OS X :: Kernel Message Screen Of Death?
Sep 29, 2009
The privileges have been verified or repaired on the selected volume
Verifying volume �The Love Machine�
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length
The volume The Love Machine needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying �The Love Machine� because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
View 5 Replies
ADVERTISEMENT
Jun 17, 2010
I turned up one day to teach using the Mac Pro and the message on the screen said I had to restart my computer. After many times I gave up. I wrongly thought the hard disk failed as one of the pupils saw some water underneath the Mac from the leaking roof. I checked and formatted the hard drive inside a pc and put Windows on it. After inserting the hard drive and the OSX into the dvd drive proceeded to re-install the software, only to find exactly the same problem as before. What to check next before trying to find someone to fix it.
View 4 Replies
View Related
Sep 1, 2014
I tried to press shift, cmd and v during startup which notified that the os x version cannot be identified!
Info:
MacBook Air
View 2 Replies
View Related
Dec 29, 2009
My son asked me to look at his friend's iMac G5 and it's in a bad way. When I boot up there are scan lines and coloured pixels everywhere, goes to a blue screen and get the restart message (the one in different languages). I've booted in safe mode and run repair permissions. In safe mode the problem isn't so bad but it's still there, then on restart it has the original problem. I'm thinking it's a hardware problem, but thought I'd see if
View 2 Replies
View Related
Feb 12, 2009
I posted this in the emac forum, but since it concerns the OS....thought I'd also post here. have an older emac 700 that used to work, but now when I try to boot ...after the apple screen with spinning wheel I get the gray screen of death. I have tried lots of things, including reinstalling OS from a retail purchased 10.4 dvd. THe OS install *looks* like it is working until it goes to reboot at the end, & then hangs again. I have also tried booting off a firewire drive, again, hangs. I know that there are boot cmd-v or -s options that give readouts of what's happening, but I don't know how to pause the process & whatever messages of relevance may be present near the end disappear quickly when the screen turns gray. In the process I have also zapped the pram/nvram.....& have reset the pmu button. I'm at the end of my rope, as I'm all out of things to try. As for what I was doing when the whole thing went south on me.. I was playing with a newer Belkin usb wireless adapter & trying to find the right driver. I downloaded the Zydas zd1211 driver set, but inadvertently unpacked the 10.3 version instead of the 10.4 (which is what this emac has). It went into auto reboot & that was that.....gray screen of death. Coincidental? I dunno. I just include the detail.
View 1 Replies
View Related
Mar 1, 2010
I am running Leopard (Not Snow Leopard) on a 2005 Power PC G5 (Pre-Intel)
I keep getting the gray screen that comes down and tells me to restart my machine in 4 languages.
I have tried PRAM/NVRAM, SMU and Reinstalling the OS but no change. Sometimes this happens 5 times a day. The fans also sound like they are working overtime while the screen is coming down.
View 20 Replies
View Related
Jun 27, 2014
I've been experiencing the "gray screen of death" every time I've turned on my laptop. What would occur is that after I press the on button, I would hear the two dings and a gray screen with a metallic apple logo and a gray pinwheel would appear. It would stay on for however long I've had the patience for it (more than an hour) and disabled me from using my computer. After doing some research, I've tried everything I could besides for rebooting the computer to factory mode. I've tried doing a safe boot by pressing the shift button upon turning on the computer but this didn't work because the booting loading bar would appear and then disappear midway. I've tried doing a repair on my hard drive using disk utility.I've even tried reinstalling Mac OS X (Snow leopard), which was successful, but upon restarting my computer, I was greeted with the same gray screen and nothing appeared to have changed. I have also tried resetting the PRAM but that didn't work either.
View 1 Replies
View Related
Oct 11, 2010
I am currently stuck on the grey screen of death with the flashing ? file folder.I have tried resetting the pram etc. and when i boot from my snow leopard disk the disk utility does not recognize my HD. Is there anything else I can do to fix this? Or try?
