a 320GB internal drive on my Intel Mac Mini. I tried to make a windows partition using Boot Camp. After I dragged the slider to select the partition size (100GB) and hit 'next' it didn't work. A message came up and basically said it failed. I don't remember what the message was exactly, something like "Verification failed. Some files could not be moved." But now, my Mini thinks it only has a 220GB drive. I open Disk Utility and I tried to reformat but it will only go to 220GB. It seems I lost the other 100GB.
View 5 Replies View RelatedI would like to reformat my previously partitioned startup drive into a single partition. (G4 dual 533 running OS 10.4.11) I have carbon-cloned the startup drive contents to an external fire-wire drive which I hope to re-transfer back after reformatting my original drive into a single partition. I have designated the fire-wire drive to be the new startup disc.
View 2 Replies View RelatedIs it possible to reformat a single partition of a disk w/o reformatting the entire disk?Or must one reformat the entire disk? In DU, If I click on the volume/partition in question, I do NOT get the tab “Partition.” If I click on the disk, not just the volume/partition in question , then I do get the tab “Partition.” Also, does using DU to secure erase a volume by overwriting with 0s, cause a format issue? Some details on my other post:Create a bootable clone using Disk Utility
Info:
iMac, OS X Mavericks (10.9.4), 4 GB RAM, Win XP Pro-Boot Camp
following the issues I had with not being able to install ANYTHING or do any software updates, i've decided to reformat and reinstall Mac OSX. First problem, when I boot from disc, it allows me to select language then says 'Mac OS X cannot be installed on this computer' so I completely format the hard drive and try again. No luck. Same message. WHY can't the Mac OS X be installed on this computer?!
View 4 Replies View RelatedI have never reformatted a mac as of yet so I'm not really sure how to go about it.
I've had my Powerbook G4 for around 4-5 years and I simply have NO CLUE where all the discs are that came with it. The other day I just upgraded to Leopard so I was wondering if it possible for me to reformatted the HD by using only that Leopard install disc?
I have a Sandisk m240 Mp3 player 1GB. I use it almost every day. I have had it since Sept 2008. I have had a few problems with it, but they were small issues that I could overlook. One of those problems is, every time that I put more than 100 songs on my mp3 player (it can hold about 240 depending on size of file), there would always be one song that came up as "unknown". I could play the file, but it would still be "unknown", even when I knew perfectly well that the file was ripped off a cd (that I own) to my computer (which plays it perfectly fine). That problem I was able to overlook because the file would still play.
View 2 Replies View RelatedI have a HD in my Mac Pro that is about 80% filled. I wanted to add another HD and configure the 2 as a RAID, Can I do this without reformatting the existing drive, or loosing my 80% capacity data?
The first HD is a 1TB and im looking to add an identical HD to make a 2TB drive.
I'm trying to reformat my MBP and I think I'm having a little trouble. This is the first time I've reformatted a mac. I put the OS X disk in, went into disk utility and did the erase. I then restarted, again booting on the disc and I've seen nothing but a white screen for the past 2 1/2 hours. The optical drive is making noises like it is reading, but I'm not sure if it can't read from the disk or it is actually formatting.
View 1 Replies View Related I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point.
I seemed to have had a keylogger or virus on my MAC. I had to reformat it. I used google, I am relatively new to MACs, and the method I used was inserting the disk 1 while holding down the option key. It is reformatting as I type this. My question, does it completely erase everything? I know with PCs, a simple reformat like this does not always remove all the problems.
View 1 Replies View RelatedI have a USB Tomato Flash 2 GB pen drive.
I have been using it up to recently when it has started to refuse to mount.
When placing the pen in the USB port I receive a screen saying that the pen drive had been removed properly without ejecting it first although I know that not to be the case and could only presume that the pen must have had a break in its connection with the USB port at some point.
Now every time the flash pen is inserted an error screen appears saying that the pen had been removed without ejecting it first.
What should I do to recover from this, as it seems I can not use Disk Utility to reformat the pen drive as it pops up with the same message and reports that the flash pen could not be unmounted when trying to reformat.
Many times in the past I have had to reformat USB drives once I have bough them so that they will work properly with my Macs and have never had any problems. I was just about to buy a USB online and thought I would check the Q&A for anything suspicious. Someone had asked the question; "is it possible to use this drive with a Mac", and someone from the store replied; "No, and it is not possible to reformat".
The drive is a Toshiba 500GB Canvio Basics USB3. Can some drives not be reformatted as this bloke seems to think or does he not know what he is talking about?
I have attached screenshots from the site.
I want to get an external hard drive for my ibook g4 (mac os x 10.4.11). I was leaning toward getting a WD My Passport Essential because it's compatible with macs and pcs. However a lot of the reviews I've read have said that WD external hard drives crash within a few months and that just sounds like a lot of stress to me. The Seagate FreeAgent Go has gotten better reviews so now I am thinking of getting it. However you have to reformat it in order for it to work on a mac. Anyone know how difficult this is to do or how to do it?
View 11 Replies View RelatedSo yesterday I decided to reformat my new MBP. I had it dual booting with Win7 and I just didn't like how hot my MBP got so I got rid of it. So I decided to reformat and pop in a fresh install of OSX, but I'm not sure if I reinstalled it properly. The reason why I say this is cause traditionally when reformatting my previous macs I would just follow the steps of the CD where then formatting the drive option was part of the step if I remember correctly. This time after putting in the OSX cd once it reboot.
