OS X :: Moving Files From IMac To Maxtor Harddrive?
Jun 7, 2009
The case is this: I have a 200 GB Maxtor harddrive onto witch i want to copy all the video, zip and other files from my imac. I have allredy copied most of them by using a memory stick and taking it over to a PC and from there over to the Maxtor. But the files i have left on the mac is to large for the memory stick.
The Mac can only read, and not wright the Maxtor. But i just can't understand that i can just copy the files from the Mac to the Maxtor via a PC, but not directly?? isnt there a way to copy the files directly to the Maxtor?
I don't know much about filesystems but on my imac it says someting with RAID and aufofs. I have also understood that i can format the Maxtor to FAT-32, but some of the files are greater than 4 GB, so that wont work right?
I'm new to Mac (two days) and would like on moving mybook harddrive icon from the desktop to the dock. I've tried right click, preferences, but don't see preferences.
I have a 4 yr old macBook Air with solid state disk capacity 120 GB. It has loads of music and about 12000 photos on it and the disk is getting full.I also have an iPhone 4s.I am treating myself to a new iMac with 1 Tb drive.I guess it would be sensible to move most photos and music to the new iMac.(I have a 500Gb hard drive I use to back up the macAir)
Re photostream - does it store photos on the Macbook itself? Can I set up my phone to send photos to the iMac instead of the current macbook air? How?How do I keep duplicates of some of the photos on the macbook?
10.8 and 10.9 become a headache copying/moving files/folders between disks. After download selected images to my Imac from cards I used to move all of them to a local network backup disk (attached to a linux OS)
I don't do this anymore from a year ago: annoying warnings like "the file ... is in use" (not in use, even had been downloaded) stopped move; repeated procedure with the rest of the files included the 'used' one, over and over again and finally, after 12 times or so all files had moved. 100 files to move, stop, 80 files to move, stop, 60 files.......
Same problem moving files between disks attached to the same iMac.'You have to provide an admin password...." -> Continue Password set and again 'File ... is in use' (not in use, it is just backup file)Reseting the Mac. Worse
.'You have to provide an admin password...." No 'Continue' option, just only 'Ok' that will do.... nothing.My solution: Terminal: sudo mv source target
I guess Finder has been tought to make life easier, isn't it?
I am planning on buying the new iMac, but i'm not sure how to move my documents, music, and photos to it. i do not own an external hard drive and i'm not willing to pay for the one-to-one class. is it possible to move the information between the panther os and the new snow leopard? what are some ways that i can move my files?
I have an iMac 2011. Processor: 2.7GHz Intel Core i5/ Memory 4GB
OS X Yosemite, version 10.10.1
After I change my OS from Mavericks to Yosemite, moving files between folders is very slow.
For example, if I move one jpg file in Desktop to Pictures folder (or just any other folders like Trash), it takes about 3 seconds.
When I was still using Mavericks, it made that Ding sound and transferred files right away. However, now, although it makes the Ding sound right away, the file is still there for 3 seconds.
I tried to clean up my mac using many apps, but they never fixed this problem.
I've also tried what I saw on this one thread. OS X File Transfers Very Slow
Go->Connect to Server then type "cifs://server-address" but it says there is a problem and did nothing. (maybe different issue)
My 500gb iMac (purchased April 2010) is about at capacity. 350gb of space is taken up by home movies (.mov) in iMovie. I bought an external hard drive and have moved about 200gb over to that drive.
After transfer, I deleted the original Events off iMovie and emptied the trash. I checked in both iMovie and in Finder and no longer see those files present on the Mac.
I thought this was going smooth and everything worked perfectly, but….when i went to check how much storage space i created on the Mac, the amount of available space barely budged (i moved 200gb of data to the new drive and i created about 30gb of space on the Mac).
Are these "deleted" files hidden somewhere and I need to go delete from somewhere else? How do I make sure I get back the storage that i need?
