OS X Mavericks :: Mac Will Not Recognize One Of EHDs
Aug 28, 2014
I purchased a new iMac just a month or so ago. I reformatted and connected my two EHD's from WD to it and they were recognized fine. A week or so later I began getting messages that the 1TB EHD was ejected improperly and I had done nothing. I just closed the notifications and did a google search and found that this is a problem with the OS and let it go. It didn't seem to be happening all that often. Begin this week and it was happening several times in an hour and now I cannot see the EHD in Finder, Disk Utility or System Profiler. I have not had any problems with this EHD until now. It is 3 or 4 years old. Is the EHD bad, or it this an apple issue? What can I do to find out?Â
Info:
iMac, OS X Mavericks (10.9.4)
View 1 Replies
ADVERTISEMENT
Sep 3, 2014
I am running OS X 10.9.4 in a MacBook Pro, Photoshop CC, and a Canon printer MG8220. I have installed the plug in Easy-PhotoPrint Pro that is advertised at the Canon site as fully supporting that printer. When I automate the plug in from Photoshop it does not work, allegedly because it does not support the printer. It may be be that in fact this is the case but Canon people insists in the compatibility. I have come to think that it may be a matter of drivers, but I have failed to determine unambiguously which one is driving the printer. Then, where can I check the drivers and/or replace them? Although this a matter between one hardware and two softwares clearly not Apple...
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 6 Replies
View Related
Jun 27, 2014
I've downloaded the most recent Image Capture software but system preferences and Image Capture still won't recognize the scanner. It might be the fault of the scanner but seeing as other people have. how to try and get my computer to recognize the scanner?
MacBook Air, OS X (10.9.2), 1.3 GHz
View 1 Replies
View Related
Aug 31, 2014
A couple of years ago I loaded all my music onto a Macbook Pro and used iTunes to load it to my iPhone. Now my computer has been stolen and so I have bought a new one with Mavericks. No matter what I do iTunes won't import and play my wma files. What do I have to do to get iTunes to recognise these files.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4), Canon 9000F scanner
View 2 Replies
View Related
Aug 23, 2014
Okay, so I'm using a late 2013 27-inch iMac, Intel Core i5, running OS X 10.10 Yosemite Beta 2. I've usually just used wifi, but decided to make the switch to a wired ethernet connection. Now the Network settings shows no option for ethernet, so I added a new ethernet connection in the settings. I was then met with a "Cable Unplugged" notice. And I have tried everything to fix it. First of all, I've tested 3 different ethernet cables, and none worked, but all three worked on my 2 Macbook Pros, both running 10.10, and there was no problem. I've cleared my PRAM, reset my power, checked that my ethernet pins weren't damaged, and every other suggestion I could find.
Info:
iMac, OS X Mavericks (10.9.2)
View 4 Replies
View Related
Aug 28, 2014
Recently, I've been trying to access my webcam but both Google Chrome, Safari, and my computer claim that it doesn't exist. I know for a fact that the camera is there, and works, having used it in the past, but all of a sudden it seems to have stopped being recognized.
I've tried changing my systems preferences and everything, and when it stopped working I hadn't changed anything. My Macbook is a Macbook OS X from 2009 running 10.9.4 and has no updates.
Info:
MacBook, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Aug 27, 2014
I just got a new MacBook Pro. I have my epson printer on my network. How do I get Image Capture to recognize that I have a printer. Nothing comes up on devices. I'm sort of stabbing in the dark at network settings and I downloaded the latest Epson driver. Nothing seems to work.
Info:
iMac, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Sep 12, 2014
I've tried plugging two different cameras into the USB, MBP recognises neither. They don't show in disk utility either. Any solutions I can try? I have tried resetting the PRAM.
Info:
MacBook Pro, OS X Mavericks (10.9.4), 13" June 2012
View 9 Replies
View Related
Dec 10, 2014
I have one hard drive that is readable and writeable on my mac desktop but read only on my mac air. I am trying to transfer all files from a couple external hard drives onto a new larger back up drive so I do not want to lose any information by reformatting.Â
Info:
iMac, OS X Mavericks (10.9.5)
View 1 Replies
View Related
Sep 4, 2014
I was trying to email someone from a certain company/vendor, but I didn't remember the reps name.Â
I knew that their business name was in their domain name though, so I tried typing that into the To: field.Â
To my surprise, Mail didn't find anything.Â
Is there a way to turn this feature on, or else can I submit it as a feature request?Â
I realize that it's possible to use the search box to search for past emails containing a domain name, but this clearly is not my intention, I wanted to compose an email ...
