OS X :: Leopard Installation Stuck At 1hr 8mins
Jul 21, 2009
I have two partitions on the hard drive of my white MacBook. On the first partition I installed Tiger with no problems but when I install Leopard on the second partition the installation is stuck at 1 hour and 8 minutes remaining and there is no disc activity and all I hear is the CPU fan. It has been stuck for half an hour now I have never had problems with the Leopard Upgrade DVD before. Before the Leopard installation I did the DVD consistent test and it appeared fine. I don't understand why the DVD is stuck.
View 3 Replies
ADVERTISEMENT
Jun 20, 2009
I tried to upgrade my MacBook from 10.4 to 10.5 but the CD has a problem. The installation failed halfway through and now I can't remove it. I pnly get a blue screen and nothing else. I want to restore 10.4 but can't get the CD out to reboot with 10.4. I'm new to Mac, now on my PC
View 1 Replies
View Related
Aug 31, 2009
I put the install disc in and went threw the windows, it started installing so I left it for a while, when I come back it has the gray apple and the spiny boot up screen, I thought no problem its just restarting after the install. Now its been like this for almost an hour. Anyone have any ideas, I'm afraid to push the power button fearing it might screw up the install.
View 2 Replies
View Related
Apr 14, 2012
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.
Info:
iMac
View 1 Replies
View Related
Sep 19, 2010
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
View 4 Replies
View Related
Mar 29, 2012
I have been trying to install mpkg files. All the packages use authentication while installing. The system doesnt do anything after authenticating. I have tried it with all the installers. Somehow the screen gets stuck at authenticating. After authenticating, it does nothing. I am not able to add new user accounts as well. The same thing happens with authentication. Each time, it asks for password and then does nothing. I am not even able to unlock the System Preferences.
Info:
iMac, Mac OS X (10.7.3)
View 5 Replies
View Related
Jun 23, 2012
SO I tried to partition the disk - 50% for Windows & 50% for Mac Use. On trying to install the Windows 7 Premuim DVD software, it comes up with a message that the correct drivers cannot be found. My main issue is that it wont release/eject the DVD anymore. I inserted but it wont eject at all.
When I shut down or cancel the installation then it does shut down but when startup reoccurs I am unable to eject & it then goes straight into the windows 7 software trying to install it again - only for it to repeat the same cycle where it cant find the drivers & if I cancel installation it just shuts off without releasing the disc. Its my 1st mac so I am a novice except for all the other gear like the ipad, ipod etc
Info:
MacBook Pro, 13.3 MacBook Pro
View 1 Replies
View Related
Jul 1, 2014
I'm trying to install OS X mavericks but I have to install Lion first to install mavericks later, Here is it, I startup at disk utility, could never fix it, but it tells me to install Lion instead of mavericks, so I go ahead and try to install Lion, The Progress bar shows it's at the end and its done, but the time goes to atleast 2 minutes, then jumps back to 30 min or more, I kept it over night, still nothing, how can I fix that?! I also tried USB Didn't work, and no I don't have the CD if I did I would've used it.
View 10 Replies
View Related
Jul 4, 2009
I recently have recieved an ibook with osx 10.3.9 that doesnt have any wireless internet. Since i have a wireless adapter, i decided to install it on so i can use this computer for internet. Since the driver for the installer is only for newer osx versions i decided to upgrade my os. I knew that my cd-rw/dvd-rom drive isnt working so i booted disk1 of the cd-installation from my old ipod. Now it wants disk 2 and when i put in my ipod with the second disk it wont continue installation.
View 2 Replies
View Related
Sep 4, 2009
I have a Macbook running OS X 10.5.5 with Safari, I'm trying to update to 10.5.8 using the Combo Update. As I start the install it displays "Configuring Installation" and gets stuck there. I've left it running for hours and nothing....
View 6 Replies
View Related
Jan 8, 2010
I went to install Windows XP via bootcamp as I no longer have a windows XP machine, but still need windows XP for a few things work related. The install failed, the CD I used was kinda scratched and it missed a few of the files during installation so I skipped them (usually not an issue as they were driver files and such). Well the installed failed and cannot complete. Now I'm stuck in a vicious loop where it wants to try and complete the install every time it boots. I'm using a non-apple keyboard, when I try to hold down what would be the equivalent of command+option+O+F it does nothing and either starts the windows installation all over or tries to continue and finish the current install. No matter what, no luck getting the windows disk to eject.
View 2 Replies
View Related
Oct 19, 2009
Question: I already have snow leopard installed on my iMac. But can I still do a CLEAN snow leopard installation onto my imac even though snow leopard is already installed?
I tried it just now like twice but I got the spinning wheel of death. It wouldn't go pass the apple sign and spinning wheel.
