I recently sold my macbook pro. In the meantime, I have reverted to using a 7 year old ibook (running 10.4.11) for ichat, email, etc...I have a .dmg that is a backup of the macbook pro, and I wanted to mount it and pull some files off it. Despite the fact that it would take days to mount on the ibook, I was wondering if it is possible to mount a 100GB dmg on a hardrive that is only 80GB?
View 5 RepliesI am experiencing an interesting and annoying problem. I am running OS X 10.5.6 I have (or had) a 160GB hard drive. The computer is less than a year old and I have very little on it. I had almost 100GB free on my hard drive then all of a sudden it disappeared so that I had 0 space left. Of course the computer started running very poorly so I freed up about 6GB of Hard disc space but I can't figure out where the other space went.
I tried loading programs like Whatsize and Applejack to fix the problem or figure out where all the space went, but when I try to install them I get a message that says "the following disc image failed to mount, no mountable file systems." I know these files are not corrupt...
I have also run disc utilities. When I run Verify Disc Permissions and Repair Disc Permissions, these run but they do list some "permissions differ", I dont know if this is normal of not. When I run Verify disc it stops running and says "First Aid failed" "The volume Macintosh HD needs to be repaired".
Yes, my trash is empty!
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedMy Macbook crashed recently and it just tells me to turn it off when I start it. I've exhausted all the recommended options in the manual (default settings, etc.) and unfortunately, I'm missing the first one of the Tiger installation/restoration discs . Is there any way I can access the files I need to back up using Carbon Copy Cloner on an external hard driver (which in this case would be an ipod)? It seems to think you can, but nothing on their web site seems especially clear in this. Also - I don't have access to a Mac right now, so presumably I won't be able to unpack the files the CCC DMG on Ubuntu or the ipod - not sure whether that matters or not.
View 1 Replies View RelatedI recently got infected with a trojan, and after updating my mac was told I've also picked up malware software. I moved everything I needed to my hard drive and wiped and reloaded my mac. I then checked my time machine backups on my hard drive and found the malware files on the time machine backups too. so i took what I needed off my hard drive and wiped that, but without realising have deleted my uni work folder containing my essays. Is there anyway to recover the files? I've tried using a couple of programs online but there only trials, so when I find the file I cant restore it.
Info:
MacBook Pro
I store all of my photographs on an external hard drive which I backup with my Time Capsule. My external HD crashed and I need to restore the new external hard drive with the files from the Time Capsule. When I open Time Machine I get an error message saying to connect to a current Time Machine backup disk.
Info:
MacBook & iMac, Mac OS X (10.0.x)
I just put in a new hard drive in my mac pro and every now and then when i have a issue moving files or cloning the primary drive and back the data up to the new one, I will have an error and the drive will unmount. Is this normal. I am wondering if i can make it more of a permanent mount like the primary drive.
View 12 Replies View RelatedOne of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
I have a laptop (10.6) I take on trips and a G5 (10.5) desktop that stays at home. I have a folder I keep synched between the two computers. When I get home I use my desktop to log into my laptop, pick the applicable drive and normally the drive icon mounts on my G5 desktop. Accept yesterday when I did this, no desktop icon appeared, however I did get a finder window to appear that represented this shared drive. The problem arose when I tried to synk the two drives using Synk. Even though this drive was supposed to be "mounted", there was no desktop icon for it and Synk could not see it. After fiddling, I was finally able to make an alias of this drive and put it on the desktop, and get Synk to find it, but the situation strikes me as strange. Why is this hard drive not mounting on my desktop like it usually does?
View 2 Replies View RelatedMy Mac Pro is not mounting any new hard drives for some reason. The one's already connected work fine and remain connected (I have three drives connected via eSATA ports). But I can't connect any drives via Firewire 800 or 400. I've tried differnt leads and different ports but none are connecting. I've tried the drive on a different Mac and it connected fine. But on the machine I need to connect to the drives simply dont mount. Nor do they show up in Disk Utility or Soft RAID. I have restarted and powered down several times but nothing is working.
Running OSX 10.6.8 on a Mac Pro (2008) The hard dirves I'm connecting are Lacie.
