On an G4 iBook I was wondering what advangtes running Tiger over Panther are. I maxed out the RAM to have a total of 1.12 GB. I am running Tiger now but it slows down if I fire up more than 5 apps at the same time. I was thinking Panther would run better. All I do is internet, email, word processing, spreadsheets, listening to music and playing old games.
Is an "Erase and install" really that complicated. I don't have enough free space on my HD to do an "archive and install". I want to keep all my old Apps but dont have any of the installation CD's as all the apps were all on the computer when its was given to me.
tell me which version of the MacMini is able to run either Panther OS and which does Tiger.
I'm thinking of buying either a used or new MacMini for one purpose. I need to set up a local test webserver, I don't wanna do it on my main system cause there's a chance it'll make the OS unstable for general uses.
How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
since buying my mbp, my powerbook has become pretty much redundant for anything other than word processing and internet use, at the moment its super slow because it has virtually no hd space left, so i have backed up, and want to reinstall the os, clean it up a bit and get it running the internet superfast to use when i am travelling, keeping my mbp on my desk for the rest of the time. I have a copy of both panther and tiger that came with the powerbook (i bought it a week before tiger came out and apple sent me it for free!), but it is currently running panther. now its a stock powerbook 12" 1.5 Ghz with 512 ram, and it wont need to run anything too complex: just word/safari/idvd/itunes, however it would be nice to have dashboard (i have got used to it on my mbp), but not essential.
I don't want to spend any more money on this thing, but want to know which would be faster...i have heard that tiger puts more strain on ram, but also that powerbooks run faster with tiger than with panther...which of these statements is true?
I might be getting a iMac G3 (for surfing and maybe itunes) and I was wondering if I should put tiger or panther on it? I had tiger on my iMac G4 before it died and I loved it. I was used to leopard before though (my imac G6). I don't know the processors or anything yet... but since I'm getting two of them for free I'm not really complaining. How much iMac G3 suck. I think they are adorable
I am attempting to load tiger onto my 12 inch PowerBook G4. The installation cd runs up to the first part when it asks you to restart. Then after the restart it up and comes up with a error message 'unable to find driver for this platform: "PowerBook6,4".' This is not the complete message as it is to long to type out. I have tried every thing I can think of fsck, repairing permissions, removing an after market ram and I have tried lots else.
I am in the process of buying a hard drive for a PowerMac G4 that i just purchased. The computer doesn't have a DVD drive, just a CD. I have a copy of Tiger that could be installed but I would need a DVD drive. Would I be better off buying a cheap copy of Panther online somewhere and just using that, or buying a DVD drive and installing Tiger? Or finding another way to install one or the other on my Mac?
I'm not a conspiracy theorist by any stretch of the imagination, but I've had a chain of events that leave me wondering what's going on:
First let me tell you my system: Dual G5 1.8GHz 3.5GB RAM.
Last year I could download and watch 1080i HD quicktime videos ( trailers from Apple's site ) without problems, playing at full resolution with no noticable frame dropping.
Then after a quicktime update ( don't remember which ), the performance fell down horribly to just a few frames a second for HD movies ( lower res videos still played fine ).
The next quicktime bumped up the performance back to something reasonable where I could at least "kind of" watch an HD trailer, but still there were sluggish points on most videos.
So last week I finally pony up for Leopard. Now I can watch 1080i trailers again without any problems and not a single frame drop that I notice.
What the heck??? Is this because of Leopard supposedly offloading some of the work to the video card? I think I read that it does that right?
I have actually noticed better performance all around with Leopard but most obvious is the graphics performance ( minimizing windows, dashboard, webpages etc ).
I'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
I'm pretty satisfied with the Marware cover, although it can be a little frustrating when typing quickly..I'm wondering if I should go back, return the Marware cover and pick up the iSkin.
So, for those of you that have any of these in comparing..which do you think is the best?
And yes, I did search and am aware threads like this exist..but I couldn't find any comparing all three, only iSkin vs. Moshi.
I'm trying to decide which product to buy and I was hoping for some advice.
First and foremost I want a device so that I may transfer my VHS tapes to DVD.
Live TV recording is secondary but for the price, I'd like to find the device that suits me best so I can continue to use it after i've transferred all my VHS.
Here are my concerns:
1) I'm going to be moving from the US to Ireland in a couple of months (not sure for how long, could be years+) Obviously there's the whole NTSC vs. PAL, ATSC vs. DVB.
I know with EyeTV 250 it's either or, any ideas if buying some sort of converter is an option (prices, quality)? If I bought just a PAL one, would I still be able to convert VHS or would it be completely unusable in the US?
2) I'd like some sort of HD/Digital abilities. From what I can tell TVMax is analog only and Blackmagic may also be but I can't find more specs on that.
Does this mean they'll be useless once the US undergoes the conversion?
So as of now I'm leaning towards EyeTV 250 but the question are there any forseeable problems with using a PAL to NTSC converter or using a PAL EyeTV in the US just to convert VHS.
So I have a 1.8ghz dual G5 with 3gb of ram for work. I mainly work in Adobe CS and do a far amount of Photoshop work. At any given time I may have all of Adobe CS plus Office and a few other apps running -- and a gazillion fonts. Went to the store and saw the new 24" iMac. How would a new iMac compare to my late '04 1.8DP G5? On that same note, how would a new MacBook Pro compare to the above?