View 1 Replies
View Related
Dec 25, 2009
I don't know about you, but Snow Leopard's aurora is so much cooler. I used a program called "Desktop 2 Login" to change the default wallpaper for the login screen to a different wallpaper. Using this same program I changed it back to L's Aurora. (Still in 10.5). When I upgraded to snow leopard, the login wallpaper did not change. It is still stuck on L's aurora. I have used about every method besides Terminal, and it won't change.
View 3 Replies
View Related
Dec 15, 2008
A friend of mine downloaded leopard osx 10.5 off the internet, and told me it was a full version. But when i pop it in my MBP it comes up with the apple logo with the spinning loading sign at the bottom, and then the apple logo turn's into a stop sign, no disk movement no nothing just a stop sign. I'm was wondering if anyone can tell me what the stop sign is, i've tried booting it off my external hard drive but comes up with a folder sign and a question mark in the middle
View 3 Replies
View Related
Dec 25, 2008
I have a 2 GHz Intel Core Duo MacBook with 1GB of SDRAM. I have OS X Tiger v. 10.4.6, and I just recieved Leopard v. 10.5.4, and I am attempting to install it. If it makes any difference, I have my harddrive partitioned - 40GB for OS X, and 30GB for Ubuntu Linux (8.10 Intrepid Ibex), and rEFIt to switch between the two. I booted into Tiger and popped in the Leopard installation DVD. A window popped open with an icon to install Leopard. I double clicked on this, and it told me to restart. So, I pressed the restart button in the window, and the computer restarted, automatically booting into the OSX DVD.
The Apple logo popped up, with the little spinning wheel. It churned for a few minutes, then it had a kernel panic: So, I did as the notification told me, and restarted. It automatically booted into the DVD again, and the same thing happened. Next time, as a booted up, I held the eject key down, and I was able to get the DVD out. So, I'm back to where I started, but I don't have Leopard installed. There are several minor scratches on the DVD, but nothing I would expect to mess with the DVD. Another thing: I popped in the Leopard DVD, and opened the Disk Utility after this fiasco, and verified the DVD. I got this error output:
Code:
Verifying volume "disk1s3"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid node structure
The volume Mac OS X Install DVD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the "Repair Disk" button is greyed out. I don't want to go through the Apple Support Hotline.
View 7 Replies
View Related
Apr 15, 2009
this is my first posting but I am desperate and need some help Apple could not provide. Here is my situation:
- new iMac 9,1 2,93 GHz, 4 GByte, ATI Radeon 4850
- pre-installed OS: Leopard 10.5.6
I have access to a MBP and an older iMac. The MBP had a defective logic board some months ago so I decided to copy its content (after repair) to an external hard drive. I used this hard drive as my primary OS and used it with the MBP or iMac and did have the same data all the time - excellent time-saver for me. Now the new iMac was shipped yesterday. I tried to boot it from the very same external hard drive as well. It worked but there are some annoying facts I need some help to deal with: I cannot activate sleep mode with the new iMac. The graphics card seems not to work well: stuttering screen saver, slow high definition video playback, slow spaces etc. I cannot dim the monitor's backlight with F1/F2 keys nor the monitor setup. All these problems disappear when I boot from the internal HDD but that is not an option for me. It looks like the "old" Leopard installations lacks of some drivers. Is there a way to add them, is there another solution or will an update of Leopard 10.5.7 - at least most likely - solve the problem? Apple support did not feel the need to help for "exotic configurations". I was told a fresh installation of a retail Leopard copy on an external hard drive COULD work (no guarantee) but it would take me too much time to re-configure and I don't feel the desire to set up my system fresh and new like in old Windows days.
View 19 Replies
View Related
Jun 4, 2009
Well the lady I talked to at Apple apparently didn't know what she was talking about, and after 3 attempts to install Leopard onto my ibook 4g. I discovered that the laptop does not come with enough RAM to install it. So, since it was never installed, but obviously has been opened.. is it going to be hard to try and return it?
View 7 Replies
View Related
Dec 23, 2009
So I've only had my macbook pro aluminum body for about 4 months and after downloading the new system update, my laptopl just started acting weird and then it would just keep freezing with the pinwheel for extended periods of time. I've decided to verify and repair the disc, but to no avail, it didn't help. So, I backed up files in an external hard drive and erased my disc. However, after repeating to reinstall Snow Leopard at least 10 times, it keeps on telling me that it has failed to copy supported files. If I eject my installation DVD, it will just show up with a gray screen that has a folder and a question mark on it. I'm not sure what to do. I feel like I should take it over to an Apple store to consult with a Genius...but it is far from where I live. Any easy step to step advice on what I should do?
View 3 Replies
View Related
Feb 17, 2010
I've installed Snow Leopard but now my mac won't start up. (It's a early 2008 mac pro so it should be able to handle it). All that happens is it loads past the apple logo, the rainbow wheel pops up, the background loads and the search icon (magnifying glass) appears but nothing else at all beyond that. It just waits for ages (a few times that note has appeared that say's I need to restart the computer).