Info:
Mac Pro (2008), Mac OS X (10.6.7)
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
View 7 Replies View RelatedMy hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
I bought a brand new 500Gb WD external HDD a couple days ago and it will not mount but it shows up in disc utilities. When I go to disc utilities and try to format it for my mac I get an I/O error right away. So then I give it to my friend who also has a mac and he was able to format to HFS. I get it back and it still does not want to mount. Is there a problem with my mac or is it the HDD?
Mac Specs: Power Mac G4 "Quicksilver" 733MHz 1.25Gb RAM running 10.4.11
i downloaded a file on my main computer and wanted to install it on my mac witch should be perfectly easy but when i go to put it on my mac it wont mount to the hard drive
View 1 Replies View RelatedI have a Firelite Smartdisk external hardrive and when I plug it in via USB it wont show up on desktop. In system profiler it shows plugged in and in disk utility it shows up too. This disk has gone back and forth between a mac and PC. Works fine on PC. Cant be verified or repaired in untility because it is the wrong format? The hardrive seems fine, no clicking, powers up, etc.
View 1 Replies View RelatedToday I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies View RelatedI recently got a new MBP as well as a 500GB Lacie External HD. I partitioned the external for 10GB windows and the rest Mac. Anyway whenever I plug it in, I get the external hd on my desktop as well as another icon called Exchange that has manuals and software for both OSs inside. I always just eject the exchange and keep the external HD mounted, but its annoying that it pops up each time I turn on the external. Is there a way to set my external up so that the exchange never mounts. What do I even use this for anyway?
View 3 Replies View RelatedI have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
I've had an WD My book 500 GB external for about as long as I've had my macbook about 1 1/2 years. No trouble with it at all, until yesterday. At some point either the power got cut or the cable was pulled out incorrectly it got disconnected from the mac. Thus resulting in it not mounting now. I've tried disk repair and shutting down the macbook and restarting...plugging in after everything is started. but to no avail. I am a photographer and about 25% of my photographs I don't have backed up anywhere else. So if I can't get it to work. I need some way to get the information off and reformat. or get it working correctly.
View 2 Replies View RelatedI have a 1st generation Macbook laptop. I swapped out the original 80GB HD & installed a larger 320GB internal HD I recently bought on Ebay. At 1st, everything seemed ok, the hard drive mounted ok and I went ahead and proceeded to 1st partition the drive into 4 80GB separate partitions, with a plan to install Snow Leopard on one of the partitions, have 1 for room for a backup drive, and the other 2 partitions would host Windows 7 & possibly Linux, via (bootcamp). After experiencing some frustration with the installation of Snow Leopard, it appeared everything was ok, so then I went ahead and migrated my entire original 80GB mac factory HD over into 1 of my partitions. Everything seemed to go quite smoothly up to this point. However, soon afterwards, my HD somehow was no longer mounting! It still has not mounted ever since this time. I have tried taking the HD out and swapping it with the old one and it still will not mount. However, the original hard drive mounts right away without any issues. My entire livelihood is essentially thru my computer as an online grad student, so I went out to Frys Electronics & purchased a WD Scorpion Blue 500 GB HD after experiencing all of these issues. The new HD is working flawlessly. However, my issue and question is, what can anyone with technical knowledge suggest I do to completely erase the other non-mounting HD? I plan to send the non-mounting HD back for reimbursement to the Ebay seller soon. I'm concerned because, as I previously mentioned up above, this HD still potentially is holding all of my personal information from my previous drive I had for years installed into the macbook.
View 5 Replies View RelatedWe can see an external hard drive in disk utilities but not on desktop it's Mounting hard drive S.M.A.R.T status is functioning and its a disaster.
View 1 Replies View RelatedThere Ive been having problems mounting ISO files whilst In Boot Camp, I have a Windows computer but It's pretty old, I use Daemon Tools there But It doesn't seem to work for A Boot camped Mac.
I have a MacBook 13.3 Inch
2,13 GHz Intel Core 2 Duo-processor
2 GB RAM
160 GB Hardrive
Nvida GeForce 9400M
G5 iMac model A1058, 1.8/512mb/160gb.Bought this machine used on e-bay with no operating system, powers on fine, flashing folder with question mark= no operating system. Tried to connect to my i-book in target disk mode via fire wire and the hard drive does not mount on the desktop. Can't find it in disk utilities however i get this in system profiler under firewire.