I am planning on purchasing a new display for use (currently) with my imac. I am completely torn between these two models, and cannot make a decision. Any thoughts? I like the Dell because it is LED backlit, thus good blacks and little to no backlight bleed. But I like the Samsung because of the (supposedly better panel and (supposedly) better color reproduction. I like the simplistic look of both of them (though they could look a little better ) so I'm not sure which one to buy.
I ran some tests on my 2009 Quad Nehalem to try and determine what was up with the triple Vs dual memory "brouhaha".
I posted the results as a new thread because I think it will be useful information for a lot of quad owners, but it was originally going to be a reply to this thread: http://forums.macrumors.com/showthread.php?t=735845
Here we go. Tesselator suggested 3 tests that could show the differences in speed between triple and dual channel bandwidth.
Quote:
As one idea I would maybe try creating a few very large images (16-bit, blank white, blank black, gradient fill) and then duplicating and deleting that layer repeatedly a few hundred times.
So I did them, 10 times each. I could have gone on, but the results were very very stable after the first 2 attempts.
Set-up: a 40Mpx, 16bit image (8000*5000). First test it was simply filled white; second test: black; and third test a black to white gradient. I added a fourth test, using a real (photo) 12Mpx RAW image from my Nikon D300.
I created (took a while!) an action with 350 repetitions of "duplicate layer" and "delete layer", followed by a red fill to let me know the action was done. The same action was used in all four tests.
The computer was restarted before each of the four tests, which may explain the irregularities on the first 1-2 attempts. Nothing else but PS4 was launched.
The results are interesting:
We can clearly see that the simple white and black fills show a speed difference of around 10%.
We can also clearly see that this difference disappears when a more complex image is used. The use of more complex images represents a much more realistical use of PS.
To make things even more realistic, I also tested RetouchActions's speed test on my own 12Mpx image. I use nearly all of the operations of that action on a daily basis, so it's a lot more representative of the work I do on PS.
Here are the results:
The results are clear: 11% increase in performance using 8GB of ram (Vs 6GB) when working on a 12Mpx image.
Added info: number of page-outs after running the 10 test series (after about 45 minutes of intense PS work): -17K when using 6GB (1.7K page-out avg). -10K when using 8GB (1K page-out avg).
For me the results are definitive: unless I plan on working only with full black or full white images (not even black and white!), having 8GB is better, even when working on smallish 12Mpx files. I imagine the differences would have been even greater using bigger file sizes of actual complex images.
What would now be interesting: someone with a 2009MP Octo doing the same tests at 12GB and 16GB.
Two short questions on which I really need an answer. This academic year, I'll be writing a lot of papers, but most specifically, I am forced to use SPSS (statistical software package for social sciences).
Will I really need the 2.93 over the 2.66 and notice the improvement?
Same goes for the gfx. I like full-hd 1080, I'll be in InDesign, and use Logic Pro. Will I need "slash" notice the 4850 over the gt130?
Also, are the "hang-ups" with the 4850 truly fixed and does it indeed run a lot hotter (inc. really that more noise) than the gt130?
Ok so basically today I got a second hand MacBook and the broad who owned it before me thought it was a good idea to wipe the entire thing so I would have to reinstall the panther os x thing and it is all good til I have to do the second disk.
I usually "repair the Authorisations" with Disc Utility about once a week.But digging into my Apps I find that I do have Onyx installed... as it came with the Mac I assume the version corrisponds to Panther...
Be gentle and descriptive im new to MACs and OS X. Just bought a MAC second hand and re-installed the operating system with the discs that came with the MAC originally. The re-install went well. I want to install Mozilla Firefox. I download the file and it fails to mount. This is fresh install.
Also using Safari I use Google to search and it crashes Safari??
Im'e trying to install the o/s on a G4 with a clean hard drive the drive's been wiped of data and that's all It has not been formatted The screen says select destination volume but is greyed out i can't select anything Is the problem the fact that the hard drive is not formatted This is my first mac so don't know what to do.
I have a Dual G5 PowerPC with OSX Panther running. The machine runs like a champ for what I do with it. I would like to upgrade to the newest Adobe CS4 because I still use the first/original Creative Suite. BUT, is CS4 at all compatible with OSX Panther, or will I need to upgrade OSX? Also does anyone suggest upgrading to OSX Leopard from Panther; anything to be careful of. I am also concerned about Leopard's compatibilty with my current peripherals (few years old scanner, printer, drawing tablet) The primary use of this machine is for Graphic design, flash, web, and photo proccessing.
Is there an app out there that will allow me to install Panther while using Leopard? I thought I heard of one. Sheepshaver installs OS 9 and Parallels can only install Leopard Server
I'm running Panther 10.3.9 and I've made a mistake with Safari. For some reason I thought it would be a good idea to install a new version of Safari, even though I hadn't been prompted to do so. Safari wouldn't then open as I cannot run the new version on 10.3.9, but it had deleted my old copy in the process. I tried dragging a version of Safari 1.3.2 across the network from an identical computer running 10.3.9, but Safari would still not open.
After 5 years with 10.3.9 on an iBook, I've bitten the bullet and bought one of the new iMacs. The transfer has gone fairly well, but I'm having trouble moving my address book and keychain data across to the new machine.
They didn't come across using the Migration Assistant: the Snow Leopard Keychain won't accept anything exported from the Panther version. If I export the address book as V-cards from the old system (the only means of export, the new systems asks me whether I really want to import n cards, but after I say yes nothing appears in the bbok.
It's al very frustrating, (and not very Apple-like!) I'm on the verge of doing the whole thing manually, one address and one keychain entry at a time, which seems quite daft.