OS X :: New Internal Hard Drive Not Mounting In Black Macbook?
Feb 18, 2010
I have a 1st generation Macbook laptop. I swapped out the original 80GB HD & installed a larger 320GB internal HD I recently bought on Ebay. At 1st, everything seemed ok, the hard drive mounted ok and I went ahead and proceeded to 1st partition the drive into 4 80GB separate partitions, with a plan to install Snow Leopard on one of the partitions, have 1 for room for a backup drive, and the other 2 partitions would host Windows 7 & possibly Linux, via (bootcamp). After experiencing some frustration with the installation of Snow Leopard, it appeared everything was ok, so then I went ahead and migrated my entire original 80GB mac factory HD over into 1 of my partitions. Everything seemed to go quite smoothly up to this point. However, soon afterwards, my HD somehow was no longer mounting! It still has not mounted ever since this time. I have tried taking the HD out and swapping it with the old one and it still will not mount. However, the original hard drive mounts right away without any issues. My entire livelihood is essentially thru my computer as an online grad student, so I went out to Frys Electronics & purchased a WD Scorpion Blue 500 GB HD after experiencing all of these issues. The new HD is working flawlessly. However, my issue and question is, what can anyone with technical knowledge suggest I do to completely erase the other non-mounting HD? I plan to send the non-mounting HD back for reimbursement to the Ebay seller soon. I'm concerned because, as I previously mentioned up above, this HD still potentially is holding all of my personal information from my previous drive I had for years installed into the macbook.
View 5 Replies
ADVERTISEMENT
Oct 12, 2009
i own a black macbook.
my current drive is FUJITSU MHY2250BH which came with the macbook.
I need a biggeer drive, the biggest possible, and I would like 7200rpm as i do alot of audio intensive work etc and really push the laptop.
i found a 500gb fujitsu, but the dimensions are slightly diff to my current drive.
should i make sure the dimensions are exactly the same? eg to the millimetre??
i just want to know about what specs to watch out for.
i live in uk, so dont really want to buy from a usa retailer.
also, would i be able to use my current drive as an external drive? how could i plug it into macbook? an enclousre? or just a wire?
i also have a bootcamp partition currently.
would the new drive be a simple change over? ie. no need to reinstall any app or boot camp from scratch again? i think i read that we can just use a time machine back up to put my current macbook drive state onto the new drive.
View 12 Replies
View Related
Feb 28, 2010
I currently have more HDs than my 09 MP can accommodate (already have 1 in the 2nd optical bay). Yet I keep one of the 4 bays as non essential, in case I have to troubleshoot a HD for either myself or friends/family. I also have a eSATA docking station, that is plugged in using an eSATA Sil3132 card. If I have to troubleshoot a problematic hard drive, does it make any difference if I mount it in one of the 4 internal bays, or using the eSATA dock?
View 5 Replies
View Related
Feb 10, 2012
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
View 1 Replies
View Related
Sep 8, 2010
Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies
View Related
Sep 4, 2009
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
View 2 Replies
View Related
Jul 15, 2010
I just put in a new hard drive in my mac pro and every now and then when i have a issue moving files or cloning the primary drive and back the data up to the new one, I will have an error and the drive will unmount. Is this normal. I am wondering if i can make it more of a permanent mount like the primary drive.
View 12 Replies
View Related
Nov 2, 2008
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
View 1 Replies
View Related
Feb 13, 2010
I have a laptop (10.6) I take on trips and a G5 (10.5) desktop that stays at home. I have a folder I keep synched between the two computers. When I get home I use my desktop to log into my laptop, pick the applicable drive and normally the drive icon mounts on my G5 desktop. Accept yesterday when I did this, no desktop icon appeared, however I did get a finder window to appear that represented this shared drive. The problem arose when I tried to synk the two drives using Synk. Even though this drive was supposed to be "mounted", there was no desktop icon for it and Synk could not see it. After fiddling, I was finally able to make an alias of this drive and put it on the desktop, and get Synk to find it, but the situation strikes me as strange. Why is this hard drive not mounting on my desktop like it usually does?
View 2 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Mar 13, 2008
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
View 7 Replies
View Related
May 14, 2009
My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
View 2 Replies
View Related
Apr 24, 2010
I bought a brand new 500Gb WD external HDD a couple days ago and it will not mount but it shows up in disc utilities. When I go to disc utilities and try to format it for my mac I get an I/O error right away. So then I give it to my friend who also has a mac and he was able to format to HFS. I get it back and it still does not want to mount. Is there a problem with my mac or is it the HDD?