View 2 Replies
View Related
Dec 31, 2009
I just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
View 3 Replies
View Related
Mar 11, 2010
I have read lots of posts regarding the WSOD and know the fixes etc. But I have just bought a brand new mac mini (intel 2.4 GHZ dual core, 160 GB hd) with Snow Leopard and ilife etc all preinstalled. When switching this on for the very first time I got the white screen of death and had to hold the power button to restart it... then it booted fine and I was able to set it up.
View 6 Replies
View Related
May 30, 2010
About two weeks ago I'm using my snow leopard partition of my macbook pro and browsing the internet via firefox. My mouse freezes for a second, and then my computer just shuts down. I power back up my macbook pro to find a 'cancel or prohibitory symbol'. Strange thing is I can hold down option and boot into my windows partition no problem I go through all the motions suggested by the apple website, such as resetting the PRAM etc.. Nothing works. Flash forward to today. I finally get a hold of my snow leopard installation disc and boot my macbook with it. I run the disk utility and it finds that my hard drive's good to go.
I read online and it seems that the best option would be to install snow leopard again. I decide install it again, but about halfway through the installation, the installation fails and pretty much freezes. I had to shut down the macbook via the power button. Now, whenever I try to boot up my macbook I hear the chime, but nothing happens after that. I am just left with a grey screen. I cannot enter safe mode, single user mode, and when I try to choose the start up disk by holding down option, the arrow pops up to choose which disk to pick, but there are no disks to choose from.
View 22 Replies
View Related
Oct 2, 2009
I had got my Mac a couple of years ago, and it worked fine for a while. Just here recently programs have been shutting down for no apparent reason. I had done all the updates until then. So anyway, I found my disks that came with the Mac and used the one labeled Additional Software & Apple Hardware Test. This test said that I had a memory problem. Then I used the disks Labeled Mac OS X Install Disk 1 to begin reinstalling the program without loosing any of the saved files.
While it was running the disk, I ended up with the "blue screen of death". So then I manually shut the system down and booted it back up and then selected it to Erase and Install. Still the "blue screen of death". I have done this several times now and as far as it has got is checking the system and then it gets to the Duetch language thing and then to the "blue screen of death". I can't even get the disk out of the disk drive.
View 5 Replies
View Related
Dec 7, 2010
As the title says, every time I reboot I get the multi-language kernel panic message (You need to restart your computer. Please hold down the power button for....). I've managed to get into the GUI by using different combinations of keys. I can't remember what they are (it's been different every time), but I believe one time it was holding 'x'. This time, I held Command+V to run what looked like a diagnostic POST (I actually did this to see where in the bootup it hanged, but instead it booted to GUI).
Any idea what this could be? I don't think anyone has added any third-party RAM (this was not my machine originally, I took over a position for another person), is there a way I can check if any RAM has been added?
I'm running 10.5.8 with 2GB 667 MHz DDR2 and a 2x2.66 Dual Core Intel Xeon.
Here's the Problem Report for Mac OS X Kernel:.................
View 4 Replies
View Related
Dec 1, 2010
just posting for some basic advice, or technical help.... I keep getting a grey screen of death its happened 3 times in the past 2 weeks, the computer resets ok and then works fine for a while .... but i don't know whats going on ... or how to check for any problems ? ? I never had this problem before, I have discovered a small dent in my rear cover near the CD drive slot, I dont know when this has occured, maybe recently ... but its minor... almost invisible ... the laptop hasn't been dropped or anything like that and I assume its happened whilst in my bag so no serious shock .... ..I don't know if this has any bearing on anything �I got a report and have posted it below : it says its processor ? ?Tbh Ive found this laptop to be very slow on certain things since I have had it, esp when launching finder �. or the dashboard, it take forever to fill in the information and finder takes ages to fill in the mb in each folder or to load the app icons and often crashes , which Iwouldnt expect with a I7 ... but this has been like it since the start so assumed it a osx bug ..., can anyone suggest anything ? ? or what i should do, i dont want this happening in the middle of working on a video project etc .
View 1 Replies
View Related
Aug 11, 2008
I'd been noticing recently that my mini would periodically give me the gray screen of death when I'd boot it up, but after holding down the power to shut it down and restarting everything would be fine. I didn't think too much of it. I just moved out of my old place and into my new place and now my mini is doing it much more frequently. I just hooked it up for the first time since moving and I had to do the shut down/start up process three times before I got into OSX.