I am a rookie in Mac. I have a lot of multimedia which I store on external harddrives. Recently I have experienced my iMac freezing on me, specially when I am accessing the harddrives using my frontrow application. Eventually I got a database error when receiving mail to my Entourage. It was suggested that I repair permissions using the disk utility. This I did, however it never actually repairs anything, it just lists the stuff where the permissions differ. Anyway, straight after I 'repaired' permissions, my harddrive showed empty. No files left!!! 1TB data gone .
the way I understand it, it is a possibility that the file that lists the addresses of all the files on the disk may be the one that was wiped. I am hoping the data is still there and that someone has a nifty tool that will sniff it out for me.
I have an iomega external HD. When ever I try to transfer files from my mac internal HD I get the message "the Item could not be moved because "iomega HDD" cannot be modified." This HD works fine with windows, but is doesn't seem compatible with my mac. Any way to fix?
I have shared me external hard drive in the System Preferences, but when I try to copy something from my windows pc on it I can't copy. I can read all the files but just can't put stuff on it. It says I don't have the rights to that. I have found that when I try to let me external be read & write by everyone in the system preferences on my mac I can not change it.
transfering files from my MacBook Pro to my external harddrive. I want to transfer my "Music"-folder to the external harddrive, but I get an error which says (translated from Danish to English): "The action can not be completed, because you do not have permission to access some of the topics"
I used to use an application that was able to list every file/directory on my hard drive and list them in order of size. I edit large MP2 video files and sometimes it's hard to remember where they all live... this tool was useful because MP2 files are so large, they often are the biggest files on my machine.
Saw today in Lions new layout under "This Computer" that my harddrive contains 147GB (out of 320 GB) of movies.
Is there any clever way to track those movie files.
The movie files are probably spread all over the computer. I have for instace made a great deal of Final Cut clips
that tend to be saved in several copies spread in different folders. Besides that, I probably have film and film clips in every imaginable file format that have been saved and forgotten through the years :-) (my iMac is from -07)
Today i was finishing a 7min HD Video Project for my class, on a mac tower, when i got the I/O error message while exporting it. It got worse from there. Untill today i have had no problem viewing/opening/editing files from my harddrive.
Now, i cant even open the FCP project. It says final cut pro quit unexpectedly while using the kgcore plug-inWhen i try to watch a quicktime file, the movie will play for a few seconds, then freeze and force quit.I try to copy any file to my desktop and it says The Finder cant complete the operation because some data in(filename) cant be read or written. (Error code -36)
I ran disk utility to verify the disk, and it says that everything appeared ok.I also ran disk repair, and it also said nothing was wrong with the harddrive.I have tried to do all of these things on 4 different computers today, 3 towers and a Mac Mini.All the same results, down to the exact second and mb of the attempted transfers and watches.
So i've just started using Mac and i've downloaded a few tunes into the downloads folder and then moved them to music. I cant remember what the file names were so can no longer find them. Is there a way to organise the files in the music folder to show the most recently added? If not what do you recommend
Unable to Use TIme Machine to backup a new Western Dig external 1 TB drive. It is connected through an adaptor to my Firewire 800 using a Firewire 400 with adaptor. I cant dismount the drive to reformat it to MAC using disk format utility.
It is a B&W G3 Desktop rev 1 350 mhz 1GB with 6GB Quantum startup volume with 9.2.2, and an aCard, Maxtor 120GB that is going to have Tiger on it.
Two OSs on Two Hard Drives and one OS on each hard drive on one apple desktop.
The hard drive is connected and the Apple System Profiler on 9.2.2 6GB startup volume detects the aCard and the Hard Drive, but when I select which hard drive to install, there is the original hard drive, and nothing else.
How do I install 10.4 on the Maxtor Hard Drive? Is there a key combination that I have to hold down while it is starting up?
I just got my first new mac, and HD etc. When I was putting everything together I got stuck on my Maxtor Basic HD, it didn't have much info on how to install it, it just told me to go to disk utility, so I did..to reformat it. I clicked on the HD on the left and click the TAB erase at the top, then went to security options, and clicked on ZERO OUt Data and then I got confused on which format volume to click it on.. atm its on : MS-DOS (FAT), so I changed it to: MAC OS Extended (journaled), and clicked erased. So I waited for around under 9 hours. Then when its done it says: the following disk encountered an error: file system verify or repair failed!
