OS X Mavericks :: Mount A Second Hard Drive In File System
Aug 28, 2014
I have a 2.13GHz 13" white Macbook (Mid-2009) with a 480MB SSD, 4GB RAM and a dying SuperDrive that frankly doesn't get used very often.Â
I would like to yank the SuperDrive out (I use my iMac for any physical disk work anyway), install a smaller SSD (64GB) for the OS (+ obligatory recovery) in the primary position, and place the current SSD (or a HDD) in a SuperDrive enclosure to hold all personal files (documents, videos, music, etc...)Â
Here is the scenario I'm contemplating.Â
-64GB SSD: primary position, holds OSX + recovery
-480GB SDD: mounted on /Users/[my user name]Â
As far OSX is concerned, there's only one 544GB filesystem, spread over two disks.Â
As an experienced Linux user, I would expect to have to modify /etc/fstab to do the trick. Mac OS X 10.9 actually has a /etc/fstab.hd that tells you that the file is useless. I am wondering whether it is possible to "mount" in the Unix sense partitions in the file system so that the system only appears to have one drive and also how.Â
Info:
MacBook, OS X Mavericks (10.9.4), 4GB RAM, 480GB SSD
View 7 Replies
ADVERTISEMENT
Jun 23, 2014
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility. Â
View 14 Replies
View Related
Dec 1, 2014
First the Details:
MacBook Pro, Retina, 15-inch, Late 2013
OS X Mavericks 10.9.5
USB 3.0 External Hard driveÂ
I am currently using an external drive for my user storage. Right now I log in with a separate User account to mount the drive, log off, and then log in with my user. I am trying to remove the extra steps so I can boot my Mac and log right in. I have not found any method that pertains specifically to Mavericks, and all of the methods I have tried for older OS versions do not seem to work properly. Â
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Mavericks (10.9.5)
View 1 Replies
View Related
Jun 20, 2014
When I try to partition my hard disk, Disk Utility tells me that the file system cannot be read.
View 3 Replies
View Related
Jul 2, 2009
Just a quick question regarding external hard drives.
Does it matter what file system the hard drive is set to for me to be able to transfer data between the uMBP and the hard drive?
Currently, my 1TB external hard drive is in NTFS, but i understand Mac use FAT32? (Please correct me if I'm wrong)
View 2 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Nov 30, 2014
How do I transfer video files from one external hard drive to another external hard drive? OS X 10.9.5. I opened up each device in a finder window and tried to drag and drop from one device to the other. No luck. Next, I R-clicked on the file and requested to copy it, then R-clicked on the Finder of the destination drive, hoping to paste but that option did not present. I am able to paste a file onto the desktop from the original location but I cannot move it from there onto the destination drive. Full disclosure: I began this operation using a Windows laptop with no difficulties. Both drives are dual formatted. The destination drive is 2 Tb and has 1.5 Tb remaining space.
Info:
iMac (27-inch Late 2009), OS X Mavericks (10.9.5)
View 5 Replies
View Related
May 6, 2012
I want to have the system mount a certain dmg file before anyone logs in, is there anyway to do this
Info:
Mac Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 26, 2014
my friend internal drive failed today and i got a new Seagate 500 sata to replace itÂ
1- boot from my usb stick OSX 10.9 installer, select Disk Utlity and create 1x partition Mac OS Extended (Journaled) and got an error: File system formatter failed
2- boot from CMD + R and had exactly the same problem
3- tried another used but good internal HD and same problem
4- used my other macbook Retina and start the setup connecting the new seagate w/ Apricorn SATA-USB and reboot after setup. working fine after boot
5- installed that new seagate w/ 10.9 installed and working from my MB retina in the defective MB 13 and NEW ERROR:
"SecurityAgent may only be invoked by Apple software".i replaced over 100x internal HD on Macbook computer in the last 10 years and NEVER see that problem.. Â
View 5 Replies
View Related
Jun 20, 2010
My Mac OSX does not recognize NTFS partition.By default, I know it should at least be on read-only mode but under Finder I see the drive not even being mounted.I went to Disk Utility to see the NTFS partition, the one I installed my Windows 7 on, but it says the format is in MS-DOS(FAT) whereas I clearly see it shows as NTFS on Windows 7.There are about two files sized as 8.50GB stored on that drive so that should prove it's not clearly formatted in FAT system.