Mac Specs: Power Mac G4 "Quicksilver" 733MHz 1.25Gb RAM running 10.4.11
View 5 Replies
View Related
Jun 11, 2008
i downloaded a file on my main computer and wanted to install it on my mac witch should be perfectly easy but when i go to put it on my mac it wont mount to the hard drive
View 1 Replies
View Related
Nov 1, 2008
I have a Firelite Smartdisk external hardrive and when I plug it in via USB it wont show up on desktop. In system profiler it shows plugged in and in disk utility it shows up too. This disk has gone back and forth between a mac and PC. Works fine on PC. Cant be verified or repaired in untility because it is the wrong format? The hardrive seems fine, no clicking, powers up, etc.
View 1 Replies
View Related
Aug 15, 2008
I recently got a new MBP as well as a 500GB Lacie External HD. I partitioned the external for 10GB windows and the rest Mac. Anyway whenever I plug it in, I get the external hd on my desktop as well as another icon called Exchange that has manuals and software for both OSs inside. I always just eject the exchange and keep the external HD mounted, but its annoying that it pops up each time I turn on the external. Is there a way to set my external up so that the exchange never mounts. What do I even use this for anyway?
View 3 Replies
View Related
Jan 16, 2009
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
View 2 Replies
View Related
Jul 4, 2009
I've had an WD My book 500 GB external for about as long as I've had my macbook about 1 1/2 years. No trouble with it at all, until yesterday. At some point either the power got cut or the cable was pulled out incorrectly it got disconnected from the mac. Thus resulting in it not mounting now. I've tried disk repair and shutting down the macbook and restarting...plugging in after everything is started. but to no avail. I am a photographer and about 25% of my photographs I don't have backed up anywhere else. So if I can't get it to work. I need some way to get the information off and reformat. or get it working correctly.
View 2 Replies
View Related
Dec 12, 2007
We can see an external hard drive in disk utilities but not on desktop it's Mounting hard drive S.M.A.R.T status is functioning and its a disaster.
View 1 Replies
View Related
Jun 6, 2012
Can I add a second hard drive to my MacBook Pro 4.1, 17 " dual core? I have a 250 g. hard drive installed and it's filling up. I also have various EXTERNAL drives that I use but am interested in the possibility of a second INTERNAL one.
View 1 Replies
View Related
Jan 9, 2009
G5 iMac model A1058, 1.8/512mb/160gb.Bought this machine used on e-bay with no operating system, powers on fine, flashing folder with question mark= no operating system. Tried to connect to my i-book in target disk mode via fire wire and the hard drive does not mount on the desktop. Can't find it in disk utilities however i get this in system profiler under firewire.
View 15 Replies
View Related
Apr 11, 2012
I have had a Lacie 500gb external hardrive formatted and used with time machine on my macbook pro for about two years now. I haven't had any problems until recently. When I plugged it in, it wouldn't mount. I opened disk utility and it was visible but showed as unmounted and I wasn't able to mount them manually from there.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Sep 15, 2010
I got a new 1tb WD internal hard drive and I took it out of the box and popped it right into my macbook pro 15". It fits and i am able to easily close the back on the computer. My only problem is that when i start up the computer, it loads for a few minutes, but 100% of the time after about 3-4 minutes i get a notice saying I did not eject the drive safely and all that. After that the internal hard drive is no longer there. I cant see it in my finder, or disk utility. BTW I am booting from my old hard drive externally. What would cause the new internal hard drive to eject itself?
View 6 Replies
View Related
Dec 14, 2010
What is the best price for a 1tb internal hard drive for a 13'' macbook pro. This macbook pro was just bought 2 weeks ago from apple store.
View 9 Replies
View Related
Apr 10, 2009
I have a 64gb ssd drive that I use to boot up my macbook pro 15(classic) and a 320 gb on my optibay. I would like to know if there is such a program like smc fan control but for internal hard drives in order to turn off or "PARK" the 320gb hd, This would help increase my battery live as well as making it more quiet.