I have a Maxtor USB 500GB External Hard Drive thats been running fine as a Time Machine Backup Drive. However it now fails to mount. I do not receive an error message about this failure it just doesn't appear, the drive does not display in the Disk Utility application either. It all seemed to start happening around the time of the 10.5.8 update, then about a week ago it just doesn't mount any more. The drive seems to be making the usual drive sounds. I have tried the following.
-Restarting the computer with cable plugged in & out -Resetting the PR RAM -Attaching the drive to another computer, problem remains -Downloaded File Salvage, disk doesn't appear -Looked on the Maxtor website for new drivers, no updates I can see -Googled the problem loads, no results -Asked a friend, no result
open my external hard drive attached to my Mac Mini (Tiger 10.11). Been working fine for about a year. It is a 500GB USB driven OneTouch and has about 300Gb of work saved on it. Suddenly, no drive appears on my Desktop.
It shows up in Disk Utilities and can be mounted and unmounted. It shows as /Volumes/Maxtor/ in Disk Utilities. A search in finder in Go to Folder for /Volumes/ reveals an Alias of "Maxtor" that I can pull up in Get Info as a "Wheel" group file, but can not change anything like permissions, etc. Tried authorizing permissions in Terminal - no luck. Does not show up with a Terminal ls search. Tried disconnecting and reboot umpteen times. Tried plugging into various USB ports. Tried on my MacBook Pro.
Quick question. I have an imac running leapord. I also bought an external seagate harddrive to use with time machine. It was working fine for about a month then my mac stopped recognizing the external drive. Any thoughts on what has happened or did I just end up with a faulty external drive?
I have a Maxtor One Touch 4, 250 GB external hard drive, used for PC backups with about 230 GB of data. I have connected it to my iMac, using the USB 2.0 interface cable, and I can see all the folders and files on the drive through Finder. I can even open them up with Office for Mac, etc. However, I want to migrate these files onto my iMac using Migration Assistant, but Migration Assistant cannot find the drive it seems. It just sits there spinning forever, and never finds the drive.
I was thinking that if i bought an external MOBILE hard drive (un-powered) i could take it with me sometimes when i need it in UNI (in Lectures where there is no power source to plug drive in), but also attach it to the mac and since it is un-powered and mobile time machine will work without needing external power.
I have a new hardrive and I'm using the time machine with it. I have a couple old hardrives with old but important stuff on it. I want to consolidate ALL my files, etc into one (new) hardrive. How do I select all the files in my old hardrive and transfer them to my mac, and then eventually to my new hardrive?
My grand father is the king of all pack rats as he still keeps all his taxes and personal files on a powermac 600/66.
He wants to move the files off that computer and onto one of his newer macs so that the older powermac can finally be laid to rest.
The power Mac has a floppy drive which I am hopping I can use in tandem with a USB floppy drive for one of his newer macs so that no data is lost.
It seems like a viable plan I just want to know what issues I might run into as he is convinced the only way to transfer the documents will be via printer to scanner.
I like to keep my Applications directory tidy, so I have my software in several sub directories. I haven't had any problem moving the .app files around until I installed Virtual Box. It installs under Applications without asking anything, and if I just plain move the .app file somewhere else, the program doesn't run.
So, coming from Linux, my first instinct when a sw doesn't work from it's GUI launchers is to try run it from command line to see any potential error messages, and sure enough:
VirtualBox: supR3HardenedVerifyDir: Failed to open "/Applications/VirtualBox.app/Contents/MacOS": No such file or directory (2)
So my question is - as I'm still not too familiar with these .app bundles - based on that error message, which file should I look for to try and edit the hard coded directory paths ?
For several years I have published a newsletter for the local Lions Club using Publisher. I currently have a partitioned hard drive with my Publisher and newsletter files on the Windows side of my MacBook Pro. I constantly run into frustrating problems trying to move photos, save files and print across platforms.
Is there a Mac program that would read my Publisher files so that I could work with my same template on the Mac side? Will Mac Office 2011 recognize Publisher files produced on the Windows side?