Then I shut down OSX just to try it again... same exact results. It took three restarts to be able to boot up again. Does anybody know what might cause something like this? The only thing I can think of is that maybe something is up with the RAM. I did upgrade the RAM to 2x2 gig of OWC memory a few months back, but never saw anything like this happening. When the computer is running I haven't noticed any strange issues.
View 5 Replies
View Related
Feb 22, 2009
Today, when I have been playing Warcraft III, randomly everything will freeze and I will get a blue screen of death error for a fraction of a second, then my laptop will restart.
I am currently playing on a Macbook Pro with bootcamp for windows XP with service pack 2.
View 1 Replies
View Related
Jan 8, 2010
This has been going on for a while. It happened first a month or so ago.
I turn on my 2008 iMac 24". The screen turns white like always, but no Apple icon appears. It starts to make a loud nice again and again. Bip, Bip. Pause. Bip, Bip, Pause. Bip, Bip. Pause.
I turn it off. Turn it on again. Same thing happens. Repeat.
I take out the cable powering the computer and go to school. I put it back in when i returned and turned the computer on. It worked fine.
Nothing happened again until a week after. I was sitting working on the computer, when it out of nowhere shows the "grey screen of death". I turn off the computer, take out the cable, leave it out for half and hour or so, then turn the computer on. It works fine. Works for a week. Same thing happens again.
Now it starting to appear more often tht though, and I'm afraid to turn it on until i get an external HD so i can Time Machine, in case it will appear more often for every time i turn it on.
The guarantee is not valid anymore (never purchased AppleCare) and i can't bring it to a store and show them what it does, because it doesn't always happen.
I read that it might a kernel panic somethingsomething, and that i need to wipe the HD. Though that was when the computer had the grey screen all the time. Not just occasionally like on mine.
View 3 Replies
View Related
Jan 25, 2010
I think my hd went out. I have a G4 dual 1ghz (pretty sure, can't see it right now) mdd, os 10.411, and it froze up so I did a hard restart: hold the power button for 10 seconds till it shuts off. When I turned it on the next time it would not boot up. Gray screen withe the spinning wheel of bars like it is thinking, searching, and longing to start up. Booted from the install cd to access the hd, but it acts like it wants to install the os fresh.
View 3 Replies
View Related
Mar 12, 2012
I've recently been experiencing regular White Screen of Death's on my MacPro Eight-core. It has been occuring for the past 5 days or so, with no apparent logical explanation (It has often happened whilst the machine is idling, but has also happened whilst I have been using it for various things). I've got a copy of the report, which I'll summarise below:Â
panic(cpu 12 caller 0x544745): "I/O Kit: Unrecoverable deadlock. "@/SourceCache/xnu/xnu-1504.15.3/iokit/Kernel/IOService.cpp:1075
Backtrace (CPU 12), Frame : Return Address (4 potential args on stack)
0x8b633df8 : 0x21b837 (0x5dd7fc 0x8b633e2c 0x223ce1 0x0)
0x8b633e48 : 0x544745 (0x5e5308 0x1 0x8b633e78 0x107fc)
[code]....
View 3 Replies
View Related
Mar 22, 2012
My Macbook Pro display all of a sudden went to the 'white screen of death' as I've heard others refer to it as. I've tried zapping PRAM, resetting SMC etc. to no avail. When I connect an external monitor, I am able to use the Macbook without problem, so I know it is video card/controller/display related issue. I'm going to send the Mac in for repairs. But before doing so, I'd like to erase my hard drive so I'm not sending them all of my data with the computer. I've done a time machine backup, so all is fine there as well.Â
My problem, is that in order to erase the hard drive, I need to boot from the OSX install disk. No matter what I try, I can't do this with my external display. If I insert the disk, and hold down the C, my Mac never recognizes the external display plugged in and so I cannot see to get to the disk utility tools on my OSX install disk. I've tried using Command-display dim button, to no avail.Â
I've tried simulating a clamshell mode boot where I close the lid as soon as the boot starts (with the OSX install disk in the drive) and I get a kernel panic every time. Even if I didn't, I don't see how I can close the lid at startup and hold down the C key at the same time. Â
Info:
MacBook Pro, Mac OS X (10.6.7)
View 2 Replies
View Related
Apr 5, 2012
Today I upgraded a MacBook Pro from 10.6 to 10.7.3 and every time I try to shut it down or reboot it will go to the gray screen of death and ask to be powered down manually. On reboot it gives an error report.