View 15 Replies View RelatedI have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
Info:
MacBook Pro, Mac OS X (10.7.3)
why I tryed using their wireless service, which would seem screwed my Hard drive. I installed a small application from Telstra (main telecommunications company in Australia) that allows you to connect via a USB modem to the internet wirelessly. After completing the installation, it prompted me to restart and I did so. However, before it shut down a dialogue came up saying it had to clear/reset the system cache or something like that. I clicked ok (only thing i could do) and my computer restart as normal and I had internet. The problems started when my time machine tried to backup; where it stopped while "preparing to backup" and came up with an error dialogue saying something like Time failed because it couldn't find the directory. I restarted my mac once more without the USB modem attached and tried the backup again, whereby i new error came saying it couldn't mount the drive. One more restart later and I now have a Time Machine that doesn't backup or see prior backups, and a Hard Drive that not only can't be mounted but isn't recognised as even a Media device by Disc Utilities.
View 2 Replies View RelatedOk, i have a MacBook Pro, running OS 10.5.6, i have all the updates complete. My WD mybook is a 500G,.. the one with the blue circle button in the font [on/off button and blue ring light] you can see it at:
URL
this is my issue: Few days ago it just stopped mounting, I had to force reboot my computer and it hasnt come up sense.
Odd things: Disk Utilities reads that there is a drive connected, but wont mount nor give the options to mount and says that the total capacity=0 bytes [when connected by Firewire 400] when i connect it with USB2 to USB [the square USB to regular USB] it comes up the same but with total capacity = 2TB
STARTING UP: when the WD started up, or powers on, it turns on, the light goes around the ring as usual then it dims down and slowly illuminates the entire ring up and just stays all lit.
NOISES: It makes these odd [sort of soft] clicking noises when starting up,.. not sure if its done that all the time or if it just started,..
COMPUTER START UP: i have tried having it start up by powering everything down [computer and WD] and starting up the computer so the computer starts up the WD, which it does, but then it locks up my computer,..
Disk Utilities [DU]: shows the nice little yellow external WD drive icon on the left panel with the name WD [NOTE: it does not show the double icon, WD and then a sub icon with the drive name] and it wont eject the WD icon, even if the drive is no longer connected, it locks up DU and then if i try to force quit it locks up the mac.
It does give me the option to Partition/Erase and all the rest, but this is my main drive and i am a video editor,.. sort of NEED the files on the drive,.. so i am not all about erasing my data and loosing all my work.
NOTE: the Drive was never formatted, i know i was stupid not to do that,.. but we can move on from that, its in that FAT format, never partitioned or anything.
I have tried hooking it up to a PC running vista, it installed all the "New Software bs" and then never mounted or anything,.. [that was only with the USB, my pc doesnt have a firewire connection]
I have two newer WD 500G drives as well [the ones with the white bar light in the front] and they both come up fine. but if i try to link them up through the older one nothing happens [they dont mount]
what can i do to get the data off the drive? can i reformat the drive and still recover the data? If i throw it at the wall and bust it up,.. is the data still good?Was that too much details?
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I am downloading the dmg files (Mac dvd player and vlc, because somebody deleted my dvd app and I don't have the original disks) with a windows pc which is apparently fine (I've try to transfer with both memory stick and cdr) and I've used disk utility to repair the hd and to repair permissions and still nothing!
View 2 Replies View RelatedI have an external hard drive (NTFS) hooked up via firewire to a firewire audio interface, hooked up to my Macbook Pro with OS X 10.6.4. I accidentally turned off my firewire interface before ejecting the hard drive. (I have done this before, it's hard to remember I have my hard drive on sometimes, and nothing bad has happened). When I turned the hard drive back on, the mac says "the disk you inserted was not readable by this computer." I can pick "Initialize..." "Ignore" or "Eject"
If I click Initialize, I can't repair the disk or anything because it is NTFS.I tried booting into Windows 7, and it does not recognize the drive either.
How to Mount a hard drive to MAC BOOK PRO?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