Info:
OS X Mavericks (10.9)
View 1 Replies
View Related
Sep 8, 2014
I am using a mid 2011 iMac 21 inch running Mavericks 10.9.4. Processor is Intel Core i5. Memory is 4GB 1333MHz DDR3. I have had a HP Color LaserJet 2600n connected since I bought the iMac new in November 2011. The printer continued to work after I upgraded from Lion. Thinking that the printer was not working I recently deleted the drivers. It simply turned out that its USB cable had become disconnected. I have since tried to reinstal it through Printer and Scanner Preferences but the iMac does not recognize it. The HP driver download page offers drivers for Lion but not for Mavericks, even though a (different) HP summary page of available drivers claims that that 2600n is supported by Mavericks.
Info:
iMac, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Sep 12, 2014
Since doing a clean install of Mavericks (which solved a ReportCrash loop problem), everything has been fine except..for some reason the 3.5mm headphone port refuses to acknowledge the existence of headphones when plugged in. The internal speakers do not cut out. No sound comes through the headphones. If I go into Systems Preferences/Sound/Output there is no option for headphones sound, just internal speakers.Â
I have tried everything (deleting .plist files and rebooting, booting in safe mode, PRAM resets etc etc). I have also tried various sets of headphones (mono, stereo and three ring headphone plugs). They all don't work on my MacBook Pro, they all do work (and make the internal speakers cut out) on my MacBook Air. It's not the headphones.Â
The port will happily recognize, charge and download my iPod nano. I am convinced this is an OS problem, as the port has not suffered any shocks, and it happened directly after a clean Mavericks install. It was working fine on Mavericks before the clean install.Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Aug 24, 2014
OS: OS X Mavericks
iPhoto: iPhoto v9.5.1 (902.17)Â
I choose a photo, select Share, select Email, enter an email address to send to and click Send - then I get this error: "The email server didn’t recognize your username/password combination."Â
In iPhoto preferences I have "Email photos using" set to "iPhoto"; I have an account added for Gmail (outgoing mail server: smtp.gmail.com; Port: 587; User Name and Password are correct for my gmail account, Use SSL is checked - basically everything is default for when I chose to add a gmail account and I'm positive my user name and password are entered correctly). I do not have 2-step verification enable for my gmail account (I've been searching for a solution online and noticed others mentioned this - this does not apply to my situation).Â
View 5 Replies
View Related
Oct 9, 2007
I bought two sticks of this RAM http://eshop.macsales.com/item/Other...g/3200DDR1024/ and put it in my Dual G5, following these instructions http://www.info.apple.com/usen/cip/pdf/g5/memory_c.pdf , but when I go to 'ABout this Mac,' it doesn't recognize that I've added RAM. I put the two sticks in slots 3 and 4 of the bottom half. I then tried putting the RAM into slots 3 on top and 3 on bottom, and then 4 on top and 4 on bottom....but it still won't recognize it. Did I do something wrong?
Information:
Dual Mac G5
Mac OS X (10.4.8)
View 16 Replies
View Related
Jan 20, 2009
I made Boot Camp partition in order to install Windows on my Mac. Therefore it is 32GB, and after all I put the XP sp2 CD, I click 'Start Installation' and the computer says that can not recognize the Windows CD. I tried with different Cd's but still the same thing appears.
View 1 Replies
View Related
Apr 8, 2009
I have 2 legit XP CDs that came with previous PCs but none are above SP1. I acquired an SP3 iso and I have burned it multiple times in multiple ways so that it is bootable. The disc is recognised but it is not recognised at the boot screen (when option is held in at restart).
View 3 Replies
View Related
May 17, 2009
When I plug my camera in then turn it on iphoto pops up and I can do anything with the pictures but how do I see just the camera without iphoto, like enabling disk use.
