I know how to get to the System Profile, but when I press print, it only prints the first page. I know I can save it as a .SX report (or whatever the file extension is).I want to print it to a PDF. Once I get the .SX, can I open and print that file?
View 1 RepliesHow do I print a contact report for a select group?
Info:
iMac (21.5-inch, Late 2013), OS X Mavericks (10.9.4)
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
i got a problem report pop up from Firefox today, usually it's not an issue but this came up in a strange language, one i had never seen before, every language is sent to English ive checked everything, worried somebody could be accessing my iMac from another location, did the usual net stat, last press & users commands and it hasn't come up with anything untoward, just a little worried about it cos it was really strange.
Info:
iMac, OS X Mavericks (10.9)
macbook refused to wake from sleep sometime - Mid 2010. Running Lion 10.7.4
Get this error. Interval Since Last Panic Report: 204335 sec
Panics Since Last Report: 1
Anonymous UUID: D1DBCB50-FBD2-4B25-A977-05DF5F0DBE0C
Thu May 17 20:51:15 2012
panic(cpu 0 caller 0xffffff7f809c4947): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811864f000 0x0a5480a2, D0, P3/4
[Code]...
The Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
I am trying to troubleshoot a bluetooth speaker on my Mac and I was wondering if there is a way to identify which Bluetooth profile the speaker is using (2.0, 3.0, 4.0, etc.)? Is there a way to find out this information - either in System Information or by using an app?
Info:
MacBook Pro, iOS 7.1.2
I need to get an iBook G3's system profile (CPU speed, memory, drive config., etc.), but have no video (black screen). Hard drive is ok. Can this be done in Target Disk Mode somehow? I have NO external monitor.
View 1 Replies View RelatedI hadn't used my notebook for about a week and when I turned it on the other day the password login page was missing and I noticed that the Administrator Account is also missing. I have tried to delete the two remaining accounts to see what would happen, but either I can't remember my ID name or the system won't let me delete the accounts because the admin is missing.
I have tried my Snow Leopard CD but it won't let me reinstall or run diagnostic.
Info:
MacBook Pro (13-inch Mid 2009), OS X Mavericks (10.9.4)
bought old 12-in. ibook A1005/2002 (I assume G3) at yard sale today. screen is black, but hard drive mounts in target disk mode on my eMac, working well! how can i get system info for the ibook in target disk mode? all i see is the it's running 10.4.11, hard drive size and used/free space. i'd like to know RAM, CPU speed, etc. secondly, what could be wrong? boots up with chime, no fan/other noise, stays on and keyboard lights work, but screen is black.
View 3 Replies View RelatedI'm running Mavericks on a MacBook Pro. Right now I operate everything under the admin user profile. It has been suggested that I should not be operating all of my daily work using the admin account, I should be using a standard user account, and the admin should remain for admin purposes only. Is it possible to switch the admin rights to a different user account, and then I keep the account I've been working in, have all software and preferences loaded in and make it a standard account? Or can I duplicate my admin account and use the duplicated user account for working in, and the original as the admin? Trying to keep from having to reload all software, passwords, copy work, etc. Since I don't understand this fully, not sure how to accomplish this.
View 8 Replies View RelatedI've mitigated my profile from my older iMini to my new iMini. Everything worked out fine but I've noticed that [on the new imini] I have to input my password twice. Once I log on and input my password, my profile comes up and ask me again to input the password. I also have a unsecured startup deice/item (display) message displayed once the system comes up. Can I create a new profile and basically move all my documents over to the new established profile.
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3), ..
I connect 2 Iomega external disks and in the system profile I see them under the firewire tab.
I tried them on my macbook and it found them right away.
But on the mac mini they dont get mounted or it is like it is not proberly finding them What can be the problem?
My Macbook has been running pretty slowly recently but only at log in. Its been taking ages to load my name at the top of if you try anything before is loaded my user profile I guess it just crashed. Also every now and again the wallpaper doesnt load up. Anyway to fix this is booted into safe-mode, verified the disk and repaired the permission. My work insists I use McAfee enterprise edition for Mac if connecting their servers so I am also protected from viruses and mal-ware. Its just got worse. And stranger still Safari still loads but thats all. Any other program will bounce a few times and then do nothing. Even mail, pages, dreamweaver, terminal, settings - everything. Safari is the only working program I have found that actually still loads. The internet connection works find and everything else. McAfee is sitting in my status bar so I am guessing that has also loaded properly.
View 8 Replies View RelatedI know how to create a email profile on OSX Mail to access GMail. My question is if the GMail mail will be downloaded locally to my machine or will it remain on the Google servers. I WANT it to remain on the servers, ie I only want to access my emails through Mail. Otherwise most of my HDD will fill up with email and also I will not be able to access my emails when I do not have my machine on hand. what happens when I delete an email in Mail? Will it also get deleted in GMail?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.1)
my system fonts are jacked up and fill in lines in Safari are not readable as the text is bigger than the fil in window. Also my laptop is running harder, hotter and the battery life is less than half of what it should be. I also get text overlap line to line sometimes in Safari.