I've tried.
1) Re installing it
2) Reinstalling it on a different partition (that had windows on before) but nothing seems to work.
I really need to keep all my data so I want to be careful.
View 1 Replies
View Related
Mar 14, 2010
So I had an aluminum 2008 unibody macbook. I replaced the hard drive with a 320gb and it has leopard on it. I damaged it and had to get a new mac. I now have a white unibody mac. To copy every thing would be a pain. I'd rather use snow leopard. What I want to know is if I can use the reinstallation disc 10.6 that came with the white macbook to upgrade my 320gb leopard hdd to snow leopard?
View 3 Replies
View Related
Apr 30, 2012
I bought a used MaxBook (2,0 GHz Intel Core Duo , 2 GB RAM, 80GB HDD) and try to install 10.6 Snow Leopard (Family License).The MacBook HD doesn't have any data on it, as the pre-owner completely cleaned the HDD. I put the SnowLeopard CD in the CD-Drive and press the C-Button during booting and start the install process according to the dialog that shows up.The installation starts and shows me in the beginning it will take 34 minutes to install. The process continues till the countdown shows 28 minutes’ and then the installation process freezes. I only here some repeating noise from the CD-Drive but nothing happens. I tried this process now several times, I was waiting for hours that the install may continue, but no success so far.... Does somebody have any idea what I could do install 10.6 successfully? I don't think it's a license issue, but I want to add that I also own a MacMini and with the same install CD was successfully installing 10.6 on the MacMini.
Info:MacBook (13-inch), Mac OS X (10.6.8)
View 6 Replies
View Related
Oct 31, 2007
Is it possible? If I made a DMG file of my Leopard install, and restore the image to a USB flash, will it boot from the flash into the leopard install?
View 10 Replies
View Related
Jul 13, 2009
I just ordered a new MBP 13.3' and I'm trying to figure out what is the best way to move my existing Leopard installation (White Core Duo Macbook), along with all my files.
Instead of migrating however, I want to swap my existing hard drive to the one of my new Macbook Pro since it's a 320Gb 7200rpm drive.
Is this going to work if I just drop in my old hard drive to my new MBP?
View 8 Replies
View Related
Aug 24, 2009
I assume an upgrade to SL will not remove any applications i currently run, unless I do a so called "clean install", but I just wanted to be sure: What will get removed when I upgrade?
My applications that are not 64-bit compliant? Will they still work? Will my adobe software still work, or does it need an update? Does any of my applications need an update? I have some custom icons (through Candybary), will they be removed? Will all my personal preferences reset?
Basically, what will an upgrade to Snow Leopard touch and change on my system?
ATM i got Leopard installed, by the way.
View 6 Replies
View Related
Aug 27, 2009
How do I get iLife 08 (which came preinstalled) onto my Mac after I do a fresh installation of Snow Leopard (if possible)? Is it possible to do a fresh install of Snow Leopard? I've heard all sorts of things, but I don't know what to believe. Will I just have to reinstall Leopard and then install Snow Leopard? (Will I have to get all the updates [10.5.x updates] once Leopard is installed before I install Snow Leopard?)
View 15 Replies
View Related
Aug 31, 2009
I'm upgrading my mac to snow leopard but I don't really have a external hard drive to back up my data or the software to do the backup. Is it safe to do an upgrade without backing up?
View 4 Replies
View Related
Sep 7, 2009
How do I perform a Clean Installation of Snow Leopard? I mean like in erase every single thing except for the OS.
View 7 Replies
View Related
Sep 11, 2009
With Snow Leopard being so much smaller and lighter than previous versions of OS X are there still things to cleanup after a new install? Do programs like XSlimmer still do much? If there are still things to do, are there programs updates for Snow Leopard to automate this?
View 1 Replies
View Related
Nov 27, 2009
My leopard installation was giving me a lot of headache so I thought of doing a clean install. Now that Snow Leopard had been out for quite sometime and many issues solved; I thought of installing it instead of Leopard. All I did was follow the instructions to install Snow Leopard [the only option with Snow Leopard was that it did an "Archive and Install" kind of thing by default]. It did take a lot of time [1 hour?] and I was finally taken to my desktop. I looked to check if everything was okay. Though there was nothing spectacular about Snow Leopard. I shut the computer down. Today morning I get this and I can't boot.
View 4 Replies
View Related
Jan 30, 2010
I recently decided to make the jump to Snow Leopard and aside from a few side effects I was quickly able to fix I have come a across a rather annoying problem. I used to be able to press command(apple) F5 on my keyboard to raise my volume (and apple f4 to lower it). Now when I hit command F5 I get this voice over thing popping up and it's a quite frustrating. I am on a Macbook Pro and that was the key used to adjust volume prior to the upgrade. Now I learned that ctrl F5 works but I was wondering if and how I can return the function to command F5
View 1 Replies
View Related