View 16 Replies
View Related
Aug 14, 2010
I recently put a new internal hard drive in my macbook, but i need the bolts that help stable it. do you know what these screws/bolts are called and where i can purchase them? also, i tried using a t6 screwdriver to remove the same things off the hard drive that was originally in my computer, but they wouldn't budge. it was as if they were already stripped before i tried taking them off. is there a "safe" way to remove these with something else, because it doesn't fit in the enclosure i bought with those dumb bolts on it.
View 18 Replies
View Related
Feb 25, 2012
My internal hard drive is running out of space, and I want to buy a new one. But to do that, I'll have to buy a external hard drive to back up everything and then copy it back onto the new internal hard drive , right? I don't have that much budget. So can I use the old internal hard drive that I took out of my Macbook and copy everthing back into the new internal hard drive after the repalecment? so I don't need to buy a external hard drive to back up everything
Info:
MacBook Pro, Mac OS X (10.7.2)
View 9 Replies
View Related
Feb 14, 2010
why I tryed using their wireless service, which would seem screwed my Hard drive. I installed a small application from Telstra (main telecommunications company in Australia) that allows you to connect via a USB modem to the internet wirelessly. After completing the installation, it prompted me to restart and I did so. However, before it shut down a dialogue came up saying it had to clear/reset the system cache or something like that. I clicked ok (only thing i could do) and my computer restart as normal and I had internet. The problems started when my time machine tried to backup; where it stopped while "preparing to backup" and came up with an error dialogue saying something like Time failed because it couldn't find the directory. I restarted my mac once more without the USB modem attached and tried the backup again, whereby i new error came saying it couldn't mount the drive. One more restart later and I now have a Time Machine that doesn't backup or see prior backups, and a Hard Drive that not only can't be mounted but isn't recognised as even a Media device by Disc Utilities.
View 2 Replies
View Related
Feb 15, 2009
Ok, i have a MacBook Pro, running OS 10.5.6, i have all the updates complete. My WD mybook is a 500G,.. the one with the blue circle button in the font [on/off button and blue ring light] you can see it at:
URL
this is my issue: Few days ago it just stopped mounting, I had to force reboot my computer and it hasnt come up sense.
Odd things: Disk Utilities reads that there is a drive connected, but wont mount nor give the options to mount and says that the total capacity=0 bytes [when connected by Firewire 400] when i connect it with USB2 to USB [the square USB to regular USB] it comes up the same but with total capacity = 2TB
STARTING UP: when the WD started up, or powers on, it turns on, the light goes around the ring as usual then it dims down and slowly illuminates the entire ring up and just stays all lit.
NOISES: It makes these odd [sort of soft] clicking noises when starting up,.. not sure if its done that all the time or if it just started,..
COMPUTER START UP: i have tried having it start up by powering everything down [computer and WD] and starting up the computer so the computer starts up the WD, which it does, but then it locks up my computer,..
Disk Utilities [DU]: shows the nice little yellow external WD drive icon on the left panel with the name WD [NOTE: it does not show the double icon, WD and then a sub icon with the drive name] and it wont eject the WD icon, even if the drive is no longer connected, it locks up DU and then if i try to force quit it locks up the mac.
It does give me the option to Partition/Erase and all the rest, but this is my main drive and i am a video editor,.. sort of NEED the files on the drive,.. so i am not all about erasing my data and loosing all my work.
NOTE: the Drive was never formatted, i know i was stupid not to do that,.. but we can move on from that, its in that FAT format, never partitioned or anything.
I have tried hooking it up to a PC running vista, it installed all the "New Software bs" and then never mounted or anything,.. [that was only with the USB, my pc doesnt have a firewire connection]
I have two newer WD 500G drives as well [the ones with the white bar light in the front] and they both come up fine. but if i try to link them up through the older one nothing happens [they dont mount]
what can i do to get the data off the drive? can i reformat the drive and still recover the data? If i throw it at the wall and bust it up,.. is the data still good?Was that too much details?
View 1 Replies
View Related
Nov 16, 2010
After 4 years of brave use, the internal HD on my Macbook Pro has died. I'm now looking for a new one to install it myself. It's a first generation Macbook Pro (1.83Ghz - A1150). From a first google search I found this option a pretty decent one: [URL:...] Any feedback on this particular item? Is the site reliable? Also, regarding the installation of the drive itsef: I've seen some guides on how to install it and they seem a little hard to accomplish. My experience with this kind of procedure so far is related to installing ram, which seems to be really easier. Is this something that a non-experienced user can install or shall I think twice before doing such adventures myself?
View 12 Replies
View Related
