Hardware :: External Hard Drive - Exchange Keeps Mounting?
Aug 15, 2008
I recently got a new MBP as well as a 500GB Lacie External HD. I partitioned the external for 10GB windows and the rest Mac. Anyway whenever I plug it in, I get the external hd on my desktop as well as another icon called Exchange that has manuals and software for both OSs inside. I always just eject the exchange and keep the external HD mounted, but its annoying that it pops up each time I turn on the external. Is there a way to set my external up so that the exchange never mounts. What do I even use this for anyway?
View 3 Replies
ADVERTISEMENT
Sep 4, 2009
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
View 2 Replies
View Related
Apr 24, 2010
I bought a brand new 500Gb WD external HDD a couple days ago and it will not mount but it shows up in disc utilities. When I go to disc utilities and try to format it for my mac I get an I/O error right away. So then I give it to my friend who also has a mac and he was able to format to HFS. I get it back and it still does not want to mount. Is there a problem with my mac or is it the HDD?
Mac Specs: Power Mac G4 "Quicksilver" 733MHz 1.25Gb RAM running 10.4.11
View 5 Replies
View Related
Nov 1, 2008
I have a Firelite Smartdisk external hardrive and when I plug it in via USB it wont show up on desktop. In system profiler it shows plugged in and in disk utility it shows up too. This disk has gone back and forth between a mac and PC. Works fine on PC. Cant be verified or repaired in untility because it is the wrong format? The hardrive seems fine, no clicking, powers up, etc.
View 1 Replies
View Related
Jul 4, 2009
I've had an WD My book 500 GB external for about as long as I've had my macbook about 1 1/2 years. No trouble with it at all, until yesterday. At some point either the power got cut or the cable was pulled out incorrectly it got disconnected from the mac. Thus resulting in it not mounting now. I've tried disk repair and shutting down the macbook and restarting...plugging in after everything is started. but to no avail. I am a photographer and about 25% of my photographs I don't have backed up anywhere else. So if I can't get it to work. I need some way to get the information off and reformat. or get it working correctly.
View 2 Replies
View Related
Dec 12, 2007
We can see an external hard drive in disk utilities but not on desktop it's Mounting hard drive S.M.A.R.T status is functioning and its a disaster.
View 1 Replies
View Related
Apr 11, 2012
I have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 15, 2010
I just put in a new hard drive in my mac pro and every now and then when i have a issue moving files or cloning the primary drive and back the data up to the new one, I will have an error and the drive will unmount. Is this normal. I am wondering if i can make it more of a permanent mount like the primary drive.
View 12 Replies
View Related
Nov 5, 2009
I am using a macbook pro with 10.5.8, and have an external hd (freecom 320gb). I have used it for around a year and it is almost full. The other day, after attaching it to a pc - when i now attach it to the mac, it does not mount, and the warning 'this disk is not recognised' etc comes up. It shows in disk utility, but does not allow me to verify/mount it. I'm guessing the pc has reformatted it or something
What can I do?! I have looked into data rescue software, but I'm not sure - the information cannot just disappear? and I just want the drive to have the same architecture, as all my music etc was organised in particular folders.
View 4 Replies
View Related
Nov 2, 2008
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
View 1 Replies
View Related
Feb 13, 2010
I have a laptop (10.6) I take on trips and a G5 (10.5) desktop that stays at home. I have a folder I keep synched between the two computers. When I get home I use my desktop to log into my laptop, pick the applicable drive and normally the drive icon mounts on my G5 desktop. Accept yesterday when I did this, no desktop icon appeared, however I did get a finder window to appear that represented this shared drive. The problem arose when I tried to synk the two drives using Synk. Even though this drive was supposed to be "mounted", there was no desktop icon for it and Synk could not see it. After fiddling, I was finally able to make an alias of this drive and put it on the desktop, and get Synk to find it, but the situation strikes me as strange. Why is this hard drive not mounting on my desktop like it usually does?
View 2 Replies
View Related
Mar 13, 2008
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
View 7 Replies
View Related
May 14, 2009
My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
View 2 Replies
View Related
Jun 11, 2008
i downloaded a file on my main computer and wanted to install it on my mac witch should be perfectly easy but when i go to put it on my mac it wont mount to the hard drive
View 1 Replies
View Related
Dec 14, 2010
I purchased a used external, ac powered zip250 drive that's not mounting on my MacBook with the USB. I need it to transfer files from my old G4. Or is it just a dud drive?