I had to go to the utilities option select my drive to format or it would just reinstall the OS over top what was already there. After installing I noticed I had to rename my drive as well cause it was unknown. I never had to rename my drive before, so I'm not sure if I did this properly. So did I correctly format my MBP? Is there another way to do this to bring it back to exact factory specs? If not can someone let me know how to properly format my MBP?
I used to use an iMac as my main machine, but my macbook has now taken over as I was traveling alot. I now want to wipe everything off my iMac and copy my macbook across to my iMac, so it becomes my master computer. Basically I need to free up some memory and use the desktop to control my home AV requirements (itunes, iphoto etc). I use a hardrive with Time Machine to back up my laptop, so if I plugged this into a reformatted desktop would it turn it into a copy of my laptop?
View 2 Replies View RelatedI read in this thread that hard drives have to be formatted with HFS+ to work with OS X. I want to buy a hard drive on eBay that is wiped clean but formatted with NTFS; my question is this, how can I reformat the hard drive to work in my yet-to-arrive MacBook?
View 8 Replies View RelatedI recently bought a 640 GB Comstar external hard drive for my macbook, and it came out of the box formatted in NTFS. I know that if the drive was in this format, I could not use it with my mac. So I opened up disk utility and tried to reformat it into Mac OS Extended (Journaled), but disk utility showed an error and the drive wasn't reformatted. So I tried FAT32 instead, and it worked. The drive has been working fine now, however, I have realized a limitation of FAT32: the files can only be smaller than 4 GB. This is a problem for me, so I need some advice. So here is my dilemma: I need to be able to share the contents of the drive over a local network that has both windows and mac computers. (Users on the network only need to be able to read the drive, not necessarily write). However, I can't use FAT32 because of the file size limitation. I'm not sure how to format the drive so that I (using my mac) can read and write it, and users on the local network can read it. I'm thinking HFS+ (mac os extended, journaled), but will windows users be able to read it then?
View 4 Replies View RelatedI have a new external Hard Drive and I am trying to reformat it to Mac OS Journaled however It will not let me stating that "The underlying task reported failure on exit". However I am able to reformat it to MS-DOS and change the name of the drive but I am still not able to reformat it to MAC OS. Anyone have any ideas or should I give Western Digital a ring tomorrow?
View 1 Replies View RelatedI'm thinking about selling my MBP and before I do that I want to know which is the best way to reformat my MBP so all of my data is completely erased? I don't want the next owner to be able to see all my info and whatnot.
View 6 Replies View RelatedI am reformatting an internal hard drive in an enclosure to use as a media storage drive. I attempted to reformat the drive and partition it as a Mac OS X Extended however it will not erase the current volume and reformat. The volume on there currently is literally the HD with the old OS and Files and such on it, so am I missing a step in the reformatting process? Do I need to reformat as Free Space or FAT or what?
View 11 Replies View RelatedI have a 24" 2.66Ghz 4GB RAM iMac with 640GBs of internal HDD space, and a 2TB external drive I use to store stuff. About a month ago I tried partitioning the drive during an ubuntu install, and it messed the [external] drive up. I have had some more problems caused by the install (OS X didn't boot, didn't show up when restarting+alt etc.), so I had backed up my entire internal drive to my 2TB external one, and re-formatted my HDD.
Everything went back to normal, till I noticed I have ~600GBs missing from my 2TB drive. I tried iPartition and it shows that I have 20KBs or something like that that are used by the filesystem, and no other partitions (so my drive has one partition and everything's supposed to be there). I'll provide you with a DW log shortly. What can I do to get my 600GBs back?
I'm new here and am having trouble with a new WD 2TB Element external hard drive. It is the first Element HD I have purchased. I needed a larger HD to back up all my music and video. I bought it brand new and plugged it into my 13 inch white Macbook and found out that it has to be reformatted before I can write to it. I have bought and used several other WD HDs in the past and never had to do this. I could find no directions on ho to do it in the scant instruction booklet and have looked all over online but have not found any help, so I am hoping a vet here can lend a hand. I really appreciate any help I can get.
View 6 Replies View RelatedTrying to reformat my 2007 imac. Currently have: 10.4.11 tiger with a partition that contains windows xp. I use bootcamp and parallels, etc with this system. Want: To start fresh (after saving my programs and files etc.) and wipe everything and reinstall. I have an upgrade to 10.6 snow leopard and I still want a windows partition but don't have my windows disk/key anymore. How do I go about this? I need allll the instructions b/c I have no clue at the moment and am not that computer saavy. I'm assuming I need to buy Windows again? And then reformat/ install my 10.4.11, and then use the upgrade for 10.6?
View 1 Replies View RelatedIs it possible to reinstall Lion like the following?
Download os x lion from app store
Burn the .dmg to a disc
Insert disc into Mac
Boot, holding down C (?)
There are several types of dvd's. One i found is dvd +r, the other one was dvd -r.Whats the difference? How do i boot up with the dvd which contains the os x? Holding down C, like the real disc? My original disc is broken after moving my computer while the disc was spinning. It got scratches from it. My computer won't boot for some random problems I know.
Info:
MacBook, Mac OS X (10.7.2), 2.26 ghz, 4 gb ram