View 8 Replies
View Related
Feb 23, 2012
I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). Â I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject). Â
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile). Â
I tried a few things I read in the community using various Terminal commands but was unsuccessful. Â Â
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)Â
Info:
Mac Pro, Mac OS X (10.5.8)
View 6 Replies
View Related
Jul 27, 2010
I have an external hard drive (NTFS) hooked up via firewire to a firewire audio interface, hooked up to my Macbook Pro with OS X 10.6.4. I accidentally turned off my firewire interface before ejecting the hard drive. (I have done this before, it's hard to remember I have my hard drive on sometimes, and nothing bad has happened). When I turned the hard drive back on, the mac says "the disk you inserted was not readable by this computer." I can pick "Initialize..." "Ignore" or "Eject"
If I click Initialize, I can't repair the disk or anything because it is NTFS.I tried booting into Windows 7, and it does not recognize the drive either.
View 4 Replies
View Related
Apr 25, 2012
How to Mount a hard drive to MAC BOOK PRO?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 18, 2012
I finally updated to mac OS 10.6.8 snow leopard in prep for upgrading to lion and now my macally backup drive wont mount - what should I do?
Info:
iMac, Mac OS X (10.6.8)
View 5 Replies
View Related
Dec 29, 2008
Just bought the WD Elements external Hard drive, plugged it in... and it won't mount on my G4!
-Checked all USB ports
-Doesn't show up in Disk Utility or System Profiler
View 11 Replies
View Related
Jun 19, 2009
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies
View Related
Jul 26, 2009
I am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
View 2 Replies
View Related
Oct 5, 2009
Hello everyone. I've been using an external Western Digital My Studio (500GB) drive for the last year or so with a Core2Duo Macbook Pro, and have had no problems until this morning. The drive is used primarily for Time Machine backups, but I also have some photographs stored as well.
This morning, just after I'd begun copying some of these files to another external drive, the WD drive went down, and now will not mount/showup in Finder. It DOES show up in Disk Utility, though with the Time Machine volume grayed out. I get a "could not mount" error when I click on the "mount" icon, and nothing else I try (rebooting, unplugging drive power supply, etc). has worked. I'm trying to avoid the erase-and-reformat option, because I'd lose some potentially valuable images.
View 4 Replies
View Related
Jan 24, 2010
My LaCie BigDisc HD won't mount on the desktop of my MacBook Pro. Is there some other place I can find and open the icons, or is there another procedure to follow to correct this problem?
View 1 Replies
View Related
Jun 30, 2008
I have an older Mac G4 running OS X (10.4.11) and I have three internal hard drives, one of which will not mount. I can hear it spinning up and trying to mount, but it won't.Is it trashed? I've tried everything I know to get it to mount. Is there a way that I can at least recover some files that are on it?
View 1 Replies
View Related
May 21, 2012
I have a Lacie 1TB external hard drive that keeps disconnecting from my Time machine to back up data.how to remount, I can not find it anywhere .....
Info:
Macbook, Mac OS X (10.5.1)
View 3 Replies
View Related
May 29, 2012
Recently my WD Passport is recognized by Disc Utility but will not mount.I have tried repairing disk. What can I do?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 12, 2012
Accidentally ejected 4 partitions of the terrabyte hard drive, and it's not on my disk utility list anymore, nor will it show at start up. I've unplugged, slid it out a little, snapped it back in, but still no sign of it.
Info:Mac OS X (10.4.11), Dual 1.8 G5, 2.5 GB DDR SDRAM
View 6 Replies
View Related
Jan 20, 2010
Without warning my iMac [OS X Snow Leopard] popped up an alert saying that I should eject a drive before disconnecting it. I had done nothing to generate this error message. I clicked ok to close it and noticed my 4 month old, external 8T Mercury Elite-AL Pro Qx2 was no longer visible in my drive directory. I also noticed this external unit was making a looped grinding noise as if it was trying to write without success. I figured one of the drives failed and took it to the mac doctor. Other than a few directory errors, everything appeared to be fine, so I paid the service fee, brought it home and plugged it in only to find the same prob - obviously it's something with my iMac. Before I go spending more service fees, I wondered if anyone here could point me toward a method of discovering what might be wrong. I ran disk utility [verify and permissions] and fixed some directory errors, but don't know how to look further. iMac was home networked with a PC [Windows] and a laptop [Windows]. I did notice something wacky with the PC, but its very old and I expect it to die any day. I was running the network through the PC, so I direct connected the iMac to the router and modem but no change: still cannot see the external drives. What other info do you need to make an educated guess for me?
