Quick question. I have an imac running leapord. I also bought an external seagate harddrive to use with time machine. It was working fine for about a month then my mac stopped recognizing the external drive. Any thoughts on what has happened or did I just end up with a faulty external drive?
View 17 Repliesmy mac book pro is not recognizing my WD 500 GB external hardrive. I checked and double checked to make sure the external was mac compatible before I bought : and it was. It also is not recongizing an WD external hardrive I borrowed from a co-worker. Here is what I have done and checked so far.Â
- I checked to see if the externals worked on other Mac Pros( just to double check mac compatibility)-Â they showed up on on 4 different Mac books.
- I checked to see if there was something wrong my usb ports. So I incerted my 4 GB flash drive in the USB port, and then my co-workers 4GB Flashdrive- My computer recognized both the devices.
- My computer was very full ( that is why I bought a bigger hardrive to back up my files) so I thought maybe there just wasnted even enough free space for my computer to recongize the devices. So I freed up 70GB of hardrive space on my mac book. - still nothing.
- I also checked to make sure I had the suggested software updates to run the drive, before I bought it. Â
Info:
MacBook Pro (15-inch 2.53 GHz)
I have a Seagate Freeagent Go 750GB that my Mac won't recognise. I can't afford to lose the contents. The drive was recognised until recently and is still seen by Disk Utility, but won't display a desktop icon to access the contents. I've run Disk Utility many times and it won't fix the problem. I've followed all the steps in the knowledgebase articles. I've tried to use Seagate's diagnostics software, but without success. I've followed all steps in their knowledgebase.Purchased 26 May 2008, S/N 5QD375A2 P/N 9NK2A6-51 (though difficult to read as very small)(OSX 10.5.8, 2.16 Ghz Intel.
View 7 Replies View Relatedi am new to this forum and everybody seams nice, but i have come over a problem, my ibook g4 1.33ghz, 512 ram, 40 GB harddrive, 12.1 inch runing leopard 10.5.6. is now not verifying my external harddrive i have a seagate freeagent pro 500 GB. it was working fine for almost a half of a year. i know that the harddrive has a 5 year worinty but i dont want to lose all my stuff on the harddrive because i have most of my stuff on there like all of my photography stuff. and it asks me if i want to verify the drive or repair the drive and i tryed both of them and it says it failed both so then its telling me to back all of the files up and erase the disk and i dont have anywere to put all my files because the internal 40 GB harddrive isnt enough space to back it all up. so what i would like to know if there is another way to do this ?
View 10 Replies View RelatedUnable to Use TIme Machine to backup a new Western Dig external 1 TB drive. It is connected through an adaptor to my Firewire 800 using a Firewire 400 with adaptor. I cant dismount the drive to reformat it to MAC using disk format utility.
View 3 Replies View RelatedI was thinking that if i bought an external MOBILE hard drive (un-powered) i could take it with me sometimes when i need it in UNI (in Lectures where there is no power source to plug drive in), but also attach it to the mac and since it is un-powered and mobile time machine will work without needing external power.
View 2 Replies View RelatedSo today, i got a warning message from time machine saying it's past 10 days blah blah, so i plugged it my external harddrive to back up my stuff. At first, it recognized it and i thought it was backing up since i saw that logo turning counterclockwise.
Then when it stopped turning, i just close the lid of my MBP (btw running leopard) to eat dinner. When i came back and opened the lid, it says "improper removal of blah blah" but it was still plugged in. so i unplugged it.
Later, i saw that the exclamation mark is still there inside the time machine logo, so i plugged the hd back in but now nothing shows up.
i have a simpletech hard drive running MBP leopard, the latest.
My Mac Mini cannot recognize the Seagate 80GB Momentus that is inside it. It saw it for a little, and I went through the whole Leopard installation and then it said at the very end that it couldn't complete the installation and now when I try it can't see the drive at all. I tried reseating it - how come no one's talking about how there are four more pins on the seagate than there are ports on the mini.
View 3 Replies View RelatedI got my new imac running leopard few months ago. I was using my WD 500GB external HDD as my backup disk for time machine etc and was working great till a few days ago. Now,when I connect(with firewire 800)- it does seem to start up but does not appear on the desk top.This happens with the USB connection as well.I first noticed the problem when time machine icon(clock) just kept rotating as if backing up,but it just kept going. this happened several times,so I restarted the imac,plugged/unplugged the WD without any joy. Now it does not even recognise it or appear on the desktop. I have checked all connections etc and all seem ok. I connected the WD to my ibook running 'panther-10.3' and it recognises it(via usb),so I presume the WD is working. The imac recognises another external HDD and appears on the desktop. Not sure what to do next,not really keen on trying a complete new reinstall just yet,and that may not even solve my problem. Otherwise the imac seems to be working all right without the WD connected to it.