View 5 Replies
View Related
Mar 16, 2012
I just bought 2 new 4GB DIMMs for my Mac pro to expand the memory from 8GB to 16GB.
Here is the new arrangement: Top Riser: 4X2GBBottom Riser: 2X4GB
(I wanted to keep at least 2 slots empty just in case)
The problem: Mac will not recognize them. Every time I boot the computer it only recognizes all the Top riser memory (all the 2GB DIMMs only).
The bottom riser with the 4GB DIMMs will be shown as "empty".But...If I remove all the 2GB, only then it will recognize the 4GB ones. They are not faulty or not compatible then.In any scenario I haven't been able to go over 8GB. I did my homework, and I know they should be equal amounts of memory on both risers and preferably from the same manufacturer (which they are).
Info:Mac Pro, Mac OS X (10.6.8), 8-core Xeon 3GHz - 8Gb RAM
View 7 Replies
View Related
May 25, 2012
I'm having a problem with my MBP and am stumped; I hope someone has a solution. Here's the backstory (please bear with me; this may be a bit long in order to give you all the details). My keyboard croaked, and the 160gb hard drive was filling up, so I thought I would replace both and add more RAM while I had the beast opened up. So I did all that, successfully (I think). Prior to taking out the HD, I backed it up using Time Machine. The MBP was running Leopard. I have the original 10.4.8 disc, after which I updated to 10.5.8. Â
After swapping out the keyboard, drive and adding RAM, I fired the system up and it worked! So I inserted the Install disc, went to Disc Utilities and formatted and partitioned the 750gb new drive. When I asked the system to install the OS, it chuckled at me and did nothing. The new partitions are on the desktop, but the Install disc doesn't recognize them. I plugged my external drive in (the one that has the Time Machine backup...), restarted the MBP, and it booted from the Western Digital external drive. how can I get the system to recognize the new drive and install the OS on it?Â
Info:
MacBook Pro, Mac OS X (10.5.8)
View 15 Replies
View Related
Apr 16, 2010
Got a new HD with operating system pre-installed on it but it wont start-up? starts to do the chime but stops and no action? what am i doing wrong?
View 6 Replies
View Related
Nov 14, 2010
I have a Panasonic Camcorder, VDR D160. Neither of my Mac Books, one newer than the other, can recognise it. It does not appear on Apple's list of compatible camcorders.
View 4 Replies
View Related
Nov 4, 2007
I've been having this problem for a while (a few months), but I never remember to bring it up anywhere.
It just happened again, so here I am.
iTunes stopped recognizing that I put a CD-R in. The Mac itself doesn't even realize it, as I usually see it on the desktop when it's recognized.
They are Memorex brand, and they used to work just fine on this same Mac.
DVDs work fine, so I'm thinking it's not a faulty drive...
View 2 Replies
View Related
Jan 10, 2008
I replaced my hard drive and everything worked great for a day or two, I could transfer data off the old60 onto the new 120HD via the firewire enclosure.
I have a Tibook G4, need more space. then my pictures wouldn't load on the exterior, i've been days trolling the internet for answers, like 25 hours now. And now suddenly it can't get itunes open either. I did nothing!
i can go into the finder, navigate to my old itunes which shows that it's there (it's 7.1) and when i open it, it opens itunes4 off the new internal drive (fresh install of OSX had not been upgraded yet). (and the songs i had imported off CDs fresh into itunes4 on the new drive are gone as well, it's empty.)
same with iphoto, if i can get it to open at all, it ends up opening the application off the new drive and other aps won;t work now as well.
today i changed the home name to see if that helped (it was just left the same as the old homefolder name, thought that might explain the confusion) no change.
iphoto says it won't load, sometimes says it needs to be updated, or says files missing. (i did drag pictures and 3 .avi's off from the library that first day) or opens the new drive's copy of iphoto. itunes opens the new drive's version, and songs i imported fresh are now missing, but were there two days ago. this problem start about 5 days ago.
i reformatted the empty drive, as per instructions, when installing. was i supposed to change user names or passwords or not drag files across to the new drive?