View 1 Replies
View Related
Sep 8, 2010
Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies
View Related
Jan 16, 2009
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
View 2 Replies
View Related
Feb 18, 2010
I have a 1st generation Macbook laptop. I swapped out the original 80GB HD & installed a larger 320GB internal HD I recently bought on Ebay. At 1st, everything seemed ok, the hard drive mounted ok and I went ahead and proceeded to 1st partition the drive into 4 80GB separate partitions, with a plan to install Snow Leopard on one of the partitions, have 1 for room for a backup drive, and the other 2 partitions would host Windows 7 & possibly Linux, via (bootcamp). After experiencing some frustration with the installation of Snow Leopard, it appeared everything was ok, so then I went ahead and migrated my entire original 80GB mac factory HD over into 1 of my partitions. Everything seemed to go quite smoothly up to this point. However, soon afterwards, my HD somehow was no longer mounting! It still has not mounted ever since this time. I have tried taking the HD out and swapping it with the old one and it still will not mount. However, the original hard drive mounts right away without any issues. My entire livelihood is essentially thru my computer as an online grad student, so I went out to Frys Electronics & purchased a WD Scorpion Blue 500 GB HD after experiencing all of these issues. The new HD is working flawlessly. However, my issue and question is, what can anyone with technical knowledge suggest I do to completely erase the other non-mounting HD? I plan to send the non-mounting HD back for reimbursement to the Ebay seller soon. I'm concerned because, as I previously mentioned up above, this HD still potentially is holding all of my personal information from my previous drive I had for years installed into the macbook.
View 5 Replies
View Related
Jan 18, 2010
Os 10.4.11; G4.External drive recently stopped mounting on desktop. Does not matter which user account is tried.
View 6 Replies
View Related
Apr 2, 2012
I'm running Lion on a Macbook Pro. It doesn't recognize one of my external drives that was used on my windows based laptop when connected via the USB cable. Is there a way to mount this external drive on a mac?Â
Info:
Mac OS X (10.5.6), Macbook Pro 15
View 4 Replies
View Related
Jan 9, 2009
G5 iMac model A1058, 1.8/512mb/160gb.Bought this machine used on e-bay with no operating system, powers on fine, flashing folder with question mark= no operating system. Tried to connect to my i-book in target disk mode via fire wire and the hard drive does not mount on the desktop. Can't find it in disk utilities however i get this in system profiler under firewire.
View 15 Replies
View Related
Feb 14, 2010
why I tryed using their wireless service, which would seem screwed my Hard drive. I installed a small application from Telstra (main telecommunications company in Australia) that allows you to connect via a USB modem to the internet wirelessly. After completing the installation, it prompted me to restart and I did so. However, before it shut down a dialogue came up saying it had to clear/reset the system cache or something like that. I clicked ok (only thing i could do) and my computer restart as normal and I had internet. The problems started when my time machine tried to backup; where it stopped while "preparing to backup" and came up with an error dialogue saying something like Time failed because it couldn't find the directory. I restarted my mac once more without the USB modem attached and tried the backup again, whereby i new error came saying it couldn't mount the drive. One more restart later and I now have a Time Machine that doesn't backup or see prior backups, and a Hard Drive that not only can't be mounted but isn't recognised as even a Media device by Disc Utilities.
View 2 Replies
View Related
Feb 15, 2009
Ok, i have a MacBook Pro, running OS 10.5.6, i have all the updates complete. My WD mybook is a 500G,.. the one with the blue circle button in the font [on/off button and blue ring light] you can see it at:
URL
this is my issue: Few days ago it just stopped mounting, I had to force reboot my computer and it hasnt come up sense.
Odd things: Disk Utilities reads that there is a drive connected, but wont mount nor give the options to mount and says that the total capacity=0 bytes [when connected by Firewire 400] when i connect it with USB2 to USB [the square USB to regular USB] it comes up the same but with total capacity = 2TB
STARTING UP: when the WD started up, or powers on, it turns on, the light goes around the ring as usual then it dims down and slowly illuminates the entire ring up and just stays all lit.
NOISES: It makes these odd [sort of soft] clicking noises when starting up,.. not sure if its done that all the time or if it just started,..
COMPUTER START UP: i have tried having it start up by powering everything down [computer and WD] and starting up the computer so the computer starts up the WD, which it does, but then it locks up my computer,..
Disk Utilities [DU]: shows the nice little yellow external WD drive icon on the left panel with the name WD [NOTE: it does not show the double icon, WD and then a sub icon with the drive name] and it wont eject the WD icon, even if the drive is no longer connected, it locks up DU and then if i try to force quit it locks up the mac.
It does give me the option to Partition/Erase and all the rest, but this is my main drive and i am a video editor,.. sort of NEED the files on the drive,.. so i am not all about erasing my data and loosing all my work.
NOTE: the Drive was never formatted, i know i was stupid not to do that,.. but we can move on from that, its in that FAT format, never partitioned or anything.
I have tried hooking it up to a PC running vista, it installed all the "New Software bs" and then never mounted or anything,.. [that was only with the USB, my pc doesnt have a firewire connection]
I have two newer WD 500G drives as well [the ones with the white bar light in the front] and they both come up fine. but if i try to link them up through the older one nothing happens [they dont mount]
what can i do to get the data off the drive? can i reformat the drive and still recover the data? If i throw it at the wall and bust it up,.. is the data still good?Was that too much details?
View 1 Replies
View Related
May 4, 2010
my MacBook Air wouldn't boot up. After booting from the Install DVD and running disk utility, it said that there was a problem with the internal hard disk drive and that it needed to be reformatted and OS X reinstalled. I am now trying to backup some of my files onto a 1TB external hard disk drive using single user mode.
View 3 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Mar 1, 2012
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
View 3 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
Aug 9, 2006
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies
View Related