View 2 Replies View RelatedI have a late 06 early 07 intel imac. My problem is I recently purchased a 1 tb Seagate external hd and the imac recognizes some folders and their contents, like pictures and a couple others but will not recognize the contents of my movies or music folders. Now I copied all of my files from a wd elements 500gig and that worked perfectly with my imac. just can't get to my music or movies. Now, I can plug the seagate back into a windows pc and it works perfectly, so i know my files are there, but love to use my mac exclusively. Also running 10.4.11
View 8 Replies View RelatedYesterday I reformatted my Macintosh hard drive, partitioned it, installed Snow Leopard on one partition and Windows 7 on the other. I installed all the drivers for Windows 7 from the Snow Leopard disc.
When I plug in my 1TB Seagate external hardrive it's not showing up in Snow Leopard or Windows 7. Not even in Disk Utility. I tried plugging the external drive into my Windows laptop and a pop-up comes up saying "USB Device Not Recognised. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it." I think that this may just be because it's formatted to Mac OSX?
The hardrive had all of my photos, videos and music on so I hope it's salvageable. I find it hard to believe that the hard drive malfunctioned at the same time I reinstalled the software onto the iMac.
I have one hard drive that is readable and writeable on my mac desktop but read only on my mac air. I am trying to transfer all files from a couple external hard drives onto a new larger back up drive so I do not want to lose any information by reformatting.Â
Info:
iMac, OS X Mavericks (10.9.5)
Using Migration Assistant, I'm trying to transfer back-up files (whole system) from my Western Digital, External HDD to a new-to-me iMac which I've just purchased used. The External HDD has all my files (hopefully!) from my recently stolen iMac. As you can imagine, the circumstances are a bit unexpected and unsettling.
I've followed Apple's instructions for using MA with an external drive, but get hung up like others before me when it comes time for my new (used) computer to locate the disc from which to transfer the files. I've read the replies to others who have posted with similar difficulties using Snow Leopard, but resolving the issue seems to be just out of reach. Â
Original computer is now unavailable (stolen); it last ran on Snow Leopard, 10.6.3 to 6.8.New computer is used, and also runs on 10.6.8.Both computers are iMac 2009, tho slightly different versions, if that has any bearing on things.I created a temporary account on my new-to-me computer to make the data transfer, so that there wouldn't be an accounts conflict, as others have suggested.Western Digital External HDD, "My Book, Studio Edition," 1TB. I'm using the FireWire 800 port on the iMac. If I need to erase the hard drive on my "new" computer, I'll need a little instruction and hand-holding on that one.Â
Info:
iMac (24-inch Early 2009), Mac OS X (10.6.8)
So i bought this new 500GB external HD but whenever i tried to put my files in it from my mac it wont allow me and say, "This item could not be moved because [harddrive] cannot be modified." however if i connect it to my windows it works fine.
P.S just one stupid question, why would a 500GB HD has less capacity such as 470 or so; and sometimes 8GB USB will only have 7.5 G etc.
Will my Mac be able to use this external?
[URL]
I heard that it can't and you need to by the Mac only one. Does it make a difference?
I am not very computer savvy, and new to your community here. (also I apologize if this is posted in the wrong forum. this one seemed the most logical, but I wasn't sure.)
Just bought an external harddrive for my MacBook, and my hope was to move my itunes library, photos, and a few essential documents to the external.
what is the easiest way to do this?
Also, after I have everything backed up, I was planning on restoring the computer to factory settings, and enjoy it being "like new" with all my content on harddrive. If I did this, would I still be able to seamless access all the stuff on the external, such as my itunes library? How would this work? Is it even a good idea to restore the computer?
I use my external harddrive for Time Machine on OSX. I also happened to put other files on there too. But once I run bootcamp, it seems that Windows cannot recognize harddrive. Is that normal? And is there a way for me to reach the files in Windows?
View 8 Replies View Relatedi use my desktop for movies and creating files. but i use my laptop more often and bring it with me. so i bought an external hard drive to save all the movies and stuff off the PC. and then play them on my mac and my ps3.
View 2 Replies View Relatedhas anyone installed osx onto a external usb harddrive using a macbook air?
was wondering what the performance was like afterwards?
would help to get around internal small hd space....be good when using at home and also using external monitor....
:for those that dont know....