so many questions...such a huge waste of time. pretty miserable at this stage. [URL]
View 3 Replies
View Related
Oct 9, 2008
As the title says, I've got a 15" 1.67 GHz Powerbook. I ordered a new RAM card off OWC a while ago, and just got around to installing it now. The card specifications are as follows (taken from the order invoice): SO-DIMM 1.0GB Samsung Factory PC2700 DDR 333MHz 200 Pin SO-DIMM Module M470L2923BN0-CB3 S/N: 4150092 I opened the panel in the middle of the computer's underside, aligned and slid the card into the top slot, then pushed it down and closed the computer back up. I turned the computer on a few minutes ago, only to see that it was still only recognizing 512 mb RAM. Can anyone tell me what I did wrong, or what the deal is? On the Apple website, it lists a procedure for installing Powerbook RAM that involves removing the keyboard, which I did not do, because I don't think that applies to my model.
View 2 Replies
View Related
Oct 17, 2008
I cannot get PS3 to recognize (connect) with my MacBookPro following an update to MediaLink 1.59. With the earlier version of MediaLink I could look at photos on our tv via PS3. Now I do not get the icon for MediaLink when looking at, for example, photos on PS3.
View 17 Replies
View Related
Feb 1, 2009
The local Apple Store recently replaced the logic board and power supply for my G5 iMac. Today I tried to load the system restore disc to re-install the OS etc. in an effort to prepare it to sell (I want to have all my data gone).I put in the disc. The computer took the disc but it never showed up on the desktop or finder. And yes, my system preferences are set to open a finder window when a CD or DVD is put in the drive. Ejecting it became a challenge. I tried holding down the mouse button while booting, and booting into the open firmware (got an error message when I typed "eject cd"). Resetting the PRAM failed to help. The only thing that worked was to jam a credit card in the slot and stop the disc from spinning, and the machine spit it out.
View 2 Replies
View Related
Mar 16, 2009
i'm importing video from a vio pov1. its a lipstick camera that you film sporting things with.
i downloaded divx and persia(n)?...but have a few problems. my ultimate goal is to open the file in imovie and edit it. when i open the file in quicktime...i don't get any sound. i can run the file in div x successfuly and see the video and hear the sound but i want to edit the film in imovie and save it to the compuer. persian didn't do much....i still don't know what that even does. there was no evident change after downloading it.
what are my options? also...for some strange reason...even though i imported the original file using iphoto and its saved as an event...i can't bring it into imovie. i'm guesing that this is becuase it can't recognize the original extension?
View 1 Replies
View Related
May 12, 2009
I have the most recent version of iMac 24" with a partition in the HDD to use Windows with parallels. I'm sure that the hard disk is almost full (about 3/4) but today, all the devices (mouse, printer, mac keyboard, external hard disk) are not recognized in the computer.
I was trying to startup the computer in SAFE MODE but once again, the keyboard is not recognized. I can't do nothing! Inclusive, I am available to apply a FACTORY RESTORE but when the disk 1 is inserted into the computer, I need to hit or double click the icon to run.
View 9 Replies
View Related
Jul 29, 2009
A month or so I got an iMac and it's been pretty awesome, despite two dead pixels! Today I wonder if perhaps I'm beyond help, and how in the world this could happen. This story begins with me using my Logitech MX Revolution mouse. It's a nice mouse, I really like it! When I first go the mac I promptly went to Logitech's site and downloaded the official logitech control center and everything worked out fine. Until a day ago, when I read that the logitech drivers are sort of sloppy, and using an utility such as USB overdrive, or steermouse would be better. (I decided to go for steermouse, as it looked to be more recently updated)
I uninstalled the logitech pref pane, and installed steermouse. This is where my troubles began. I couldn't quite seem to get the mouse to work properly, no matter what I tried on the menu. So I decided that, well, I guess this program is crap, and uninstalled it. When I went to reinstall the logitech pref pane, things started getting weird......................
View 7 Replies
View Related
Jul 29, 2009
I was just looking around and I found a 2gb stick DDR laptop memory (same stats as the 1gb stick already in my PB). Would the PowerBook recognize the 2gb? I didn't think anybody made 2gb DDR sticks but I managed to find one by Kingston on Amazon.
View 10 Replies
View Related