Here it is:
Interval Since Last Panic Report: 2344 sec
Panics Since Last Report: 8
Anonymous UUID: 731B3211-37FB-4C90-9D90-C15739B5E84C
Thu Apr 5 17:26:25 2012 .....
I've tried to verify/fix permissions/disk but that didn't work. I even reinstalled Lion, but not from a fresh install. I'm trying to avoid a fresh install as this machine is used by many different people and it would be a pain to reinstall everything that is currently installed on it. This machine does have Deep Freeze installed. Could this be related to the issue? Even though the kernel panics on shutdown/reboot Deep Freeze is still able to save it's changes and boot thawed or frozen. Conversely, I have also tried to run a thunderbolt stability update and it can not complete due to the kernel panic.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 5, 2012
I frequently get a blue screen of death after waking from sleep. I have to restart the computer to resolve the issue. This problem only began about a week ago, long after I updated to 10.7.4 on my iMac.
Info:iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Jul 26, 2010
My imac has started to have a kernel panic all the time lately. It is where the whole screen will go darker and then a box in all different languages comes up saying I need to restart the computer. I have a couple of questions in relation to this, first if I reinstall and then back up from timemachine will I have the same issue again? If I do a fresh install and reimport all my music and vids manually will that be a better way to do things?
View 3 Replies
View Related
Feb 25, 2010
I was trying to help my husband with his phone. I followed the phone's manufacturer's suggestions and it told me load software for managing it. When I went to install it the computer told me it had 59 things to install. It was late, I was tired and shouldn't have been doing this at this time. I did, when it was done installing we had a kernel panic. I am in a different country, in a village. No MacStore! I am frightened and worried. I am computer literate for a person my age, but still. If it is to be resolved I will have to do it and I wish the kids were here with their friends. I am hoping someone will be able to talk me out of this predicament.
I have tried to press the shift key for safe mode. No result. I have tried another one that has me pressing some buttons while loading and text comes up and I am supposed to type in FSCK -fy However this could not be done as the cursor was there, but no text was appearing. I think that is all I have tried. I do have my MacBook here and it is slightly older than his. I may have a firewire that may work to run his off of mine. I don't know. Can't you come in like Verizon did years ago and fix it right in front of me over the internet?
View 1 Replies
View Related
Apr 20, 2012
What can I do when my computer doesn't boot and it appears a message "panic kernel"?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7)
View 5 Replies
View Related
Jul 11, 2010
A little while ago I build my own SATA drive using an enclosure from Addonics, and two 750GB Seagate drives. I had it connected with eSata to my Mac Book Pro 2.0 Core Duo, and using RAID 1 mirroring. The eSata card is a Wiebetech Express 34 card. Everything had been working fine and dandy, until one day I plugged the enclosure in, and I suddenly got the grey screen of death telling me to shut down my computer. After restarting, I tried plugging the drives in again, only to get the same thing. So after all manner of switching cables, eSata cards, and reinstalling drivers, I still had the same result. So I tried something else - I took out one of the Seagate drives and threw it in a Firewire 400 single enclosure made by Acomdata. After turning that drive on, I still got the same error message. I tried the other mirrored drive, and again, the same grey screen of death. So at this point I wondering if both my drives, with the exact same data on them, are completely corrupt. Neither one of them is making that terrible clicking sound that seems to happen to dying drives. But I can't fathom what happened to both drives that would cause such an error. I created a mirrored setup for the exact reason that if one drive failed, surely I would have the other one left. Can anyone shed some light on this situation? I am totally prepared to pay for data recovery on these drives, but it would really help to know what I'm dealing with here.