[URL]
I am a rookie in Mac. I have a lot of multimedia which I store on external harddrives. Recently I have experienced my iMac freezing on me, specially when I am accessing the harddrives using my frontrow application. Eventually I got a database error when receiving mail to my Entourage. It was suggested that I repair permissions using the disk utility. This I did, however it never actually repairs anything, it just lists the stuff where the permissions differ. Anyway, straight after I 'repaired' permissions, my harddrive showed empty. No files left!!! 1TB data gone .
the way I understand it, it is a possibility that the file that lists the addresses of all the files on the disk may be the one that was wiped. I am hoping the data is still there and that someone has a nifty tool that will sniff it out for me.
I bought an Iomega Prestige 1TB external harddrive a couple months ago with it running off my Macbook Pro.
I just flew down home for spring break, leaving my Macbook Pro charger at school. However, I do have the harddrive with all my backed up files. The problem is, my PC laptop (Dell, Windows XP) does not recognizes it. When I plug in the harddrive and turn it on, the computer recognizes that there is something plugged in (it gives me the option to safely remove hardware), but there is no sign of the drive anywhere.
Is there anyway my PC can read/recognize it?
I recently bought an external harddrive and its been working properly for about 2 weeks now. however, i accidently moved my iBook G4 and my external harddrive that was connected disconnected from the Mac. the error message of "please do not remove harddrive before ejecting..." popped up and since then it has not been working properly. i've read many articles and forums and nothing seems to be suited for my situation. it is a 400GB WD portable external harddrive and it plugs/runs by the USB port. the disk utility says when i try to repair disk:
"Disk Utility stopped repairing �My Passport� because the following error was encountered:
The underlying task reported failure on exit"
and i've checked the finder preferences and everything is what it is suppose to be. am i going to have to but that diskwarrior program in order to fix this? seems like there should be an easier, less expensive, way.
I have an iomega external HD. When ever I try to transfer files from my mac internal HD I get the message "the Item could not be moved because "iomega HDD" cannot be modified." This HD works fine with windows, but is doesn't seem compatible with my mac. Any way to fix?
View 4 Replies View RelatedJust about to format my external harddrive as its read only at the moment (only adjustable on a Windows machine).
I've opened disk utility and chosen my external HDD from there... my question is, which format do I use? Theres about four appearing:
Mac OS Extended (case sensitive)
Mac OS Extended (case sensitive, journaledd)
Mac OS Extended
Mac OS Extended (journaled)
Which one do I choose and why?
Ive just realised my BT homehub wireless router has a USB port, which has rather excited me as it opens up the possibility of freeing up a USB port on my MacBook, which is currently occupied by my Lacie external hardrive.
I hoped it be as simple as plugging the drive into the routers usb port and watching it pop up in finder. Alas not so. Ive plugged the drive in, but nothings showing up in OS X. What am I doing wrong?
I'm trying to format my external harddrive with disk utility to Mac OS Extended (Journaled) but it keeps coming up with this error.
View 2 Replies View Relatedtransfering files from my MacBook Pro to my external harddrive. I want to transfer my "Music"-folder to the external harddrive, but I get an error which says (translated from Danish to English): "The action can not be completed, because you do not have permission to access some of the topics"
View 7 Replies View RelatedI have an iBook G4 (1.42 ghz, 1gb - Leopard 10.5.6). I have a usb hub which has a few things plugged in (500 gb HD, mouse, ipod).
I bought a 320 gb portable hard drive. It is not recongized either through the hub or directly into either USB 2.0 ports.
I also have a G4 iMac 700 mhz. running Tiger. It does recognize the hard drive, as does my Intel iMac at work, and my friends Lenovo laptop.
My mac won't read my external harddrive's videos that I took with my Nikon. Half the videos won't play, and those are .avi files.WHY won't they play anymore and how can i retrieve them?
View 1 Replies View RelatedToday i was finishing a 7min HD Video Project for my class, on a mac tower, when i got the I/O error message while exporting it. It got worse from there. Untill today i have had no problem viewing/opening/editing files from my harddrive.
Now, i cant even open the FCP project. It says final cut pro quit unexpectedly while using the kgcore plug-in When i try to watch a quicktime file, the movie will play for a few seconds, then freeze and force quit.I try to copy any file to my desktop and it says The Finder cant complete the operation because some data in(filename) cant be read or written. (Error code -36)
I ran disk utility to verify the disk, and it says that everything appeared ok.I also ran disk repair, and it also said nothing was wrong with the harddrive.I have tried to do all of these things on 4 different computers today, 3 towers and a Mac Mini.All the same results, down to the exact second and mb of the attempted transfers and watches.