View 1 Replies
View Related
Feb 25, 2009
I have a LaCie 320 GB external hdd (USB 2.0) that worked perfectly until last night. Now it won't mount when I connect it to my computer, nor can I see it in Disk Utility. Disk Warrior can't see it either. I tried connecting it to my roommate's MBP with no luck.
It spins up just fine and doesn't make any clicking noises or anything like that, so I feel like there might just be some hope yet; I'm thinking it might just be a faulty USB cable or something, but I don't have a spare one to try it with.
View 19 Replies
View Related
Apr 3, 2009
Alright, so My ipod is formatted for windows when formatted in this you can only copy chunks of 4 gig things using it as an external. but if you change the formatt of it to take all sizes, then it's not compatible with mac and pc. =/ i had it originally formatted for pc because i just recently got a mac book pro and it's my primary computer. well on to the hard drive trouble that is related i'm borrowing my friends external to get a 8 gig file from my pc to my mac. it's formatted in fat32(windows and mac read) but that format only allows for a 4 gig max to be put on it at one time. so i guess i'm outta luck there, i've looked at JR split but who knows it that will work. My main q is, i'm going to be getting my own personal external soon and i want to know whats the best way to format it that it will mount on my pc and my mac and allow me to copy more that 4 gigs of stuff on it at a time.
View 1 Replies
View Related
May 26, 2010
After a lifetime of owning PC's I finally purchased a MacBook Pro running OS X. I installed Parallels Desktop 5, Windows XP, and several Windows apps to have dual functionality. Now I need to write to my NTFS ext. hard drive where I backup everything. It has 800gb of space left, so it would be a shame to get a new one just b/c I have a Mac now. I first installed MacFuse and then NTFS-3G. Now when I reboot, the ext. HD won't mount at all. What have I done wrong?
View 6 Replies
View Related
Mar 19, 2012
Running Lion. Trying to recover files from two identical, old hard drive. Both are IBM Deskstars that used to run Windows. Using a Startech USB to IDE adapter. I was able to get 1 HD to mount, but it was not the one with the files that I need. The 2nd hard drive will not mount, nor does it show up in Disk Utility. I've downloaded Data Rescue 3, Disk Drill, Stellar Phoenix and Photo Rescue. But, still no luck. I've tried to mount it using Terminal, but no luck. Please help... I'm pulling out my hair and will be bald soon.Â
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
May 31, 2012
I just installed a new internal hard drive into my macbook as my old one was failing. Before doing this I backed up all of my information through Time Machine onto a Seagate FreeAgent external hard drive. I've been using this external hard drive for the past two years and I've never had any problems with my macbook mounting it. Once I had all of my personal information backed up I took out the external hard drive and then proceeded to take out my old internal hard drive and installed the new one. I installed the Mac operating system and the Macbook started up just fine but when it came time to reload all of my personal setting using Time Machine my macbook didn't recognize that there was an external drive plugged in. I know it isn't the external drive as it mounts just fine on other laptops. how I can get my macbook to mount the drive so that I can transfer all of my information onto this new internal drive?Â
Info:
MacBook, Mac OS X (10.5.8), Seagate FreeAgent
View 1 Replies
View Related
Jun 25, 2012
I have a white screen of death and I have tried to alt, cmd, p, r and unplug peripherals and the IMac and plug them back in etc. I did get it to boot from disc and was trying to create an image of my system but it can not copy it it has an input/output error. I tried to click on burn and the hard drive is not available. It is not mounted and will not mount. It will not verify or repair either. Is there a way to copy any of my data off the hard drive to an external drive?
Info:
iMac
View 5 Replies
View Related