View 1 Replies
View Related
Jun 28, 2012
I've had my iMac, 27" 3.4 Ghz i7 16GB, since Jan 2012. From my excitement of having 2TB, I put all my info from every hard-drive ever owned on it, deleting the originals with the faith that I can trust it till I purchase a 2TB external for the backup.Â
Two months later it crashed showing the 'grey screen of death' and got stuck with every restart on the welcome-screen (grey apple logo with the circuling loading graphic underneath) only with a new loading bar in below them. The service center claimed the HD crashed, and replaced it (and it took me more than a month going around finding a place that would recover the data before they could replace the HD)Â
I finally receive it after a long period of living on this earth without a computer (which is problematic for a freelancing graphic designer) and 4 days later crashes again the same exact way, this time the service center claimed it was a software problem but got it fixed.Â
I've received it yesterday again and I only downloaded trusted software (VLC, DIVx...) and did not dare transfer any old data and stuck to only surfing the net catch up to what life I've been missing out on. It is still crashing but restarting fixing it.Â
The only thing common with all 11 'crashings' is safari was open, and I really doubt and do hope that it's not the problem.
View 5 Replies
View Related
Oct 1, 2010
The other day my 1st gen MBP functioned without any probs, until it suddenly powered down. After I removed the question marks from my eyes, I offcourse tried to reboot it.
But it never makes it beyond the grey screen, sometimes untill the apple logo, sometimes not even that far.
Offcours I googled around first to gather some info before I decided to put this problem down on this board. I found this could be a HDD failure, but in those cases, with other people, it could be powered holding apple + s, and doing some checks that way.
Mine doesn't even come that far
I have a second hand 1st gen MBP with upgraded HDD and RAM, snow leopard, and coincidently since last week no more battery... so i may have powered down a completely unprepared mac by tripping over the wire, once or twice...
View 4 Replies
View Related
Nov 8, 2008
My friend updated her 13" Black MacBook yesterday, specifically the "Digital Camera Raw Compatibility Update 2.3". After a reboot, she got the Apple "Blue Screen of Death", with no login window showing. Looking at system.log, there's a section that looks to be the culprit (this began after restarting due to the install of the update):
Nov 7 13:55:29 Philbert /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started
Nov 7 13:55:30 Philbert /usr/sbin/ocspd[53]: starting
Nov 7 13:55:35 Philbert kernel[0]: display: Not usable
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer[50]): Exited abnormally: Hangup
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 6 seconds
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer[64]): Exited abnormally: Hangup
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer[67]): Exited abnormally: Hangup
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:56:02 Philbert com.apple.launchd[1] (com.apple.WindowServer[70]): Exited abnormally: Hangup
Here are some things I've observed/tried, many from sources via the Internet:
- I'm able to login in single-user mode
- I'm not able to login in Safe Mode (hangs on white screen with Apple logo)
- I've tried booting off the 10.5 install DVD and running Disk Utility - verify/repair disk, this comes back ok. However, if I try to verify/repair permissions, it runs for about 10 - 20 mins then freezes. I let the frozen process run overnight (10-12 hours) and no feedback. I can move the mouse, but I cannot select anything.
- When the laptop is booted and on the blue screen, I can connect to it via AFP
- I've tried manually changing the permissions of "/", by doing - chmod 775 /; chmod 1775 /;
- I've tried removing the com.apple.WindowServer.plist and com.apple.loginscreen.plist files in case they were corrupted by the update
- I tried running the "installer" command to re-install the update package from the command line. I run it with the "verbose" flags, I get no output and the process hangs.
Since I can connect via AFP I figure I'll be backing the data up and re-installing OS X. Pretty lame though, considering this failure was caused by running a Software Update. Anyone have a last minute suggestion for me before I go down that path?I've attached the full system.log.
View 10 Replies
View Related
Apr 18, 2012
my macbook pro is stuck on the kernel panic message, and i tried to restart a lot of times but it doesn't work my mac doesn't start?
Info:
MacBook Pro (13-inch Early 2011)
View 1 Replies
View Related