I have restored my OS with a clean install and then recovered my profile from Time Machine, this is how I discovered its my profile. I added a clean profile the first time I rebuilt the mac and it ran much faster, with less hardware usage and longer battery life. Once I began to recover my profile the system was same as always slow with Safari issues mentionee earlier. I switched to the temp user account profile and the system is fast no Safari issues and less intensive activity going on, battery life good etc.
If I rebuild the mac again I am not able to recover the profile/account without issues, I would like to move just what I need to a new profile/account from Time Machine but it doesn't allow access to the original admin account for a selective restore. I would like to be much more granular about the restore and just move my documents and such. I don't want to recover the applications or application data at this point as I don't need it. I would rather re-install just the apps I need at this time. Other option would be to clean my account/profile so that it runs as it should or move everything I want (mostly documents) to a new profile for improved use.
Info:
Macbook book pro 17, Mac OS X (10.6.8), FCP7
My screen suddenly went dark. I was connected and at 100%, however, now the battery is not charging. The system report says that there is no battery installed. I am hearing "white noise" also.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
I have Macmini 2.1 2007 year
After install 4 GB RAM (work only 3 GB) i install MAC OS X 10.7.3
Now i joined Macmini to Domain Active Directory 2008 R2. Joined via standard tools.
Macmini have a local user.
How i can migrate all settings, all data local user to Domain user?
When i used MAC OS X 10.6.8 i can joined to Domain via Likewise Open, and after i can use Likewise tools for migrate.
But now, in MAC OS X 10.7.3 i can't joined to domain via Likewise... and use migrate tools.
I am using MAC OS X 10.9.4 ...
I want to change my user profile picture to a custom picture on my hard disk - but can't seem to figure out how. It only gives me the option to choose from the default pictures ...
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have updated my system to OS X Maverick and have lost the ability to "print preview" my files before saving. I frequently save files as jpeg files, as well as pdf. I have found that many of our flyers print better when saved as a jpeg but since the print preview option has been eliminated, I cannot save anything as a jpeg.
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.4)
I can't figure out how to print double sided using my MB. It works fine in windows, but I can't even find the option to do so in OS X. I'm using various different HP printers and can't do it with any.)
View 14 Replies View RelatedI need to print some stuff off of my old PowerBook that runs OS 9.2.2. The stuff is only accessible by music software running on that old Mac. My impression is that my up-to-date printer can't print from OS 9.2.2. I've got an old, portable Canon printer that I used to use with the PowerBook when traveling, but I can't get that printer to even power up. How do I print my stuff?
Info:
PowerBook G3, Mac OS 9.2.x
I get as far as File -> Print and get nothing but the spinning ball. This is happening in Pages, Numbers, and Mail -- the only three programs I've tried to print out of this morning. This is happening on just one computer. I can print the same files to the same printers from a different computer, so that should rule out file and printer problems.
I was able to print without problems over the weekend. I updated software on this computer last night, but I think it was only updates to programs like Pages, Numbers, and Safari, not operating system updates. I know Mail did not have an update. I did not have to reboot after updating. In addition, I've been having problems with Time Machine being stuck in Preparing status. I'm just reporting that in case it happens to be related, though I don't see how it would be. Because of the Time Machine problems, I shut down the machine last night after the updates, unplugged the Time Machine, plugged the Time Machine back in after waiting 10-15 seconds, and turned the computer back on.
Info:
MacBookPro, OS X Mavericks (10.9.4)
How do I print a range of pages such as: 4-7,8-12,47,67,88-91. I have a large PDF and only need 30 of the 300 pages. I want to make a new PDF-the problem is printing (making a new PDF) using various pages throughout the book. I use the Mavericks OS.
View 4 Replies View RelatedMy HP photosmart printer has stopped responding. The pinwheel comes up and freezes the computer when ever I try and access the printer, or anything to do with the printer. I have also tried going in through system preferences and the I cannot even access it. The pinwheel again pops up. I have not added any software lately. I have tried to update my software both for the Mac and the printer. There are no updates available. I am using Mac 10.5.8?
Info:
iMac, Mac OS X (10.5.8)
Running 10.10 and I'm getting all blank pages when I print through the system or say Preview. Brother MFC-4710, upgraded firmware and downloaded new drivers. What is weird though is if I open a PDF from Chrome and printer directly from Chrome, it prints fine.
I've tried it on two laptops and both have the problem.
I have set by mistake the default print orientation to landscape. How to reset the default print orientation.
OSX 10.9.4
Info:
Mac mini, OS X Mavericks (10.9.4), Thunderbolt
Mail crashes when I try to print, also TextEdit after I installed mavericks recently.
Info:
iMac, OS X Mavericks (10.9.4)
My Dell printer will not print documents. It says it is not connected and I have sure west .net as my internet.
View 5 Replies View RelatedI am using an HPdeskjetF4580 and it will not print my document. It is connected using the USB cord. Why won't it print?
Info:
MacBook Air
